Summary:
Originally, this was going to be a totally independent package, but
I wasn't able to isolate the functionality and get it tied in to
the delta-stream consumption. Here's how it currently works:
- The preferences package has a new tab which allows you to edit
mail filters. Filters are saved in a new core store, and a new
stock component (ScenarioEditor) renders the editor. The editor
takes a set of templates that define a value space, and outputs
a valid set of values.
- A new MailFilterProcessor takes messages and creates tasks to
apply the actions from the MailFiltersStore.
- The worker-sync package now uses the MailFilterProcessor to
apply filters /before/ it calls didPassivelyReceiveNewModels,
so filtrs are applied before any notifications are created.
- A new task, ReprocessMailFiltersTask allows you to run filters
on all of your existing mail. It leverages the existing TaskQueue
architecture to: a) resume where it left off if you quit midway,
b) be queryable (for status) from all windows and c) cancelable.
The TaskQueue is a bit strange because it runs performLocal and
performRemote very differently, and I had to use `performRemote`.
(todo refactor soon.)
This diff also changes the EditableList a bit to behave like a
controlled component and render focused / unfocused states.
Test Plan: Run tests, only for actual filter processing atm.
Reviewers: juan, evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D2379
Summary:
This provides a new API for `ContenteditableExtension`s. Instead of
manually manipulating the raw DOM and `Selection` objects, there's a new
`Editor` interface that encapsulates it and provides helper methods.
You can now do:
editor.select(someNode).createLink("foo").collapseToEnd()
Now raw methods like `execCommand` ONLY show up in the `Editor` interface
as well as most of the raw `Selection` APIs.
There are also more integration tests :)
Another major goal was cleaning up the contenteditable file itself. To
that end:
1. The DOMNormalizer got pulled out into its own extension
1. The TabManager is now its own extension
1. Url wrangling got moved into the FloatingToolbar control
1. There is now the concept of a `ContenteditableService`, which are
tightly-couple blocks of code separated out into logical units. These are
dependent on the core state, innerState, and props and are not full
extensions.
1. `MouseService` now handles all the click event logic
1. `ClipboardService` was modified to the new service architecture
Test Plan: script/grunt run-integration-tests
Reviewers: drew, juan, bengotow
Reviewed By: juan, bengotow
Differential Revision: https://phab.nylas.com/D2367
Summary:
This is a WIP for the new send draft logic.
I'll add tests then update the diff
Test Plan: todo
Reviewers: bengotow, juan
Reviewed By: juan
Differential Revision: https://phab.nylas.com/D2341
Summary:
- The main purpose of this is to be able to properly register the editor for the markdown plugin (and any other plugins to come)
- Refactors ComposerView and Contenteditable ->
- Replaces Contenteditable with an InjectedComponent for a new region role:
"Composer:Editor"
- Creates a new component called ComposerEditor, which is the one that is
being registered by default as "Composer:Editor"
- I used this class to try to standardize the props that should be
passed to any would be editor Component:
- Renamed a bunch of the props which (I think) had a bit of
confusing names
- Added a bunch of docs for these in the source file, although
I feel like those docs should live elsewhere, like in the
ComponentRegion docs.
- In the process, I ended up pulling some stuff out of ComposerView and
some stuff out of the Contenteditable, namely:
- The scrolling logic to ensure that the composer is visible while
typing was moved outside of the Contenteditable -- this feels more
like the ComposerEditor's responsibility, especially since the
Contenteditable is meant to be used in other contexts as well.
- The ComposerExtensions state; it feels less awkward for me if this
is inside the ComposerEditor because 1) ComposerView does less
things, 2) these are actually just being passed to the
Contenteditable, 3) I feel like other plugins shouldn't need to
mess around with ComposerExtensions, so we shouldn't pass them to the
editor. If you register an editor different from our default one,
any other ComposerExtension callbacks will be disabled, which
I feel is expected behavior.
- I think there is still some more refactoring to be done, and I left some TODOS
here and there, but I think this diff is already big enough and its a minimal
set of changes to get the markdown editor working in a not so duck
tapish way.
- New props for InjectedComponent:
- `requiredMethods`: allows you to define a collection of methods that
should be implemented by any Component that registers for your
desired region.
- It will throw an error if these are not implemented
- It will automatically pass calls made on the InjectedComponent to these methods
down to the instance of the actual registered component
- Would love some comments on this approach and impl
- `fallback`: allows you to define a default component to use if none were
registered through the ComponentRegistry
- Misc:
- Added a new test case for the QuotedHTMLTransformer
- Tests:
- They were minimally updated so that they don't break, but a big TODO
is to properly refactor them. I plan to do that in an upcoming
diff.
Test Plan: - Unit tests
Reviewers: bengotow, evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D2372
Summary:
Until now, we've been hiding transactions beneath the surface. When you call persistModel, you're implicitly creating a transaction.
You could explicitly create them with `atomically`..., but there were several critical problems that are fixed in this diff:
- Calling persistModel / unpersistModel within a transaction could cause the DatabaseStore to trigger. This could result in other parts of the app making queries /during/
the transaction, potentially before the COMMIT occurred and saved the changes. The new, explicit inTransaction syntax holds all changes until after COMMIT and then triggers.
- Calling atomically and then calling persistModel inside that resulted in us having to check whether a transaction was present and was gross.
- Many parts of the code ran extensive logic inside a promise chained within `atomically`:
BAD:
```
DatabaseStore.atomically =>
DatabaseStore.persistModel(draft) =>
GoMakeANetworkRequestThatReturnsAPromise
```
OVERWHELMINGLY BETTER:
```
DatabaseStore.inTransaction (t) =>
t.persistModel(draft)
.then =>
GoMakeANetworkRequestThatReturnsAPromise
```
Having explicit transactions also puts us on equal footing with Sequelize and other ORMs. Note that you /have/ to call DatabaseStore.inTransaction (t) =>. There is no other way to access the methods that let you alter the database. :-)
Other changes:
- This diff removes Message.labels and the Message-Labels table. We weren't using Message-level labels anywhere, and the table could grow very large.
- This diff changes the page size during initial sync from 250 => 200 in an effort to make transactions a bit faster.
Test Plan: Run tests!
Reviewers: juan, evan
Reviewed By: juan, evan
Differential Revision: https://phab.nylas.com/D2353
- When prop specified to not allow empty selection it should also
prevent it from being cleared when pressing Esc while focusing the list
- Adds a default value to the edit item input
- Updates specs
- Updates styles
Linux returns ['asked', 'acidify', 'Assad'] for the string "asdfk"
which seems normal to me. Why do OS X and/or Windows return [] for
that string? That seems weird, so I just broke the spec to run different
specs on different platforms.
Summary:
Adds the new Account preferences page. This consists of two major React components,
PreferencesAccountList and PreferencesAccountDetails, both of which use EditableList.
I added a bunch of fixes and updated the API for EditableList, plus a bit of
refactoring for PreferencesAccount component, and a bunch of CSS so its a big diff.
The detailed changelog:
Updates to EditableList:
- Fix bug updating selection state when arrows pressed to move selection
- Add new props:
- allowEmptySelection to allow the list to have no selection
- createInputProps to pass aditional props to the createInput
- Add scroll region for list items
- Update styles and refactor render methods
Other Updates:
- Updates Account model to hold aliases and a label
- Adds getter for label to default to email
- Update accountswitcher to display label, update styles and spec
- Refactor PreferencesAccounts component:
- Splits it into smaller components,
- Removes unused code
- Splits preferences styelsheets into smaller separate stylesheet for
account page. Adds some updates and fixes (scroll-region padding)
- Update AccountStore to be able to perform updates on an account.
- Adds new Action to update account, and an action to remove account to
be consistent with Action usage
- Adds components for Account list and Aliases list using EditableList
Test Plan: - All specs pass, but need to write new tests!
Reviewers: bengotow, evan
Reviewed By: bengotow
Differential Revision: https://phab.nylas.com/D2332
Summary:
- You can now pass `--config-dir-path=/some/custom/path` to `./N1.sh`
- `main.coffee` cleaned up a bit. A lot of unused params from legacy Atom
stuff were still being used
- Integration specs now set the config dir before booting.
- New spec to check for the autoupdater in the app and make sure it's
pointing at the right place.
Test Plan: script/grunt run-integration-tests
Reviewers: juan, bengotow
Reviewed By: bengotow
Differential Revision: https://phab.nylas.com/D2331
Summary:
A fix to reserialize JSON blob data properly for complex object types.
We should investigate overriding all of JSON.parse and JSON.stringify.
This coming in a future diff.
Also we were using old Electron APIs that were throwing backend errors
Test Plan: todo
Reviewers: juan, bengotow
Reviewed By: bengotow
Differential Revision: https://phab.nylas.com/D2326
Summary:
Add concept of "final" to Query, clean up internals
Tiny bug fixes
RxJs Observables!
WIP
Test Plan: Run tests
Reviewers: evan, juan
Reviewed By: juan
Differential Revision: https://phab.nylas.com/D2319
Summary:
Related to #320, #494, #515, #553
Ignore newlines and returns in HTML, they can be inside tags
Allow all attributes so that paste from excel looks nice
Never let someone paste a `contenteditable` attribute
Update specs
Test Plan: Run new specs
Reviewers: juan, evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D2309
- Show downloading state for inline attachments
- Ensure that the UI updates /after/ the download has completed
- Don't delete finished downloads (previously we were forgetting that a file was downloaded and checking again and again)
Fixes#462
Summary:
- Generic list component wich supports adding, editing and removing
string-like items or components
- Needs some css love
Test Plan: - Unit tests.
Reviewers: evan, bengotow
Reviewed By: bengotow
Differential Revision: https://phab.nylas.com/D2322
Summary:
- Works like Gmail does
- Adds specs
Test Plan: - Unit tests
Reviewers: evan, bengotow
Reviewed By: bengotow
Differential Revision: https://phab.nylas.com/D2301
comment
Adding test harness
Using key strokes in main window test
Tests work now
Clean up argument variables
Rename list manager and get rid of old spec-helper methods
Extract out time overrides from spec-helper
Spectron test for contenteditable
fix spec exit codes and boot mode
fix(spec): cleanup N1.sh and make specs fail with exit code 1
Revert tests and get it working in window
Move to spec_integration and add window load tester
Specs pass. Console logs still in
Remove console logs
Extract N1 Launcher ready method
Make integrated unit test runner
feat(tests): adding integration tests
Summary:
The /spectron folder got moved to /spec_integration
There are now unit tests (the old ones) run via the renamed
`script/grunt run-unit-tests`
There are now integration tests run via the command `script/grunt
run-integration-tests`.
There are two types of integration tests:
1. Tests that operate on the whole app via Selenium/Chromedriver. These
tests have access to Spectron APIs but do NOT have access to any JS object
running inside the application. See the `app-boot-spec.es6` for an example
of these tests. This is tricky because we want to test the Main window,
but Spectron may latch onto any other of our loading windows. Code in
`integration-helper` give us an API that finds and loads the main window
so we can test it
2. Tests that run in the unit test suite that need Spectron to perform
integration-like behavior. These are the contentedtiable specs. The
Spectron server is accessed from the app and can be used to trigger
actions on the running app, from the app. These tests use the
windowed-test runner so Spectron can identify whether the tests have
completed, passed, or failed. Unfortunately Spectron can't access the logs
, nor the exit code of the test script thereby forcing us to parse the
HTML DOM. (Note this is still a WIP)
I also revamped the `N1.sh` file when getting the launch arguments to work
properly. It's much cleaner. We didn't need most of the data.
Test Plan: new tests
Reviewers: juan, bengotow
Differential Revision: https://phab.nylas.com/D2289
Fix composer specs
Tests can properly detect when Spectron is in the environment
Report plain text output in specs
fixing contenteditable specs
Testing slow keymaps on contenteditable specs
Move to DOm mutation
Spell as `subtree` not `subTree`
Summary: This uses DOM mutation observers instead of `onInput`
Test Plan: manual and new integration tests
Reviewers: bengotow, juan
Differential Revision: https://phab.nylas.com/D2291
feat(contenteditable): add bold, underline, etc keymaps
Moving button extensions out of toolbar
Extracted floating toolbar buttons
Convert ContenteditableExtension to new spec
Update packages to use new callback signature
Fix specs
Summary:
- Rename DraftStoreExtension to ComposerExtension
- Rename MessageStoreExtension to MessageViewExtension
- Rename ContenteditablePlugin to ContenteditableExtension
- Update Contenteditable to use new naming convention
- Adds support for extension handlers as props
- Add ExtensionRegistry to register extensions:
- ContenteditableExtensions will not be registered through the
ExtensionRegistry. They are meant for internal use, or if anyone wants
to use our Contenteditable component directly in their plugins.
- Adds specs
- Refactors internal_packages and src to use new names and new ExtensionRegistry api
- Adds deprecation util function and deprecation notices for old api methods:
- DraftStore.{registerExtension, unregisterExtension}
- MessageStore.{registerExtension, unregisterExtension}
- DraftStoreExtension.{onMouseUp, onTabDown}
- MessageStoreExtension
- Adds and updates docs
Test Plan: - Unit tests
Reviewers: bengotow, evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D2293
Summary:
reduce scope of changes
more changes
Test Plan: Run 1 new test
Reviewers: juan
Reviewed By: juan
Differential Revision: https://phab.nylas.com/D2290
Electron 0.35.1 includes the tray fixes we contributed last week but also includes API restructuring and improvements. Most importantly, modules from electron are now imported via `require('electron')`
Summary:
- Refactors account-sidebar internal package:
- Separates into smaller react components
- Makes DisclosureTriangle its own independent component
- Adds data to AccountSidebarStore to allow removal or addition of items for a
specific section of the sidebar
- Adds button and input and css styles to create categories
- Adds context menu to destroy a category
- Adds new method to CategoryStore to get the icon name for the categories of
the current account
- Removes some unused code
Test Plan: Manual
Reviewers: evan, bengotow
Reviewed By: bengotow
Differential Revision: https://phab.nylas.com/D2283
Summary:
This diff replaces the UnreadCountStore with a better approach that is able to track unread counts for all folders/labels without continuous (and cripplingly slow) SELECT COUNT(*) queries.
When models are written to the database, we currently don't send out notifications with the "previous" state of those objects in the database. This makes it hard to determine how to update counters. (In the future, we may need to do this for live queries). Unfortunately, getting the "previous" state is going to be very hard, because multiple windows write to the database and the "previous" state we have might be outdated. We'd almost have to run a "SELECT" right before every "REPLACE INTO".
I created an API that allows you to register observers around persistModel and unpersistModel. With this API, you can run queries before and after the database changes are made and pluck just the "before" state you're interested in.
The `ThreadCountsStore` uses this API to determine the impact of persisting a set of threads on the unread counts of different labels. Before the threads are saved, it says "how much do these thread IDs contribute to unread counts currently?". After the write is complete it looks at the models and computes the difference between the old count impact and the new count impact, and updates the counters.
I decided not to attach the unread count to the Label objects themselves because 1) they update frequently and 2) most things observing the DatabaseStore for categories do not care about counts, so they would be updating unnecessarily.
The AccountSidebar now listens to the ThreadCountsStore as well as the CategoryStore, and there's a new preference in the General tab for turning off the counts.
Test Plan: Tests are a work in progress, want to get feedback first!
Reviewers: juan, evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D2232
Summary:
- Fixes T5819 issues
- Adds ContenteditbalePlugin mechanism to allow extension of Contenteditable
functionality, and completely removes lifecycleCallbacks from Contenteditable
- Refactors list functionality outside of Contenteditable and into a plugin
- Updates ComposerView to apply DraftStoreExtensions through a ContentEditablePlugin
- Moves spell checking logic outside of Contenteditable into the spellcheck package
Fixes T5824 (atom.assert)
Fixes T5951 (shift-tabbing) bullets
Test Plan: - Unit tests and manual
Reviewers: evan, bengotow
Reviewed By: bengotow
Maniphest Tasks: T5951, T5824, T5819
Differential Revision: https://phab.nylas.com/D2261
Summary:
- Include ES6 files in spec-suite
- Fix template store specs
- Refactors TemplateStore a little bit to adjust to specs
- Convert coffe .cjsx files to ES6 .jsx files
- Fix TemplateDraftStoreExtension functions
- Update ComposerTemplates example README
Test Plan: - Plugin unit tests
Reviewers: bengotow, evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D2250
This fixes#393.
The name "Olivia" was being caught in our parser designed to shorten "Mike Kaylor via LinkedIn" to "Mike Kaylor". We now check that "via" is it's own distinct word in the phrase.
Summary:
Can select all, deselect-all, read, unread, starred, unstarred.
Yes, it's not REALLY select "all", but it uses the items in the current
`retainedRange`. This is actually similar to what gmail does (only selects
on the first page of a 100).
Test Plan: new test
Reviewers: juan, bengotow
Reviewed By: bengotow
Differential Revision: https://phab.nylas.com/D2241
Summary:
Refactor keymaps to wrap components with a <KeymapHandlers /> component.
This more Reactful way of declaring keyback handlers prevents us from
needing to subscribe to `atom.commands`
Test Plan: new tests
Reviewers: bengotow, juan
Reviewed By: bengotow
Differential Revision: https://phab.nylas.com/D2226
Summary:
We send database `trigger()` events through the ActionBrige to all windows of the app. This means that during initial sync, we're serializing, IPCing and unserializing thousands of models a minute x "N" windows.
This diff converts the payload of the trigger method into an actual class that implements a custom toJSON. It converts the impacted `objects` into a string, and doesn't deserialize them until it's asked.
Bottom line: this means that in many scenarios, we can avoid creating Contact models, etc. in composer windows only to broadcast them and then gc them.
Test Plan: No new tests yet, but this should definitel be tested. #willfix.
Reviewers: juan, evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D2236
Summary:
ignores composition event commands until they're done. We then simply
update the new state after that happens.
Some additional refactoring:
- The <Contenteditable /> prop is 'value' instead of 'html' to make it
look more like a standard React controlled input
- Removed `filters` prop and `footerElements` prop from Contenteditable.
These could easily be moved into the composer (where they belong).
- Moved contenteditable and a few of its helper classes into their own
folder.
- Moved `UndoManager` up out of the `flux` folder into `src`. Currently
undo/redo is only in the composer when all contenteditables should have
the basic funcionality. Will refactor this later.
- Fix tests
Test Plan: manual
Reviewers: bengotow
Reviewed By: bengotow
Differential Revision: https://phab.nylas.com/D2211
Summary:
Adding signature support in preferences
Extracting out DraftStore extensions from the Contenteditable component
Moved Contenteditable to the nylas component kit
Build react remote window selection synchronization.
Test Plan: todo
Reviewers: bengotow
Reviewed By: bengotow
Differential Revision: https://phab.nylas.com/D2204
Summary:
The Promise chain we were creating was never cleared and created a memory
leak. We instead use a `PromiseQueue` to cleanup finished promises.
Also added several more tests and verified that the memory leak is gone
with the Chrome profiler
Test Plan: new tests
Reviewers: bengotow
Reviewed By: bengotow
Differential Revision: https://phab.nylas.com/D2184
Summary:
The EventStore was really doing nothing, except caching hundreds of MB of
event data unnecessarily in each and every window :(
Test Plan: manual
Reviewers: bengotow
Reviewed By: bengotow
Differential Revision: https://phab.nylas.com/D2187
Summary:
This diff centralizes logic for creating common tasks for things like moving to trash, archive, etc. TaskFactory exposes a set of convenience methods and hides the whole "and also remove the current label" business from the user.
This diff also formally separates the concept of "moving to trash" and "archiving" so that "remove" isn't used in an unclear way.
I also refactored where selection is managed. Previously you'd fire some action like archiveSelection and it'd clear the selection, but if you selected some items and used another method to archive a few, they were still selected. The selection is now bound to the ModelView as intended, so if items are removed from the modelView, they are removed from it's attached selection. This means that it shouldn't /technically/ be possible to have selected items which are not in view.
I haven't refactored the tests yet. They are likely broken...
Fix next/prev logic
Test Plan: Run tests
Reviewers: evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D2157
Summary:
Fixes T4291
If I made a final edit to a pre-existing draft and sent, we'd queue a
`SyncbackDraftTask` before a `SendDraftTask`. This is important because
since we have a valid draft `server_id`, the `SendDraftTask` will send by
server_id, not by POSTing the whole body.
If the `SyncbackDraftTask` fails, then we had a very serious issue whereby
the `SendDraftTask` would keep on sending. Unfortunately the server never
got the latest changes and sent the wrong version of the draft. This
incorrect version would show up later when the `/send` endpoint returned
the message that got actually sent.
The solution was to make any queued `SendDraftTask` fail if a dependent
`SyncbackDraftTask` failed.
This meant we needed to make the requirements for `shouldWaitForTask`
stricter, and block if tasks failed.
Unfortunatley there was no infrastructure in place to do this.
The first change was to change `shouldWaitForTask` to `isDependentTask`.
If we're going to fail when a dependent task fails, I wanted the method
name to reflect this.
Now, if a dependent task fails, we recursively check the dependency tree
(and check for cycles) and `dequeue` anything that needed that to succeed.
I chose `dequeue` as the default action because it seemed as though all
current uses of `shouldWaitForTask` really should bail if their
dependencies fail. It's possible you don't want your task dequeued in this
dependency case. You can return the special `Task.DO_NOT_DEQUEUE_ME`
constant from the `onDependentTaskError` method.
When a task gets dequeued because of the reason above, the
`onDependentTaskError` callback gets fired. This gives tasks like the
`SendDraftTask` a chance to notify the user that it bailed. Not all tasks
need to notify.
The next big issue was a better way to determine if a task truely errored
to the point that we need to dequeue dependencies. In the Developer Status
area we were showing tasks that had errored as "Green" because we caught
the error and resolved with `Task.Status.Finished`. This used to be fine
since nothing life-or-death cared if a task errored or not. Now that it
might cause abortions down the line, we needed a more robust method then
this.
For one I changed `Task.Status.Finished` to a variety of finish types
including `Task.Status.Success`. The way you "error" out is to `throw` or
`Promise.reject` an `Error` object from the `performRemote` method. This
allows us to propagate API errors up, and acts as a safety net that can
catch any malformed code or unexpected responses.
The developer bar now shows a much richer set of statuses instead of a
binary one, which was REALLY helpful in debugging this. We also record
when a Task got dequeued because of the conditions introduced here.
Once all this was working we still had an issue of sending old drafts.
If after a `SyncbackDraftTask` failed, now we'd block the send and notify
the users as such. However, if we tried to send again, there was a
separate issue whereby we wouldn't queue another `SyncbackDraftTask` to
update the server with the latest information. Since our changes were
persisted to the DB, we thought we had no changes, and therefore didn't
need to queue a `SyncbackDraftTask`.
The fix to this is to always force the creation of a `SyncbackDraftTask`
before send regardless of the state of the `DraftStoreProxy`.
Test Plan: new tests. Lots of manual testing
Reviewers: bengotow
Reviewed By: bengotow
Subscribers: mg
Maniphest Tasks: T4291
Differential Revision: https://phab.nylas.com/D2156
Summary:
Also added tests to catch the case
Fixes T4290
Test Plan: new tests
Reviewers: bengotow
Reviewed By: bengotow
Maniphest Tasks: T4290
Differential Revision: https://phab.nylas.com/D2153
An absolute ContactStore spec was causing the listener leak by
re-initializing the store and not cleaning it up.
Intermittent theme manager failing spec might be caused due to timing of
the theme activation
Summary:
Contact ranking is now tested.
There was a bug whereby the RankingsJSONCache would only update in the
workerwindow. This regressed when Contact ranking moved exclusively into
the main window and separate composer windws requested rankings via ipc
Test Plan: New tests
Reviewers: drew, bengotow
Reviewed By: bengotow
Differential Revision: https://phab.nylas.com/D2134
Summary: Fixes Sentry 3319 and 3303
Test Plan: Run three new tests
Reviewers: dillon, evan
Reviewed By: dillon, evan
Differential Revision: https://phab.nylas.com/D2118
Summary:
fixes T4080
set the maximum default viewport size to 1440x900, the screen resolution for a 15 inch macbook pro.
if the monitor is either wider or taller than the default, then cap the dimension and center it.
Test Plan: added tests
Reviewers: evan, bengotow
Reviewed By: evan, bengotow
Maniphest Tasks: T4080
Differential Revision: https://phab.nylas.com/D2115
Summary:
This:
1. Moves spec-nylas into spec
1. Gets rid of old & irrelevant specs
1. Moves the `vendor` folder (jasmine libs) into the `spec` folder
1. Moves the `exports` folder to `src/global` and updates all references
I pretty extensively made sure the client still works and that all of the
tests pass. The changes should have no effect.
Test Plan: All tests pass!
Reviewers: bengotow, dillon
Differential Revision: https://phab.nylas.com/D2098
Summary: Simplify the default window size, restore window size when the main window is loaded, fix serialization of packages in beforeunload.
Test Plan: Run tests
Reviewers: evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D2061
Summary:
Move sync workers and Edgehill token checks to work window
Move the task queue and database setup to the work window
Move ContactStore background refresh to work window
Store the task queue in the database
WIP
The TaskQueue now puts tasks in the database instead of in a file, which also means it can be observed
Move all delta sync and initial sync to a package, make NylasSyncStore which exposes read-only sync state
DraftStore no longer reads task status. Once you set the "sending" bit on a draft, it never gets unset. But that's fine actually.
If your package lists windowTypes, you *only* get loaded in those windowTypes. If you specify no windowTypes, you get loaded in the root window.
This means that onboarding, worker-ui, worker-sync, etc. no longer get loaded into the main window
ActivitySidebar has a special little store that observes the task queue since it's no longer in the window
Move "toggle component regions" / "toggle react remote" to the Developer menu
Move sync worker specs, update draft store specs to not rely on TaskQueue at all
Test Plan: Run existing tests, all pass
Reviewers: dillon, evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D1936
Summary:
d1c44dcb54
Also lock config across processes to prevent the user from being logged out when the main process reads config before it's finished writing. This is what is causing the login window to appear.
Test Plan: Rapidly tap between the two display modes. Note that it no longer reverts to the wrong one intermittently.
Reviewers: evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D1931
Summary:
This diff replaces the Namespace object with the Account object, and changes all references to namespace_id => account_id, etc. The endpoints are now `/threads` instead of `/n/<id>/threads`.
This diff also adds preliminary support for multiple accounts. When you log in, we now log you in to all the attached accounts on edgehill server. From the preferences panel, you can auth with / unlink additional accounts. Shockingly, this all seems to pretty much work.
When replying to a thread, you cannot switch from addresses. However, when creating a new message in a popout composer, you can change the from address and the SaveDraftTask will delete/re-root the draft on the new account.
Search bar doesn't need to do full refresh on clear if it never committed
Allow drafts to be switched to a different account when not in reply to an existing thread
Fix edge case where ChangeMailTask throws exception if no models are modified during performLocal
Show many dots for many accounts in long polling status bar
add/remove accounts from prefs
Spec fixes!
Test Plan: Run tests, none broken!
Reviewers: evan, dillon
Reviewed By: evan, dillon
Differential Revision: https://phab.nylas.com/D1928
Summary:
There are now two objects, Folders & Labels. These inherit from `Category`
(that's what Eben said they were using on the backend).
There are two separate tasks.
1. MoveToFolderTask
2. ApplyLabelsTask
It turns out that the semantics between the two are quite different.
The reverse operation for moving to a folder is a bit tricky.
As of 7-8-15, the Tasks are pretty much complete. I need to write tests
for them still and do some manual testing in the client.
Test Plan: Writing specs
Reviewers: bengotow
Reviewed By: bengotow
Differential Revision: https://phab.nylas.com/D1724
Summary:
This diff does a couple things:
- Undo redo with a new undo/redo store that maintains it's own queue of undo/redo tasks. This queue is separate from the TaskQueue because not all tasks should be considered for undo history! Right now just the AddRemoveTagsTask is undoable.
- NylasAPI.makeRequest now returns a promise which resolves with the result or rejects with an error. For things that still need them, there's still `success` and `error` callbacks. I also added `started:(req) ->` which allows you to get the underlying request.
- Aborting a NylasAPI request now makes it call it's error callback / promise reject.
- You can now run code after perform local has completed using this syntax:
```
task = new AddRemoveTagsTask(focused, ['archive'], ['inbox'])
task.waitForPerformLocal().then ->
Actions.setFocus(collection: 'thread', item: nextFocus)
Actions.setCursorPosition(collection: 'thread', item: nextKeyboard)
Actions.queueTask(task)
```
- In specs, you can now use `advanceClock` to get through a Promise.then/catch/finally. Turns out it was using something low level and not using setTimeout(0).
- The TaskQueue uses promises better and defers a lot of the complexity around queueState for performLocal/performRemote to a task subclass called APITask. APITask implements "perform" and breaks it into "performLocal" and "performRemote".
- All tasks either resolve or reject. They're always removed from the queue, unless they resolve with Task.Status.Retry, which means they internally did a .catch (err) => Promise.resolve(Task.Status.Retry) and they want to be run again later.
- API tasks retry until they succeed or receive a NylasAPI.PermanentErrorCode (400,404,500), in which case they revert and finish.
- The AddRemoveTags Task can now take more than one thread! This is super cool because you can undo/redo a bulk action and also because we'll probably have a bulk tag modification API endpoint soon.
Getting undo / redo working revealed that the thread versioning system we built isn't working because the server was incrementing things by more than 1 at a time. Now we count the number of unresolved "optimistic" changes we've made to a given model, and only accept the server's version of it once the number of optimistic changes is back at zero.
Known Issues:
- AddRemoveTagsTasks aren't dependent on each other, so if you (undo/redo x lots) and then come back online, all the tasks try to add / remove all the tags at the same time. To fix this we can either allow the tasks to be merged together into a minimal set or make them block on each other.
- When Offline, you still get errors in the console for GET requests. Need to catch these and display an offline status bar.
- The metadata tasks haven't been updated yet to the new API. Wanted to get it reviewed first!
Test Plan: All the tests still pass!
Reviewers: evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D1694
Summary:
Silence buffered process spec
Clean up error reporter and spec bootup
fix errors in draft store spec
package manager spec and theme spec fixes
Fix memory leak in draft store
Test Plan: mmmmmm tests. Run all those green passing tests :)
Reviewers: bengotow
Reviewed By: bengotow
Differential Revision: https://phab.nylas.com/D1628
Summary:
atom-window `sendMessage` was not the same as `browserWindow.webContents.send`. WTF.
Save current namespace to config.cson so that it is never null when window opens
Don't re-create thread view on namespace change unless the namespace has changed
Tests for NamespaceStore state
Push worker immediately in workerForNamcespace to avoid creating two connections per namespace
Allow \n to be put into sreaming buffer, but only one
Clear streaming buffer when we're reconnecting to avoid processing same deltas twice (because of 400msec throttle)
Make `onProcessBuffer` more elegant—No functional changes
Test Plan: Run tests!
Reviewers: evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D1551
Summary:
fix(task-queue): Repair the findTask function
Add "ship logs" and "open logs" to the developer menu
Patches for Chromium 42
Test Plan: Run tests!
Reviewers: evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D1547
Summary:
- We now make verbose log files continuously as you use the app
- We ship the logs to LogStash via S3 when an exception occurs
- We log the DatabaseStore, ActionBridge and Analytics packages
- We are now on the latest version of Electron 0.26.0
- We are now on Chrome 42 and io.js 1.4.3
- We should be setup to use ASAR soon.
Update atom.sh to reflect that we're now electron
oniguruma was unnecessary
correctly find log files that haven't been shipped yet
Fix a small issue with nodeIsVisible after upgrade to Chrome 42
Delete old logs, better logging from database store, don't ship empty logs
Test Plan: Run existing tests
Reviewers: evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D1531
Summary:
Fixes: T1334
remove final InboxApp references
move out all underscore-plus methods
Mass find and replace of underscore-plus
sed -i '' -- 's/underscore-plus/underscore/g' **/*.coffee
sed -i '' -- 's/underscore-plus/underscore/g' **/*.cjsx
Test Plan: edgehill --test
Reviewers: bengotow
Reviewed By: bengotow
Differential Revision: https://phab.nylas.com/D1534
Summary:
Rename ActivityBar => DeveloperBar
Expose sync workers and make them observable
New activity sidebar that replaces momentary notifications
Updated specs
Test Plan: Run new specs!
Reviewers: evan
Reviewed By: evan
Maniphest Tasks: T1131
Differential Revision: https://phab.nylas.com/D1521
Summary:
This is an effort to make the logic around the process of sending a draft
cleaner and easier to understand.
Fixes T1253
Test Plan: edgehill --test
Reviewers: bengotow
Reviewed By: bengotow
Maniphest Tasks: T1253
Differential Revision: https://phab.nylas.com/D1518
Summary:
This diff gives the ComponentRegistry a cleaner, smaller API. Instead of querying by name, location or role,
it's now just location and role, and you can register components for one or more location and one or more
roles without assigning the entries in the registry separate names.
When you register with the ComponentRegistry, the syntax is also cleaner and uses the component's displayName
instead of requiring you to provide a name. You also provide the actual component when unregistering, ensuring
that you can't unregister someone else's component.
InjectedComponent and InjectedComponentSet now wrap their children in UnsafeComponent, which prevents
render/component lifecycle problems from propogating.
Existing components have been updated:
1. maxWidth / minWidth are now containerStyles.maxWidth/minWidth
2. displayName is now required to use the CR.
3. containerRequired = false can be provided to exempt a component from being wrapped in an UnsafeComponent.
This is useful because it's slightly faster and keeps DOM flat.
This diff also makes the "Show Component Regions" more awesome. It displays column regions, since they now
use the InjectedComponentSet, and also shows for InjectedComponent as well as InjectedComponentSet.
Change ComponentRegistry syntax, lots more work on safely wrapping items. See description.
Fix for inline flexbox scenarios (message actions)
Allow ~/.inbox/packages to be symlinked to a github repo
Test Plan: Run tests!
Reviewers: evan
Reviewed By: evan
Differential Revision: https://review.inboxapp.com/D1457
Summary:
#### WIP! ####
This is making it all work with the association endpoint, putting
together the Salesforce Sidebar interfaces, and getting the nested
creators/updaters working.
I still need to do a bunch of UI work and actually debug the whole
workflow still
---
rename SalesforceContactStore to SalesforceSearchStore
rename SalesforceContact to SalesforceSearchResult
salesforce sidebar changes
salesforce association picker
object form store fixes
figuring out newFormItem instigators
Make SalesforceObjectFormStore declarative off SalesforceObjectStore
Make action basd handlers for SalesforceObjectStore
sidebar store create and associate
salesforce sidebar and picker fixes
association works and displays on sidebar
salesforce object form fixes
object form fixes
fix salesforce updating
Test Plan: TODO
Reviewers: bengotow
Reviewed By: bengotow
Differential Revision: https://review.inboxapp.com/D1440
Summary: fix(query): .count() queries are apparently coming back as strings. Never let this happen
Test Plan: Run 1 new test
Reviewers: evan
Reviewed By: evan
Subscribers: ktalwar
Differential Revision: https://review.inboxapp.com/D1441
Summary:
tests on the schemas
build input elements
form builder pulls data
grouping by row
salesforce object store
salesforce api logic
successfully pulling salesforce objects into db
object store saving to db
refactoring tokenizing text field
full documented tokenizing text field with specs
linking in object picker component
converting generated form to a controlled input
form change handlers for controlled inputs
Salesforce object creator store
new way of opening windows
removed atom.state.mode
create new salesforce object creator in new window
form creator loading in popup with generated form
generated form renders select and multiselcet and textarea
add checkbox
creating related objects
windnows know when others close
remove debugger statements
form submission
converting data for salesforce posting
hot window loading
new hot window registration
hot loading windows
actions for listening to salesforce objects created
generated form errors
error handling for salesforce object creator
rename saleforce object form store
display errors to form
submitting state passed through
properly posts objects to Salesforce
change name to salesforce object form
add deep clone
use formItemEach
styling for Salesforce form creator
salesforce required fields come back and populate form
generated form loads related objects into fields
remove console logs and fix sales schema adapter test
fix task queue and formbuilder specs
fix action bridge spec
fix tokenizing text field spec
fix draft store and tokenizing proptypes
fix linter issues
fix tokenizing text field bug
rename to refresh window props
remove console.log
Test Plan: edgehill --test
Reviewers: bengotow
Reviewed By: bengotow
Differential Revision: https://review.inboxapp.com/D1425
Summary:
Atom provides a ContextualMenuManager which auto-generates contextual menus based on CSS rules, which fire commands. This is conceptually cool since it allows for extendable contextual menus, but A) it uses commands and B) it doesn't play nicely with React components.
This diff removes this manager object completely. Instead, React components can create contextual menus for themselves and dispatch actions / make local changes as they see fit.
If we want to allow people to extend our contextual menus, we can come up with a new solution that is not based on them having a `cson` file referencing a CSS Selector string that they don't own, and using strings for everything.
Test Plan: Run tests
Reviewers: evan
Reviewed By: evan
Differential Revision: https://review.inboxapp.com/D1362
Summary:
This diff uses the new ?expanded=true threads request to fetch threads and the messages inside them at the same time. The messages from this endpoint don't contain bodies. Message bodies have been moved to a new "secondary attribute" type, which can be optionally requested when making queries. This allows us to 1) quickly fetch messages without worrying about MBs of JSON, 2) update messages without updating their bodies, and 3) avoid calls to /messages?thread_id=123. The new message store fetches just the items it wants to display in expanded mode, and we'll show snippets for the rest.
Fix up forwarded message
Approach: Thread.messageMetadata
join approach WIP
join approach complete
"" || null = null. OMG.
Make spinner a bit smarter, use code delays and not css delays
Search suggestion store should only show first 10 matches
Msg collapsing, refactored msg store that will fetch individual messages that are marked as expanded, set loaded = true when it's all done
Test Plan: Tests coming soon. The query refactoring here broke a lot of tests...
Reviewers: evan
Reviewed By: evan
Differential Revision: https://review.inboxapp.com/D1345
Summary:
Message list can be narrower
Account sidebar is narrower
Never open new windows on single click
Blue send button
Clean up cruft from draft deletion
Render composer empty, setProps when draft populated
Use new `pristine` attribute to discard un-changed new drafts
_addToProxy needs deep equals to prevent "save to = [], cc = []"
Mark as read on click, not afterwards
Allow toolbar / sheet items to style based on the workspace mode
specs covering draft unloading / behavior of cleanup
Always, always reset mode to spec after each test
New tests for destroy draft functionality
Test Plan: Run a handful of new tests
Reviewers: evan
Reviewed By: evan
Differential Revision: https://review.inboxapp.com/D1335
Summary:
Why does message-list have default participants? No other packages do
Component registry warns if mixin component name not found
Clear the component registry between tests and wipe React elements inserted into DOM
Everything should have a displayName, even you ComposerView
Stub all ComponentRegistry dependencies, always
Test Plan: Run all the tests at the same time
Reviewers: evan
Reviewed By: evan
Differential Revision: https://review.inboxapp.com/D1201
Summary:
- Remove unnecessary log statements
- Use dbPath = null in specs, results in in-memory database
- Only surface promise errors that are Javascript syntax, refernece range or type problems
- Stub out NamespaceStore.current() always
Test Plan: Run tests, see less garbage!
Reviewers: evan
Reviewed By: evan
Differential Revision: https://review.inboxapp.com/D1171
Summary:
This diff contains a few major changes:
1. Scribe is no longer used for the text editor. It's just a plain contenteditable region. The toolbar items (bold, italic, underline) still work. Scribe was causing React inconcistency issues in the following scenario:
- View thread with draft, edit draft
- Move to another thread
- Move back to thread with draft
- Move to another thread. Notice that one or more messages from thread with draft are still there.
There may be a way to fix this, but I tried for hours and there are Github Issues open on it's repository asking for React compatibility, so it may be fixed soon. For now contenteditable is working great.
2. Action.saveDraft() is no longer debounced in the DraftStore. Instead, firing that action causes the save to happen immediately, and the DraftStoreProxy has a new "DraftChangeSet" class which is responsbile for batching saves as the user interacts with the ComposerView. There are a couple big wins here:
- In the future, we may want to be able to call Action.saveDraft() in other situations and it should behave like a normal action. We may also want to expose the DraftStoreProxy as an easy way of backing interactive draft UI.
- Previously, when you added a contact to To/CC/BCC, this happened:
<input> -> Action.saveDraft -> (delay!!) -> Database -> DraftStore -> DraftStoreProxy -> View Updates
Increasing the delay to something reasonable like 200msec meant there was 200msec of lag before you saw the new view state.
To fix this, I created a new class called DraftChangeSet which is responsible for accumulating changes as they're made and firing Action.saveDraft. "Adding" a change to the change set also causes the Draft provided by the DraftStoreProxy to change immediately (the changes are a temporary layer on top of the database object). This means no delay while changes are being applied. There's a better explanation in the source!
This diff includes a few minor fixes as well:
1. Draft.state is gone—use Message.object = draft instead
2. String model attributes should never be null
3. Pre-send checks that can cancel draft send
4. Put the entire curl history and task queue into feedback reports
5. Cache localIds for extra speed
6. Move us up to latest React
Test Plan: No new tests - once we lock down this new design I'll write tests for the DraftChangeSet
Reviewers: evan
Reviewed By: evan
Differential Revision: https://review.inboxapp.com/D1125
