Summary:
fixes T3564
the problem was that the user couldn't tell that the folder & label lists contained more folders & labels than was shown. so i added a scrollbar to make it clearer.
Test Plan: tested manually. all tests still green.
Reviewers: evan, bengotow
Reviewed By: bengotow
Maniphest Tasks: T3564
Differential Revision: https://phab.nylas.com/D2029
Summary: Fixed a bug bug with the quoted text clearing the bodies on replies
Test Plan: all the tests
Reviewers: dillon, bengotow
Reviewed By: bengotow
Differential Revision: https://phab.nylas.com/D1981
Summary: I wasn't sure how much the min-width should be. I cross-checked with Gmail and found that they set a pretty generous min-width. I felt 700px seemed comfortable.
Test Plan: Manually tested. All other tests remain green.
Reviewers: bengotow
Maniphest Tasks: T3442
Differential Revision: https://phab.nylas.com/D1954
Summary:
This diff replaces the Namespace object with the Account object, and changes all references to namespace_id => account_id, etc. The endpoints are now `/threads` instead of `/n/<id>/threads`.
This diff also adds preliminary support for multiple accounts. When you log in, we now log you in to all the attached accounts on edgehill server. From the preferences panel, you can auth with / unlink additional accounts. Shockingly, this all seems to pretty much work.
When replying to a thread, you cannot switch from addresses. However, when creating a new message in a popout composer, you can change the from address and the SaveDraftTask will delete/re-root the draft on the new account.
Search bar doesn't need to do full refresh on clear if it never committed
Allow drafts to be switched to a different account when not in reply to an existing thread
Fix edge case where ChangeMailTask throws exception if no models are modified during performLocal
Show many dots for many accounts in long polling status bar
add/remove accounts from prefs
Spec fixes!
Test Plan: Run tests, none broken!
Reviewers: evan, dillon
Reviewed By: evan, dillon
Differential Revision: https://phab.nylas.com/D1928
Previously, we were adding 160px of padding to the entire To field. Now the buttons in the top right are floating inside the container and only impact the first line of participants.
I also stripped out a lot of zIndex rules on the participant fields, subject, body that I think were only necessary because "once you've started adding zindexes you need them everywhere".
Also changed the hover state of the buttons to be consistent.
Summary:
fix(undo-redo): UndoRedoComponent does not take props
fix(category-picker):
- Use Actions.queueTask like the rest of the app so UndoRedoStore can see it. Can change this in the future but it's currently the only place in the app we directly queue tasks.
- Stop subscribing to the FocusedContentStore / FocusedCategoryStore (which are not used in setState?) since we receive threads as props
- Rename categoryDatum to item because it's not a category. (Was super confused that categories were becoming JSON in `_extendCategoryWithDisplayData`) Give item a category property so that tasks can specify items and not IDs (allows for better descriptions like "Moved one thread to Archive"
Add simple shouldComponentUpdate to retina-img
Test Plan: Run tests
Reviewers: evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D1832
Summary:
The TokenizingTextField has several new optional props, including onEdit, which enables
editing of the tokens and tokenIsInvalid, which allows you to make tokens red, while still
accepting them as tokens.
When you go to send a message with invalid recipients it won't let you until you remove/
edit them.
Hotloading
Edit chips, keymappings not through command registry, 7 new tests for editing chips
Test Plan: Run 7 new tests
Reviewers: evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D1825
Summary:
The popover class now will adjust itself until it fits within the window
frame. You don't see the intermediate state in the double render.
Test Plan: edgehill --test
Reviewers: bengotow
Reviewed By: bengotow
Differential Revision: https://phab.nylas.com/D1795
Summary:
The new, styled folder and label picker!
Some highlights:
- Folder picker has custom icons and a divider
- Label picker has checkboxes with off, checked, and intermediate state
- Extracted LabelColorizer out of mail-label
- Search will bold the results it found
- Fixes to Tooltip to prevent it displaying at invalid moments
- Keyboard UX improvements to Menu
Test Plan: coming soon
Reviewers: bengotow
Reviewed By: bengotow
Differential Revision: https://phab.nylas.com/D1790
Summary:
Drag threads to the folders / labels in the sidebar
WIP
Drag and drop is styled!
Test Plan: Tests WIP
Reviewers: evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D1785
- Message reply dropdown uses new images. Fixes T2355
- New hover actions which are darker. Fixes T2358
- New reply icon in the message footer. Fixes T2359
- Toolbar buttons are the correct height. Fixes T2360
- Thread list selection state changes mail label style
- Removed dead assets
Summary:
This diff does a couple things:
- Undo redo with a new undo/redo store that maintains it's own queue of undo/redo tasks. This queue is separate from the TaskQueue because not all tasks should be considered for undo history! Right now just the AddRemoveTagsTask is undoable.
- NylasAPI.makeRequest now returns a promise which resolves with the result or rejects with an error. For things that still need them, there's still `success` and `error` callbacks. I also added `started:(req) ->` which allows you to get the underlying request.
- Aborting a NylasAPI request now makes it call it's error callback / promise reject.
- You can now run code after perform local has completed using this syntax:
```
task = new AddRemoveTagsTask(focused, ['archive'], ['inbox'])
task.waitForPerformLocal().then ->
Actions.setFocus(collection: 'thread', item: nextFocus)
Actions.setCursorPosition(collection: 'thread', item: nextKeyboard)
Actions.queueTask(task)
```
- In specs, you can now use `advanceClock` to get through a Promise.then/catch/finally. Turns out it was using something low level and not using setTimeout(0).
- The TaskQueue uses promises better and defers a lot of the complexity around queueState for performLocal/performRemote to a task subclass called APITask. APITask implements "perform" and breaks it into "performLocal" and "performRemote".
- All tasks either resolve or reject. They're always removed from the queue, unless they resolve with Task.Status.Retry, which means they internally did a .catch (err) => Promise.resolve(Task.Status.Retry) and they want to be run again later.
- API tasks retry until they succeed or receive a NylasAPI.PermanentErrorCode (400,404,500), in which case they revert and finish.
- The AddRemoveTags Task can now take more than one thread! This is super cool because you can undo/redo a bulk action and also because we'll probably have a bulk tag modification API endpoint soon.
Getting undo / redo working revealed that the thread versioning system we built isn't working because the server was incrementing things by more than 1 at a time. Now we count the number of unresolved "optimistic" changes we've made to a given model, and only accept the server's version of it once the number of optimistic changes is back at zero.
Known Issues:
- AddRemoveTagsTasks aren't dependent on each other, so if you (undo/redo x lots) and then come back online, all the tasks try to add / remove all the tags at the same time. To fix this we can either allow the tasks to be merged together into a minimal set or make them block on each other.
- When Offline, you still get errors in the console for GET requests. Need to catch these and display an offline status bar.
- The metadata tasks haven't been updated yet to the new API. Wanted to get it reviewed first!
Test Plan: All the tests still pass!
Reviewers: evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D1694
Summary:
If an email is to a group, the reply button should have `To` set the original email sender and `Cc` the group Fixes Phab ticket 2142. Previously, the click on the reply button was not captured unless the click occured on the reply or reply all icon. Changed the span to a div with no padding that captures all clicks
Test Plan: tested manually, unit tests
Reviewers: bengotow
Reviewed By: bengotow
Subscribers: evan
Maniphest Tasks: T2142
Differential Revision: https://phab.nylas.com/D1696
Summary:
Fixes T1905 - Gost line in recipients field
Fixes T1877 - Collapsed dates should not show time
Test Plan: edgehill --test
Reviewers: bengotow
Reviewed By: bengotow
Maniphest Tasks: T1877, T1905
Differential Revision: https://phab.nylas.com/D1671
Summary:
Fixes T1990
Change the ScrollRegion component so that you can optionally provide a getScrollbar prop that resolves to a ScrollRegion.Scrollbar component. This allows you to easily put the Scrollbar outside of the ScrollRegion if necessary.
Test Plan: Run tests
Reviewers: evan
Reviewed By: evan
Maniphest Tasks: T1990
Differential Revision: https://phab.nylas.com/D1665
Summary:
Initial message list collapsing
messages can be expanded explicitly
styling message items
composer UI and collapsing
expanding and collapsing headers
style new reply area
adding in message controls
Add message actions dropdown
Test Plan: edgehill --test
Reviewers: bengotow
Reviewed By: bengotow
Differential Revision: https://phab.nylas.com/D1664
Summary:
Allow Database models to create indexes, but don't autocreate bad ones
fix minor bug in error-reporter
Fix index on message list to make thread list lookups use proper index
Developer bar ignores state changes unless it's open
DatabaseView now asks for metadata for a set of items rather than calling a function for every item. Promise.props was cute but we really needed to make a single database query for all message metadata.
New "in" matcher so you can say `thread_id IN (1,2,3)`
Add .scroll-region-content-inner which is larger than the viewport by 1 page size, and uses transform(0,0,0) trick
ScrollRegion exposes `onScrollEnd` so listTabular, et al don't need to re-implement it with more timers. Also removing requestAnimationFrame which was causing us to request scrollTop when it was not ready, and caching the values of...
...clientHeight/scrollHeight while scrolling is in-flight
Updating rendered content 10 rows at a time (RangeChunkSize) was a bad idea. Instead, add every row in a render: pass as it comes in (less work all the time vs more work intermittently). Also remove bad requestAnimationFrame, and prevent calls to...
...updateRangeState from triggering additional calls to updateRangeState by removing `componentDidUpdate => updateRangeState `
Turning off hover (pointer-events:none) is now standard in ScrollRegion
Loading text in the scroll tooltip, instead of random date shown
Handle query parse errors by catching error and throwing a better more explanatory error
Replace "quick action" retina images with background images to make React render easier
Replace hasTagId with a faster implementation which doesn't call functions and doesn't build a temporary array
Print query durations when printing to console instead of only in metadata
Remove headers from support from ListTabular, we'll never use it
Making columns part of state was a good idea but changing the array causes the entire ListTabular to re-render. To avoid this, be smarter about updating columns. This logic could potentially go in `componentDidReceiveProps` too.
Fix specs and add 6 more for new database store functionality
Test Plan: Run 6 new specs. More in the works?
Reviewers: evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D1651
Summary: We now show the inspirational quotes only when in list mode and viewing a tag. When you're viewing search results, or when you're in three-pane mode, you now see a more generic empty state.
Test Plan: No tests yet, may want to see if this refactor sticks when we start adding more empty states
Reviewers: evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D1642
Summary:
Fixes T1868
The hidden sizing window was not getting whitespace properly and the width
was different because of different paddings
Test Plan: edgehill --test
Reviewers: bengotow
Reviewed By: bengotow
Maniphest Tasks: T1868
Differential Revision: https://phab.nylas.com/D1623
Summary: Adds hover actions to threads in the thread list, uses overflow:hidden to improve thread list render times
Test Plan: Run tests
Reviewers: evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D1621
Summary:
Fix bug in apm_wrapper
Refactor model selection so that it's easier to understand the logic for split vs list mode
Test Plan: Run new specs (WIP)
Reviewers: evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D1619
Summary:
When two or more buttons are grouped together, cut the padding off one interior edge so they're spaced more appropriately
Remove source list graphics for active states we aren't using
Starred in the sidebar
Small fix to the feature that keeps the selected item visible as you scroll
Test Plan: No new tests yet
Reviewers: evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D1607
Summary:
ScrollRegion with support for tooltips shown as you scroll, custom tooltips for thread list and message list.
fix(specs): all other scrollbars hidden to prevent incompatibility
fix scrollbar sizing when used in conjunction with resizableregion
Test Plan: Need to write tests and docs for ScrollRegion - no tests yet
Reviewers: evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D1597
Summary: Add docs for new RetinaImg modes
Test Plan: Not much to test, except that it looks good!
Reviewers: evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D1595
Summary:
atom-window `sendMessage` was not the same as `browserWindow.webContents.send`. WTF.
Save current namespace to config.cson so that it is never null when window opens
Don't re-create thread view on namespace change unless the namespace has changed
Tests for NamespaceStore state
Push worker immediately in workerForNamcespace to avoid creating two connections per namespace
Allow \n to be put into sreaming buffer, but only one
Clear streaming buffer when we're reconnecting to avoid processing same deltas twice (because of 400msec throttle)
Make `onProcessBuffer` more elegant—No functional changes
Test Plan: Run tests!
Reviewers: evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D1551
Summary: Resolves T1241
Test Plan: No tests to run - all CSS!
Reviewers: evan
Reviewed By: evan
Maniphest Tasks: T1241
Differential Revision: https://review.inboxapp.com/D1510
Summary:
Focused Content Store should notify observers when focused items change, not just when they're reassigned
Popovers should have a `direction` and optional event onOpened
Menu divider documentation was wrong, menus should support checked items by default
Pressing escape in a popover's input should dismiss the popover
Other changes
Remove specs that make no sense anymore
Small tweak to report build breaking. Shouldn't happen often ;)
Test Plan: Run tests, which will now phone home if they break
Reviewers: evan
Reviewed By: evan
Differential Revision: https://review.inboxapp.com/D1493
Summary:
Loads the current user to pre-populate the Salesforce field in the
creators
add tabindex to tokenizing text fields
Test Plan: edgehill --test
Reviewers: bengotow
Reviewed By: bengotow
Differential Revision: https://review.inboxapp.com/D1468
Summary:
This diff gives the ComponentRegistry a cleaner, smaller API. Instead of querying by name, location or role,
it's now just location and role, and you can register components for one or more location and one or more
roles without assigning the entries in the registry separate names.
When you register with the ComponentRegistry, the syntax is also cleaner and uses the component's displayName
instead of requiring you to provide a name. You also provide the actual component when unregistering, ensuring
that you can't unregister someone else's component.
InjectedComponent and InjectedComponentSet now wrap their children in UnsafeComponent, which prevents
render/component lifecycle problems from propogating.
Existing components have been updated:
1. maxWidth / minWidth are now containerStyles.maxWidth/minWidth
2. displayName is now required to use the CR.
3. containerRequired = false can be provided to exempt a component from being wrapped in an UnsafeComponent.
This is useful because it's slightly faster and keeps DOM flat.
This diff also makes the "Show Component Regions" more awesome. It displays column regions, since they now
use the InjectedComponentSet, and also shows for InjectedComponent as well as InjectedComponentSet.
Change ComponentRegistry syntax, lots more work on safely wrapping items. See description.
Fix for inline flexbox scenarios (message actions)
Allow ~/.inbox/packages to be symlinked to a github repo
Test Plan: Run tests!
Reviewers: evan
Reviewed By: evan
Differential Revision: https://review.inboxapp.com/D1457
Summary: fix(query): .count() queries are apparently coming back as strings. Never let this happen
Test Plan: Run 1 new test
Reviewers: evan
Reviewed By: evan
Subscribers: ktalwar
Differential Revision: https://review.inboxapp.com/D1441
Summary:
tests on the schemas
build input elements
form builder pulls data
grouping by row
salesforce object store
salesforce api logic
successfully pulling salesforce objects into db
object store saving to db
refactoring tokenizing text field
full documented tokenizing text field with specs
linking in object picker component
converting generated form to a controlled input
form change handlers for controlled inputs
Salesforce object creator store
new way of opening windows
removed atom.state.mode
create new salesforce object creator in new window
form creator loading in popup with generated form
generated form renders select and multiselcet and textarea
add checkbox
creating related objects
windnows know when others close
remove debugger statements
form submission
converting data for salesforce posting
hot window loading
new hot window registration
hot loading windows
actions for listening to salesforce objects created
generated form errors
error handling for salesforce object creator
rename saleforce object form store
display errors to form
submitting state passed through
properly posts objects to Salesforce
change name to salesforce object form
add deep clone
use formItemEach
styling for Salesforce form creator
salesforce required fields come back and populate form
generated form loads related objects into fields
remove console logs and fix sales schema adapter test
fix task queue and formbuilder specs
fix action bridge spec
fix tokenizing text field spec
fix draft store and tokenizing proptypes
fix linter issues
fix tokenizing text field bug
rename to refresh window props
remove console.log
Test Plan: edgehill --test
Reviewers: bengotow
Reviewed By: bengotow
Differential Revision: https://review.inboxapp.com/D1425
Summary:
This is a small diff that isolates the pattern of "insert all the things with role=ThreadAction and pass them these props". The goal is to eventually make this wrapper do some analysis, performance checks, etc. Right now, it just has the advantage of making the parent components simpler and also adding a new inspector view where you can see the regions , their names and the props they take (thread:<Thread> or selection:<ModelListSelection>)
fix(menu): Re-importing different class with same name breaking dropdowns
make composer use flexbox for it's footer
fix alignment of the input in the participant text field. how did this break?
new action for hiding / showing component regions
Test Plan: Run tests
Reviewers: evan
Reviewed By: evan
Differential Revision: https://review.inboxapp.com/D1422
Summary:
fix(scrollbars): overflow-y, not overflow
fix(participants): Overflow not set correctly on participants
fix(thread-list): Don't show reply or fw icon for unsent drafts
Remove bad code for updating sidebar drafts
Mark as read in MessageStore so that receiving new messages while viewing a thread re-marks it as read
Don't show messages I send with the "Reply" icon
Test Plan: Run tests
Reviewers: evan
Reviewed By: evan
Differential Revision: https://review.inboxapp.com/D1418
Summary:
Remember to remove all the event listeners added to email frame
New files tab, queryable filename, not attribute
Rename ThreadSelectionBar to RootSelectionBar to go with RootCenterComponent, make it appear for draft selection and file selection as well
Initial file list and file list store, File Location
Remove unnecessary shouldComponentUpdate
Always track whether new requests have happened since ours to prevent out of order triggers
Always scroll to the current [focused/keyboard-cursor] in lists
So goodbye to the trash tag
Only scroll to current item if focus or keyboard has moved
Show message snippet in notification if no subject line
Make the RootSelectionBar pull items from Component Registry
New Archive button (prettier than the other one)
Refactor event additions to iframe so iframe can be used for file display also
Thread List is no longer the uber root package - drafts and files moved to separate packages
WorkspaceStore now allows packages to register sheets, "view" concept replaced with "root sheet" concept, "mode" may not be observed by all sheets, and is now called "preferred mode"
Don't animate transitions between two root sheets
Mode switch is only visible on root sheets that support multiple modes
Account sidebar now shows "Views" that have registered themselves: drafts and files for now
Model Selection Bar is now a component, just like ModelList. Meant to be in the toolbar above a Model List
Misc supporting changes
New files package which registers it's views and components
Rename files package to `file-list`
Move checkmark column down into model list
Don't throw exception if shift-down arrow and nothing selected
Takes a long time on login to fetch first page of threads, make pages smaller
Displaynames, spec fixes
Test Plan: Run tests
Reviewers: evan
Reviewed By: evan
Differential Revision: https://review.inboxapp.com/D1412
Summary:
This diff provides multi-selection in the thread list powered by a new ModelList component that implements selection on top of ListTabular (or soon another List component). It includes business logic for single selection, shift selection, command-click selection, etc.
This diff also improves the performance of DatabaseView by assessing whether updates are required based on specific database changes and skipping queries in many scenarios.
WIP
WIP
Move selection into modelView instead of store
WIP
Preparing to convert to ModelList mixin
Make ThreadStore => ThreadListStore
Break the DraftStore in two (new DraftListStore) to avoid keeping all drafts in all windows
Get rid of unread instance variable in favor of getter that falls through to isUnread()
Much smarter logic in DatabaseView to prevent needless queries (especially counts and full invalidation of retained range)
Squashed commit of the following:
commit 486516b540e659735675765ca8b20d8a107ee2a9
Author: Ben Gotow <bengotow@gmail.com>
Date: Tue Apr 7 17:30:23 2015 -0700
Invalidate the retained range debounced
commit 7ac80403f52d108696c555f79c4c687d969f0228
Author: Ben Gotow <bengotow@gmail.com>
Date: Tue Apr 7 17:30:16 2015 -0700
Wait until after the view updates to move focus
commit 88d66eb19a9710847ff98bea22045bb686f30cc6
Author: Ben Gotow <bengotow@gmail.com>
Date: Tue Apr 7 17:28:01 2015 -0700
Bail out early when loading data if a reload has been requested
commit a49bedc44687040f7c675ff298376917a0b5fdcb
Author: Ben Gotow <bengotow@gmail.com>
Date: Tue Apr 7 16:38:58 2015 -0700
Log query data when in a query is being logged
commit c64a9e02f9072fd30edb98c45be581d6ac00c48a
Author: Ben Gotow <bengotow@gmail.com>
Date: Tue Apr 7 16:38:45 2015 -0700
Mark thread and messages as read in parallel instead of in sequence
commit 4b227100a795e20257cda0d60b00cc75b0000b0f
Author: Ben Gotow <bengotow@gmail.com>
Date: Tue Apr 7 16:38:32 2015 -0700
Don't load tags with hardcoded IDs from the database, and load them in parallel instead of in sequence
commit aeb7f1d646786cfa1c247fe78ce5467da07c4446
Author: Ben Gotow <bengotow@gmail.com>
Date: Tue Apr 7 16:37:54 2015 -0700
Pass objects instead of ids to thread methods—since we always have the most current thread anyway, this makes things a bit faster
commit e70889d1d05ece81a081b8b3f27b62491429b6f9
Author: Ben Gotow <bengotow@gmail.com>
Date: Mon Apr 6 16:41:49 2015 -0700
[icon] Paper airplanes
Restyle account sidebar, optimize tag count queries a bit more
Fix initialization issue with webkit image mask
Can't compare dates with is/isnt
Assets for check boxes
Bug fixes
Wrap ModelList instead of providing props
Verbose mode for database view
Fix existing specs
Six new specs covering invalidateIfItemsInconsistent
Test Plan: Run 40+ new tests
Reviewers: evan
Reviewed By: evan
Differential Revision: https://review.inboxapp.com/D1410
