Summary:
The Promise chain we were creating was never cleared and created a memory
leak. We instead use a `PromiseQueue` to cleanup finished promises.
Also added several more tests and verified that the memory leak is gone
with the Chrome profiler
Test Plan: new tests
Reviewers: bengotow
Reviewed By: bengotow
Differential Revision: https://phab.nylas.com/D2184
Summary:
The EventStore was really doing nothing, except caching hundreds of MB of
event data unnecessarily in each and every window :(
Test Plan: manual
Reviewers: bengotow
Reviewed By: bengotow
Differential Revision: https://phab.nylas.com/D2187
Summary:
This diff centralizes logic for creating common tasks for things like moving to trash, archive, etc. TaskFactory exposes a set of convenience methods and hides the whole "and also remove the current label" business from the user.
This diff also formally separates the concept of "moving to trash" and "archiving" so that "remove" isn't used in an unclear way.
I also refactored where selection is managed. Previously you'd fire some action like archiveSelection and it'd clear the selection, but if you selected some items and used another method to archive a few, they were still selected. The selection is now bound to the ModelView as intended, so if items are removed from the modelView, they are removed from it's attached selection. This means that it shouldn't /technically/ be possible to have selected items which are not in view.
I haven't refactored the tests yet. They are likely broken...
Fix next/prev logic
Test Plan: Run tests
Reviewers: evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D2157
Summary:
Fixes T4291
If I made a final edit to a pre-existing draft and sent, we'd queue a
`SyncbackDraftTask` before a `SendDraftTask`. This is important because
since we have a valid draft `server_id`, the `SendDraftTask` will send by
server_id, not by POSTing the whole body.
If the `SyncbackDraftTask` fails, then we had a very serious issue whereby
the `SendDraftTask` would keep on sending. Unfortunately the server never
got the latest changes and sent the wrong version of the draft. This
incorrect version would show up later when the `/send` endpoint returned
the message that got actually sent.
The solution was to make any queued `SendDraftTask` fail if a dependent
`SyncbackDraftTask` failed.
This meant we needed to make the requirements for `shouldWaitForTask`
stricter, and block if tasks failed.
Unfortunatley there was no infrastructure in place to do this.
The first change was to change `shouldWaitForTask` to `isDependentTask`.
If we're going to fail when a dependent task fails, I wanted the method
name to reflect this.
Now, if a dependent task fails, we recursively check the dependency tree
(and check for cycles) and `dequeue` anything that needed that to succeed.
I chose `dequeue` as the default action because it seemed as though all
current uses of `shouldWaitForTask` really should bail if their
dependencies fail. It's possible you don't want your task dequeued in this
dependency case. You can return the special `Task.DO_NOT_DEQUEUE_ME`
constant from the `onDependentTaskError` method.
When a task gets dequeued because of the reason above, the
`onDependentTaskError` callback gets fired. This gives tasks like the
`SendDraftTask` a chance to notify the user that it bailed. Not all tasks
need to notify.
The next big issue was a better way to determine if a task truely errored
to the point that we need to dequeue dependencies. In the Developer Status
area we were showing tasks that had errored as "Green" because we caught
the error and resolved with `Task.Status.Finished`. This used to be fine
since nothing life-or-death cared if a task errored or not. Now that it
might cause abortions down the line, we needed a more robust method then
this.
For one I changed `Task.Status.Finished` to a variety of finish types
including `Task.Status.Success`. The way you "error" out is to `throw` or
`Promise.reject` an `Error` object from the `performRemote` method. This
allows us to propagate API errors up, and acts as a safety net that can
catch any malformed code or unexpected responses.
The developer bar now shows a much richer set of statuses instead of a
binary one, which was REALLY helpful in debugging this. We also record
when a Task got dequeued because of the conditions introduced here.
Once all this was working we still had an issue of sending old drafts.
If after a `SyncbackDraftTask` failed, now we'd block the send and notify
the users as such. However, if we tried to send again, there was a
separate issue whereby we wouldn't queue another `SyncbackDraftTask` to
update the server with the latest information. Since our changes were
persisted to the DB, we thought we had no changes, and therefore didn't
need to queue a `SyncbackDraftTask`.
The fix to this is to always force the creation of a `SyncbackDraftTask`
before send regardless of the state of the `DraftStoreProxy`.
Test Plan: new tests. Lots of manual testing
Reviewers: bengotow
Reviewed By: bengotow
Subscribers: mg
Maniphest Tasks: T4291
Differential Revision: https://phab.nylas.com/D2156
Summary:
Also added tests to catch the case
Fixes T4290
Test Plan: new tests
Reviewers: bengotow
Reviewed By: bengotow
Maniphest Tasks: T4290
Differential Revision: https://phab.nylas.com/D2153
An absolute ContactStore spec was causing the listener leak by
re-initializing the store and not cleaning it up.
Intermittent theme manager failing spec might be caused due to timing of
the theme activation
Summary:
Contact ranking is now tested.
There was a bug whereby the RankingsJSONCache would only update in the
workerwindow. This regressed when Contact ranking moved exclusively into
the main window and separate composer windws requested rankings via ipc
Test Plan: New tests
Reviewers: drew, bengotow
Reviewed By: bengotow
Differential Revision: https://phab.nylas.com/D2134
Summary: Fixes Sentry 3319 and 3303
Test Plan: Run three new tests
Reviewers: dillon, evan
Reviewed By: dillon, evan
Differential Revision: https://phab.nylas.com/D2118
Summary:
fixes T4080
set the maximum default viewport size to 1440x900, the screen resolution for a 15 inch macbook pro.
if the monitor is either wider or taller than the default, then cap the dimension and center it.
Test Plan: added tests
Reviewers: evan, bengotow
Reviewed By: evan, bengotow
Maniphest Tasks: T4080
Differential Revision: https://phab.nylas.com/D2115
Summary:
This:
1. Moves spec-nylas into spec
1. Gets rid of old & irrelevant specs
1. Moves the `vendor` folder (jasmine libs) into the `spec` folder
1. Moves the `exports` folder to `src/global` and updates all references
I pretty extensively made sure the client still works and that all of the
tests pass. The changes should have no effect.
Test Plan: All tests pass!
Reviewers: bengotow, dillon
Differential Revision: https://phab.nylas.com/D2098
Summary: Simplify the default window size, restore window size when the main window is loaded, fix serialization of packages in beforeunload.
Test Plan: Run tests
Reviewers: evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D2061
Summary:
Move sync workers and Edgehill token checks to work window
Move the task queue and database setup to the work window
Move ContactStore background refresh to work window
Store the task queue in the database
WIP
The TaskQueue now puts tasks in the database instead of in a file, which also means it can be observed
Move all delta sync and initial sync to a package, make NylasSyncStore which exposes read-only sync state
DraftStore no longer reads task status. Once you set the "sending" bit on a draft, it never gets unset. But that's fine actually.
If your package lists windowTypes, you *only* get loaded in those windowTypes. If you specify no windowTypes, you get loaded in the root window.
This means that onboarding, worker-ui, worker-sync, etc. no longer get loaded into the main window
ActivitySidebar has a special little store that observes the task queue since it's no longer in the window
Move "toggle component regions" / "toggle react remote" to the Developer menu
Move sync worker specs, update draft store specs to not rely on TaskQueue at all
Test Plan: Run existing tests, all pass
Reviewers: dillon, evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D1936
Summary:
d1c44dcb54
Also lock config across processes to prevent the user from being logged out when the main process reads config before it's finished writing. This is what is causing the login window to appear.
Test Plan: Rapidly tap between the two display modes. Note that it no longer reverts to the wrong one intermittently.
Reviewers: evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D1931
Summary:
This diff replaces the Namespace object with the Account object, and changes all references to namespace_id => account_id, etc. The endpoints are now `/threads` instead of `/n/<id>/threads`.
This diff also adds preliminary support for multiple accounts. When you log in, we now log you in to all the attached accounts on edgehill server. From the preferences panel, you can auth with / unlink additional accounts. Shockingly, this all seems to pretty much work.
When replying to a thread, you cannot switch from addresses. However, when creating a new message in a popout composer, you can change the from address and the SaveDraftTask will delete/re-root the draft on the new account.
Search bar doesn't need to do full refresh on clear if it never committed
Allow drafts to be switched to a different account when not in reply to an existing thread
Fix edge case where ChangeMailTask throws exception if no models are modified during performLocal
Show many dots for many accounts in long polling status bar
add/remove accounts from prefs
Spec fixes!
Test Plan: Run tests, none broken!
Reviewers: evan, dillon
Reviewed By: evan, dillon
Differential Revision: https://phab.nylas.com/D1928
Summary:
There are now two objects, Folders & Labels. These inherit from `Category`
(that's what Eben said they were using on the backend).
There are two separate tasks.
1. MoveToFolderTask
2. ApplyLabelsTask
It turns out that the semantics between the two are quite different.
The reverse operation for moving to a folder is a bit tricky.
As of 7-8-15, the Tasks are pretty much complete. I need to write tests
for them still and do some manual testing in the client.
Test Plan: Writing specs
Reviewers: bengotow
Reviewed By: bengotow
Differential Revision: https://phab.nylas.com/D1724
Summary:
This diff does a couple things:
- Undo redo with a new undo/redo store that maintains it's own queue of undo/redo tasks. This queue is separate from the TaskQueue because not all tasks should be considered for undo history! Right now just the AddRemoveTagsTask is undoable.
- NylasAPI.makeRequest now returns a promise which resolves with the result or rejects with an error. For things that still need them, there's still `success` and `error` callbacks. I also added `started:(req) ->` which allows you to get the underlying request.
- Aborting a NylasAPI request now makes it call it's error callback / promise reject.
- You can now run code after perform local has completed using this syntax:
```
task = new AddRemoveTagsTask(focused, ['archive'], ['inbox'])
task.waitForPerformLocal().then ->
Actions.setFocus(collection: 'thread', item: nextFocus)
Actions.setCursorPosition(collection: 'thread', item: nextKeyboard)
Actions.queueTask(task)
```
- In specs, you can now use `advanceClock` to get through a Promise.then/catch/finally. Turns out it was using something low level and not using setTimeout(0).
- The TaskQueue uses promises better and defers a lot of the complexity around queueState for performLocal/performRemote to a task subclass called APITask. APITask implements "perform" and breaks it into "performLocal" and "performRemote".
- All tasks either resolve or reject. They're always removed from the queue, unless they resolve with Task.Status.Retry, which means they internally did a .catch (err) => Promise.resolve(Task.Status.Retry) and they want to be run again later.
- API tasks retry until they succeed or receive a NylasAPI.PermanentErrorCode (400,404,500), in which case they revert and finish.
- The AddRemoveTags Task can now take more than one thread! This is super cool because you can undo/redo a bulk action and also because we'll probably have a bulk tag modification API endpoint soon.
Getting undo / redo working revealed that the thread versioning system we built isn't working because the server was incrementing things by more than 1 at a time. Now we count the number of unresolved "optimistic" changes we've made to a given model, and only accept the server's version of it once the number of optimistic changes is back at zero.
Known Issues:
- AddRemoveTagsTasks aren't dependent on each other, so if you (undo/redo x lots) and then come back online, all the tasks try to add / remove all the tags at the same time. To fix this we can either allow the tasks to be merged together into a minimal set or make them block on each other.
- When Offline, you still get errors in the console for GET requests. Need to catch these and display an offline status bar.
- The metadata tasks haven't been updated yet to the new API. Wanted to get it reviewed first!
Test Plan: All the tests still pass!
Reviewers: evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D1694
Summary:
Silence buffered process spec
Clean up error reporter and spec bootup
fix errors in draft store spec
package manager spec and theme spec fixes
Fix memory leak in draft store
Test Plan: mmmmmm tests. Run all those green passing tests :)
Reviewers: bengotow
Reviewed By: bengotow
Differential Revision: https://phab.nylas.com/D1628
Summary:
atom-window `sendMessage` was not the same as `browserWindow.webContents.send`. WTF.
Save current namespace to config.cson so that it is never null when window opens
Don't re-create thread view on namespace change unless the namespace has changed
Tests for NamespaceStore state
Push worker immediately in workerForNamcespace to avoid creating two connections per namespace
Allow \n to be put into sreaming buffer, but only one
Clear streaming buffer when we're reconnecting to avoid processing same deltas twice (because of 400msec throttle)
Make `onProcessBuffer` more elegant—No functional changes
Test Plan: Run tests!
Reviewers: evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D1551
Summary:
fix(task-queue): Repair the findTask function
Add "ship logs" and "open logs" to the developer menu
Patches for Chromium 42
Test Plan: Run tests!
Reviewers: evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D1547
Summary:
- We now make verbose log files continuously as you use the app
- We ship the logs to LogStash via S3 when an exception occurs
- We log the DatabaseStore, ActionBridge and Analytics packages
- We are now on the latest version of Electron 0.26.0
- We are now on Chrome 42 and io.js 1.4.3
- We should be setup to use ASAR soon.
Update atom.sh to reflect that we're now electron
oniguruma was unnecessary
correctly find log files that haven't been shipped yet
Fix a small issue with nodeIsVisible after upgrade to Chrome 42
Delete old logs, better logging from database store, don't ship empty logs
Test Plan: Run existing tests
Reviewers: evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D1531
Summary:
Fixes: T1334
remove final InboxApp references
move out all underscore-plus methods
Mass find and replace of underscore-plus
sed -i '' -- 's/underscore-plus/underscore/g' **/*.coffee
sed -i '' -- 's/underscore-plus/underscore/g' **/*.cjsx
Test Plan: edgehill --test
Reviewers: bengotow
Reviewed By: bengotow
Differential Revision: https://phab.nylas.com/D1534
Summary:
Rename ActivityBar => DeveloperBar
Expose sync workers and make them observable
New activity sidebar that replaces momentary notifications
Updated specs
Test Plan: Run new specs!
Reviewers: evan
Reviewed By: evan
Maniphest Tasks: T1131
Differential Revision: https://phab.nylas.com/D1521
Summary:
This is an effort to make the logic around the process of sending a draft
cleaner and easier to understand.
Fixes T1253
Test Plan: edgehill --test
Reviewers: bengotow
Reviewed By: bengotow
Maniphest Tasks: T1253
Differential Revision: https://phab.nylas.com/D1518
Summary:
This diff gives the ComponentRegistry a cleaner, smaller API. Instead of querying by name, location or role,
it's now just location and role, and you can register components for one or more location and one or more
roles without assigning the entries in the registry separate names.
When you register with the ComponentRegistry, the syntax is also cleaner and uses the component's displayName
instead of requiring you to provide a name. You also provide the actual component when unregistering, ensuring
that you can't unregister someone else's component.
InjectedComponent and InjectedComponentSet now wrap their children in UnsafeComponent, which prevents
render/component lifecycle problems from propogating.
Existing components have been updated:
1. maxWidth / minWidth are now containerStyles.maxWidth/minWidth
2. displayName is now required to use the CR.
3. containerRequired = false can be provided to exempt a component from being wrapped in an UnsafeComponent.
This is useful because it's slightly faster and keeps DOM flat.
This diff also makes the "Show Component Regions" more awesome. It displays column regions, since they now
use the InjectedComponentSet, and also shows for InjectedComponent as well as InjectedComponentSet.
Change ComponentRegistry syntax, lots more work on safely wrapping items. See description.
Fix for inline flexbox scenarios (message actions)
Allow ~/.inbox/packages to be symlinked to a github repo
Test Plan: Run tests!
Reviewers: evan
Reviewed By: evan
Differential Revision: https://review.inboxapp.com/D1457
Summary:
#### WIP! ####
This is making it all work with the association endpoint, putting
together the Salesforce Sidebar interfaces, and getting the nested
creators/updaters working.
I still need to do a bunch of UI work and actually debug the whole
workflow still
---
rename SalesforceContactStore to SalesforceSearchStore
rename SalesforceContact to SalesforceSearchResult
salesforce sidebar changes
salesforce association picker
object form store fixes
figuring out newFormItem instigators
Make SalesforceObjectFormStore declarative off SalesforceObjectStore
Make action basd handlers for SalesforceObjectStore
sidebar store create and associate
salesforce sidebar and picker fixes
association works and displays on sidebar
salesforce object form fixes
object form fixes
fix salesforce updating
Test Plan: TODO
Reviewers: bengotow
Reviewed By: bengotow
Differential Revision: https://review.inboxapp.com/D1440
Summary: fix(query): .count() queries are apparently coming back as strings. Never let this happen
Test Plan: Run 1 new test
Reviewers: evan
Reviewed By: evan
Subscribers: ktalwar
Differential Revision: https://review.inboxapp.com/D1441
Summary:
tests on the schemas
build input elements
form builder pulls data
grouping by row
salesforce object store
salesforce api logic
successfully pulling salesforce objects into db
object store saving to db
refactoring tokenizing text field
full documented tokenizing text field with specs
linking in object picker component
converting generated form to a controlled input
form change handlers for controlled inputs
Salesforce object creator store
new way of opening windows
removed atom.state.mode
create new salesforce object creator in new window
form creator loading in popup with generated form
generated form renders select and multiselcet and textarea
add checkbox
creating related objects
windnows know when others close
remove debugger statements
form submission
converting data for salesforce posting
hot window loading
new hot window registration
hot loading windows
actions for listening to salesforce objects created
generated form errors
error handling for salesforce object creator
rename saleforce object form store
display errors to form
submitting state passed through
properly posts objects to Salesforce
change name to salesforce object form
add deep clone
use formItemEach
styling for Salesforce form creator
salesforce required fields come back and populate form
generated form loads related objects into fields
remove console logs and fix sales schema adapter test
fix task queue and formbuilder specs
fix action bridge spec
fix tokenizing text field spec
fix draft store and tokenizing proptypes
fix linter issues
fix tokenizing text field bug
rename to refresh window props
remove console.log
Test Plan: edgehill --test
Reviewers: bengotow
Reviewed By: bengotow
Differential Revision: https://review.inboxapp.com/D1425
