2015-12-08 08:52:46 +08:00
|
|
|
QuerySubscriptionPool = require '../../src/flux/models/query-subscription-pool'
|
|
|
|
DatabaseStore = require '../../src/flux/stores/database-store'
|
|
|
|
Label = require '../../src/flux/models/label'
|
|
|
|
|
|
|
|
describe "QuerySubscriptionPool", ->
|
|
|
|
beforeEach ->
|
|
|
|
@query = DatabaseStore.findAll(Label)
|
feat(mail-rules): Per-account mail rules filter incoming, existing mail
Summary:
Originally, this was going to be a totally independent package, but
I wasn't able to isolate the functionality and get it tied in to
the delta-stream consumption. Here's how it currently works:
- The preferences package has a new tab which allows you to edit
mail filters. Filters are saved in a new core store, and a new
stock component (ScenarioEditor) renders the editor. The editor
takes a set of templates that define a value space, and outputs
a valid set of values.
- A new MailFilterProcessor takes messages and creates tasks to
apply the actions from the MailFiltersStore.
- The worker-sync package now uses the MailFilterProcessor to
apply filters /before/ it calls didPassivelyReceiveNewModels,
so filtrs are applied before any notifications are created.
- A new task, ReprocessMailFiltersTask allows you to run filters
on all of your existing mail. It leverages the existing TaskQueue
architecture to: a) resume where it left off if you quit midway,
b) be queryable (for status) from all windows and c) cancelable.
The TaskQueue is a bit strange because it runs performLocal and
performRemote very differently, and I had to use `performRemote`.
(todo refactor soon.)
This diff also changes the EditableList a bit to behave like a
controlled component and render focused / unfocused states.
Test Plan: Run tests, only for actual filter processing atm.
Reviewers: juan, evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D2379
2015-12-23 15:19:32 +08:00
|
|
|
@queryKey = @query.sql()
|
|
|
|
QuerySubscriptionPool._subscriptions = {}
|
2015-12-08 08:52:46 +08:00
|
|
|
|
|
|
|
describe "add", ->
|
|
|
|
it "should add a new subscription with the callback", ->
|
|
|
|
callback = jasmine.createSpy('callback')
|
2016-01-09 06:31:33 +08:00
|
|
|
QuerySubscriptionPool.add(@query, callback)
|
feat(mail-rules): Per-account mail rules filter incoming, existing mail
Summary:
Originally, this was going to be a totally independent package, but
I wasn't able to isolate the functionality and get it tied in to
the delta-stream consumption. Here's how it currently works:
- The preferences package has a new tab which allows you to edit
mail filters. Filters are saved in a new core store, and a new
stock component (ScenarioEditor) renders the editor. The editor
takes a set of templates that define a value space, and outputs
a valid set of values.
- A new MailFilterProcessor takes messages and creates tasks to
apply the actions from the MailFiltersStore.
- The worker-sync package now uses the MailFilterProcessor to
apply filters /before/ it calls didPassivelyReceiveNewModels,
so filtrs are applied before any notifications are created.
- A new task, ReprocessMailFiltersTask allows you to run filters
on all of your existing mail. It leverages the existing TaskQueue
architecture to: a) resume where it left off if you quit midway,
b) be queryable (for status) from all windows and c) cancelable.
The TaskQueue is a bit strange because it runs performLocal and
performRemote very differently, and I had to use `performRemote`.
(todo refactor soon.)
This diff also changes the EditableList a bit to behave like a
controlled component and render focused / unfocused states.
Test Plan: Run tests, only for actual filter processing atm.
Reviewers: juan, evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D2379
2015-12-23 15:19:32 +08:00
|
|
|
expect(QuerySubscriptionPool._subscriptions[@queryKey]).toBeDefined()
|
|
|
|
|
|
|
|
subscription = QuerySubscriptionPool._subscriptions[@queryKey]
|
2015-12-08 08:52:46 +08:00
|
|
|
expect(subscription.hasCallback(callback)).toBe(true)
|
|
|
|
|
|
|
|
it "should yield database changes to the subscription", ->
|
|
|
|
callback = jasmine.createSpy('callback')
|
2016-01-09 06:31:33 +08:00
|
|
|
QuerySubscriptionPool.add(@query, callback)
|
feat(mail-rules): Per-account mail rules filter incoming, existing mail
Summary:
Originally, this was going to be a totally independent package, but
I wasn't able to isolate the functionality and get it tied in to
the delta-stream consumption. Here's how it currently works:
- The preferences package has a new tab which allows you to edit
mail filters. Filters are saved in a new core store, and a new
stock component (ScenarioEditor) renders the editor. The editor
takes a set of templates that define a value space, and outputs
a valid set of values.
- A new MailFilterProcessor takes messages and creates tasks to
apply the actions from the MailFiltersStore.
- The worker-sync package now uses the MailFilterProcessor to
apply filters /before/ it calls didPassivelyReceiveNewModels,
so filtrs are applied before any notifications are created.
- A new task, ReprocessMailFiltersTask allows you to run filters
on all of your existing mail. It leverages the existing TaskQueue
architecture to: a) resume where it left off if you quit midway,
b) be queryable (for status) from all windows and c) cancelable.
The TaskQueue is a bit strange because it runs performLocal and
performRemote very differently, and I had to use `performRemote`.
(todo refactor soon.)
This diff also changes the EditableList a bit to behave like a
controlled component and render focused / unfocused states.
Test Plan: Run tests, only for actual filter processing atm.
Reviewers: juan, evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D2379
2015-12-23 15:19:32 +08:00
|
|
|
subscription = QuerySubscriptionPool._subscriptions[@queryKey]
|
2015-12-08 08:52:46 +08:00
|
|
|
spyOn(subscription, 'applyChangeRecord')
|
|
|
|
|
|
|
|
record = {objectType: 'whateves'}
|
|
|
|
QuerySubscriptionPool._onChange(record)
|
|
|
|
expect(subscription.applyChangeRecord).toHaveBeenCalledWith(record)
|
|
|
|
|
|
|
|
describe "unsubscribe", ->
|
|
|
|
it "should return an unsubscribe method", ->
|
2016-01-09 06:31:33 +08:00
|
|
|
expect(QuerySubscriptionPool.add(@query, -> ) instanceof Function).toBe(true)
|
2015-12-08 08:52:46 +08:00
|
|
|
|
feat(mail-rules): Per-account mail rules filter incoming, existing mail
Summary:
Originally, this was going to be a totally independent package, but
I wasn't able to isolate the functionality and get it tied in to
the delta-stream consumption. Here's how it currently works:
- The preferences package has a new tab which allows you to edit
mail filters. Filters are saved in a new core store, and a new
stock component (ScenarioEditor) renders the editor. The editor
takes a set of templates that define a value space, and outputs
a valid set of values.
- A new MailFilterProcessor takes messages and creates tasks to
apply the actions from the MailFiltersStore.
- The worker-sync package now uses the MailFilterProcessor to
apply filters /before/ it calls didPassivelyReceiveNewModels,
so filtrs are applied before any notifications are created.
- A new task, ReprocessMailFiltersTask allows you to run filters
on all of your existing mail. It leverages the existing TaskQueue
architecture to: a) resume where it left off if you quit midway,
b) be queryable (for status) from all windows and c) cancelable.
The TaskQueue is a bit strange because it runs performLocal and
performRemote very differently, and I had to use `performRemote`.
(todo refactor soon.)
This diff also changes the EditableList a bit to behave like a
controlled component and render focused / unfocused states.
Test Plan: Run tests, only for actual filter processing atm.
Reviewers: juan, evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D2379
2015-12-23 15:19:32 +08:00
|
|
|
it "should remove the callback from the subscription", ->
|
|
|
|
cb = ->
|
|
|
|
|
2016-01-09 06:31:33 +08:00
|
|
|
unsub = QuerySubscriptionPool.add(@query, cb)
|
feat(mail-rules): Per-account mail rules filter incoming, existing mail
Summary:
Originally, this was going to be a totally independent package, but
I wasn't able to isolate the functionality and get it tied in to
the delta-stream consumption. Here's how it currently works:
- The preferences package has a new tab which allows you to edit
mail filters. Filters are saved in a new core store, and a new
stock component (ScenarioEditor) renders the editor. The editor
takes a set of templates that define a value space, and outputs
a valid set of values.
- A new MailFilterProcessor takes messages and creates tasks to
apply the actions from the MailFiltersStore.
- The worker-sync package now uses the MailFilterProcessor to
apply filters /before/ it calls didPassivelyReceiveNewModels,
so filtrs are applied before any notifications are created.
- A new task, ReprocessMailFiltersTask allows you to run filters
on all of your existing mail. It leverages the existing TaskQueue
architecture to: a) resume where it left off if you quit midway,
b) be queryable (for status) from all windows and c) cancelable.
The TaskQueue is a bit strange because it runs performLocal and
performRemote very differently, and I had to use `performRemote`.
(todo refactor soon.)
This diff also changes the EditableList a bit to behave like a
controlled component and render focused / unfocused states.
Test Plan: Run tests, only for actual filter processing atm.
Reviewers: juan, evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D2379
2015-12-23 15:19:32 +08:00
|
|
|
subscription = QuerySubscriptionPool._subscriptions[@queryKey]
|
|
|
|
|
|
|
|
expect(subscription.hasCallback(cb)).toBe(true)
|
|
|
|
unsub()
|
|
|
|
expect(subscription.hasCallback(cb)).toBe(false)
|
|
|
|
|
|
|
|
it "should wait before removing th subscription to make sure it's not reused", ->
|
2016-01-09 06:31:33 +08:00
|
|
|
unsub = QuerySubscriptionPool.add(@query, -> )
|
feat(mail-rules): Per-account mail rules filter incoming, existing mail
Summary:
Originally, this was going to be a totally independent package, but
I wasn't able to isolate the functionality and get it tied in to
the delta-stream consumption. Here's how it currently works:
- The preferences package has a new tab which allows you to edit
mail filters. Filters are saved in a new core store, and a new
stock component (ScenarioEditor) renders the editor. The editor
takes a set of templates that define a value space, and outputs
a valid set of values.
- A new MailFilterProcessor takes messages and creates tasks to
apply the actions from the MailFiltersStore.
- The worker-sync package now uses the MailFilterProcessor to
apply filters /before/ it calls didPassivelyReceiveNewModels,
so filtrs are applied before any notifications are created.
- A new task, ReprocessMailFiltersTask allows you to run filters
on all of your existing mail. It leverages the existing TaskQueue
architecture to: a) resume where it left off if you quit midway,
b) be queryable (for status) from all windows and c) cancelable.
The TaskQueue is a bit strange because it runs performLocal and
performRemote very differently, and I had to use `performRemote`.
(todo refactor soon.)
This diff also changes the EditableList a bit to behave like a
controlled component and render focused / unfocused states.
Test Plan: Run tests, only for actual filter processing atm.
Reviewers: juan, evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D2379
2015-12-23 15:19:32 +08:00
|
|
|
expect(QuerySubscriptionPool._subscriptions[@queryKey]).toBeDefined()
|
2015-12-08 08:52:46 +08:00
|
|
|
unsub()
|
feat(mail-rules): Per-account mail rules filter incoming, existing mail
Summary:
Originally, this was going to be a totally independent package, but
I wasn't able to isolate the functionality and get it tied in to
the delta-stream consumption. Here's how it currently works:
- The preferences package has a new tab which allows you to edit
mail filters. Filters are saved in a new core store, and a new
stock component (ScenarioEditor) renders the editor. The editor
takes a set of templates that define a value space, and outputs
a valid set of values.
- A new MailFilterProcessor takes messages and creates tasks to
apply the actions from the MailFiltersStore.
- The worker-sync package now uses the MailFilterProcessor to
apply filters /before/ it calls didPassivelyReceiveNewModels,
so filtrs are applied before any notifications are created.
- A new task, ReprocessMailFiltersTask allows you to run filters
on all of your existing mail. It leverages the existing TaskQueue
architecture to: a) resume where it left off if you quit midway,
b) be queryable (for status) from all windows and c) cancelable.
The TaskQueue is a bit strange because it runs performLocal and
performRemote very differently, and I had to use `performRemote`.
(todo refactor soon.)
This diff also changes the EditableList a bit to behave like a
controlled component and render focused / unfocused states.
Test Plan: Run tests, only for actual filter processing atm.
Reviewers: juan, evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D2379
2015-12-23 15:19:32 +08:00
|
|
|
expect(QuerySubscriptionPool._subscriptions[@queryKey]).toBeDefined()
|
|
|
|
advanceClock()
|
|
|
|
expect(QuerySubscriptionPool._subscriptions[@queryKey]).toBeUndefined()
|