Mailspring/packages/client-app/spec/tasks/event-rsvp-task-spec.coffee

96 lines
2.9 KiB
CoffeeScript
Raw Normal View History

_ = require 'underscore'
feat(transactions): Explicit (and faster) database transactions Summary: Until now, we've been hiding transactions beneath the surface. When you call persistModel, you're implicitly creating a transaction. You could explicitly create them with `atomically`..., but there were several critical problems that are fixed in this diff: - Calling persistModel / unpersistModel within a transaction could cause the DatabaseStore to trigger. This could result in other parts of the app making queries /during/ the transaction, potentially before the COMMIT occurred and saved the changes. The new, explicit inTransaction syntax holds all changes until after COMMIT and then triggers. - Calling atomically and then calling persistModel inside that resulted in us having to check whether a transaction was present and was gross. - Many parts of the code ran extensive logic inside a promise chained within `atomically`: BAD: ``` DatabaseStore.atomically => DatabaseStore.persistModel(draft) => GoMakeANetworkRequestThatReturnsAPromise ``` OVERWHELMINGLY BETTER: ``` DatabaseStore.inTransaction (t) => t.persistModel(draft) .then => GoMakeANetworkRequestThatReturnsAPromise ``` Having explicit transactions also puts us on equal footing with Sequelize and other ORMs. Note that you /have/ to call DatabaseStore.inTransaction (t) =>. There is no other way to access the methods that let you alter the database. :-) Other changes: - This diff removes Message.labels and the Message-Labels table. We weren't using Message-level labels anywhere, and the table could grow very large. - This diff changes the page size during initial sync from 250 => 200 in an effort to make transactions a bit faster. Test Plan: Run tests! Reviewers: juan, evan Reviewed By: juan, evan Differential Revision: https://phab.nylas.com/D2353
2015-12-18 03:46:05 +08:00
{NylasAPI,
NylasAPIRequest,
feat(transactions): Explicit (and faster) database transactions Summary: Until now, we've been hiding transactions beneath the surface. When you call persistModel, you're implicitly creating a transaction. You could explicitly create them with `atomically`..., but there were several critical problems that are fixed in this diff: - Calling persistModel / unpersistModel within a transaction could cause the DatabaseStore to trigger. This could result in other parts of the app making queries /during/ the transaction, potentially before the COMMIT occurred and saved the changes. The new, explicit inTransaction syntax holds all changes until after COMMIT and then triggers. - Calling atomically and then calling persistModel inside that resulted in us having to check whether a transaction was present and was gross. - Many parts of the code ran extensive logic inside a promise chained within `atomically`: BAD: ``` DatabaseStore.atomically => DatabaseStore.persistModel(draft) => GoMakeANetworkRequestThatReturnsAPromise ``` OVERWHELMINGLY BETTER: ``` DatabaseStore.inTransaction (t) => t.persistModel(draft) .then => GoMakeANetworkRequestThatReturnsAPromise ``` Having explicit transactions also puts us on equal footing with Sequelize and other ORMs. Note that you /have/ to call DatabaseStore.inTransaction (t) =>. There is no other way to access the methods that let you alter the database. :-) Other changes: - This diff removes Message.labels and the Message-Labels table. We weren't using Message-level labels anywhere, and the table could grow very large. - This diff changes the page size during initial sync from 250 => 200 in an effort to make transactions a bit faster. Test Plan: Run tests! Reviewers: juan, evan Reviewed By: juan, evan Differential Revision: https://phab.nylas.com/D2353
2015-12-18 03:46:05 +08:00
Event,
Actions,
APIError,
EventRSVPTask,
DatabaseStore,
DatabaseWriter,
feat(transactions): Explicit (and faster) database transactions Summary: Until now, we've been hiding transactions beneath the surface. When you call persistModel, you're implicitly creating a transaction. You could explicitly create them with `atomically`..., but there were several critical problems that are fixed in this diff: - Calling persistModel / unpersistModel within a transaction could cause the DatabaseStore to trigger. This could result in other parts of the app making queries /during/ the transaction, potentially before the COMMIT occurred and saved the changes. The new, explicit inTransaction syntax holds all changes until after COMMIT and then triggers. - Calling atomically and then calling persistModel inside that resulted in us having to check whether a transaction was present and was gross. - Many parts of the code ran extensive logic inside a promise chained within `atomically`: BAD: ``` DatabaseStore.atomically => DatabaseStore.persistModel(draft) => GoMakeANetworkRequestThatReturnsAPromise ``` OVERWHELMINGLY BETTER: ``` DatabaseStore.inTransaction (t) => t.persistModel(draft) .then => GoMakeANetworkRequestThatReturnsAPromise ``` Having explicit transactions also puts us on equal footing with Sequelize and other ORMs. Note that you /have/ to call DatabaseStore.inTransaction (t) =>. There is no other way to access the methods that let you alter the database. :-) Other changes: - This diff removes Message.labels and the Message-Labels table. We weren't using Message-level labels anywhere, and the table could grow very large. - This diff changes the page size during initial sync from 250 => 200 in an effort to make transactions a bit faster. Test Plan: Run tests! Reviewers: juan, evan Reviewed By: juan, evan Differential Revision: https://phab.nylas.com/D2353
2015-12-18 03:46:05 +08:00
AccountStore} = require 'nylas-exports'
fix(spec): add support for async specs and disable misbehaving ones More spec fixes replace process.nextTick with setTimeout(fn, 0) for specs Also added an unspy in the afterEach Temporarily disable specs fix(spec): start fixing specs Summary: This is the WIP fix to our spec runner. Several tests have been completely commented out that will require substantially more work to fix. These have been added to our sprint backlog. Other tests have been fixed to update to new APIs or to deal with genuine bugs that were introduced without our knowing! The most common non-trivial change relates to observing the `NylasAPI` and `NylasAPIRequest`. We used to observe the arguments to `makeRequest`. Unfortunately `NylasAPIRequest.run` is argumentless. Instead you can do: `NylasAPIRequest.prototype.run.mostRecentCall.object.options` to get the `options` passed into the object. the `.object` property grabs the context of the spy when it was last called. Fixing these tests uncovered several concerning issues with our test runner. I spent a while tracking down why our participant-text-field-spec was failling every so often. I chose that spec because it was the first spec to likely fail, thereby requiring looking at the least number of preceding files. I tried binary searching, turning on and off, several files beforehand only to realize that the failure rate was not determined by a particular preceding test, but rather the existing and quantity of preceding tests, AND the number of console.log statements I had. There is some processor-dependent race condition going on that needs further investigation. I also discovered an issue with the file-download-spec. We were getting errors about it accessing a file, which was very suspicious given the code stubs out all fs access. This was caused due to a spec that called an async function outside ot a `waitsForPromise` block or a `waitsFor` block. The test completed, the spies were cleaned up, but the downstream async chain was still running. By the time the async chain finished the runner was already working on the next spec and the spies had been restored (causing the real fs access to run). Juan had an idea to kill the specs once one fails to prevent cascading failures. I'll implement this in the next diff update Test Plan: npm test Reviewers: juan, halla, jackie Differential Revision: https://phab.nylas.com/D3501 Disable other specs Disable more broken specs All specs turned off till passing state Use async-safe versions of spec functions Add async test spec Remove unused package code Remove canary spec
2016-12-13 04:12:20 +08:00
xdescribe "EventRSVPTask", ->
beforeEach ->
spyOn(DatabaseStore, 'find').andCallFake => Promise.resolve(@event)
spyOn(DatabaseWriter.prototype, 'persistModel').andCallFake -> Promise.resolve()
@myName = "Ben Tester"
@myEmail = "tester@nylas.com"
@event = new Event
id: '12233AEDF5'
accountId: TEST_ACCOUNT_ID
title: 'Meeting with Ben Bitdiddle'
description: ''
location: ''
when:
end_time: 1408123800
start_time: 1408120200
start: 1408120200
end: 1408123800
participants: [
{"name": "Ben Bitdiddle",
"email": "ben@bitdiddle.com",
"status": "yes"},
{"name": @myName,
"email": @myEmail,
"status": 'noreply'}
]
@task = new EventRSVPTask(@event, @myEmail, "no")
describe "performLocal", ->
it "should mark our status as no", ->
@task.performLocal()
advanceClock()
expect(@event.participants[1].status).toBe "no"
it "should trigger an action to persist the change", ->
@task.performLocal()
advanceClock()
expect(DatabaseWriter.prototype.persistModel).toHaveBeenCalled()
describe "performRemote", ->
it "should make the POST request to the message endpoint", ->
spyOn(NylasAPIRequest.prototype, 'run').andCallFake => new Promise (resolve,reject) ->
@task.performRemote()
fix(spec): add support for async specs and disable misbehaving ones More spec fixes replace process.nextTick with setTimeout(fn, 0) for specs Also added an unspy in the afterEach Temporarily disable specs fix(spec): start fixing specs Summary: This is the WIP fix to our spec runner. Several tests have been completely commented out that will require substantially more work to fix. These have been added to our sprint backlog. Other tests have been fixed to update to new APIs or to deal with genuine bugs that were introduced without our knowing! The most common non-trivial change relates to observing the `NylasAPI` and `NylasAPIRequest`. We used to observe the arguments to `makeRequest`. Unfortunately `NylasAPIRequest.run` is argumentless. Instead you can do: `NylasAPIRequest.prototype.run.mostRecentCall.object.options` to get the `options` passed into the object. the `.object` property grabs the context of the spy when it was last called. Fixing these tests uncovered several concerning issues with our test runner. I spent a while tracking down why our participant-text-field-spec was failling every so often. I chose that spec because it was the first spec to likely fail, thereby requiring looking at the least number of preceding files. I tried binary searching, turning on and off, several files beforehand only to realize that the failure rate was not determined by a particular preceding test, but rather the existing and quantity of preceding tests, AND the number of console.log statements I had. There is some processor-dependent race condition going on that needs further investigation. I also discovered an issue with the file-download-spec. We were getting errors about it accessing a file, which was very suspicious given the code stubs out all fs access. This was caused due to a spec that called an async function outside ot a `waitsForPromise` block or a `waitsFor` block. The test completed, the spies were cleaned up, but the downstream async chain was still running. By the time the async chain finished the runner was already working on the next spec and the spies had been restored (causing the real fs access to run). Juan had an idea to kill the specs once one fails to prevent cascading failures. I'll implement this in the next diff update Test Plan: npm test Reviewers: juan, halla, jackie Differential Revision: https://phab.nylas.com/D3501 Disable other specs Disable more broken specs All specs turned off till passing state Use async-safe versions of spec functions Add async test spec Remove unused package code Remove canary spec
2016-12-13 04:12:20 +08:00
options = NylasAPIRequest.prototype.run.mostRecentCall.object.options
expect(options.path).toBe("/send-rsvp")
expect(options.method).toBe('POST')
expect(options.accountId).toBe(@event.accountId)
expect(options.body.event_id).toBe(@event.id)
expect(options.body.status).toBe("no")
describe "when the remote API request fails", ->
beforeEach ->
spyOn(NylasAPIRequest.prototype, 'run').andCallFake -> Promise.reject(new APIError(body: '', statusCode: 400))
it "should not be marked with the status", ->
@event = new Event
id: '12233AEDF5'
title: 'Meeting with Ben Bitdiddle'
description: ''
location: ''
when:
end_time: 1408123800
start_time: 1408120200
start: 1408120200
end: 1408123800
participants: [
{"name": "Ben Bitdiddle",
"email": "ben@bitdiddle.com",
"status": "yes"},
{"name": @myName,
"email": @myEmail,
"status": 'noreply'}
]
@task = new EventRSVPTask(@event, @myEmail, "no")
@task.performLocal()
@task.performRemote()
advanceClock()
expect(@event.participants[1].status).toBe "noreply"
it "should trigger an action to persist the change", ->
@task.performLocal()
@task.performRemote()
advanceClock()
expect(DatabaseWriter.prototype.persistModel).toHaveBeenCalled()