Summary: After importing an uneven csv (not all rows have the same number of columns e.g. rows: [[1,2][3,4,5]]), deleting the last column would improperly delete data in rows with fewer columns. This is because we were slicing each row based on row.length - 1 which is not the same for all rows. Fixed this by creating a new variable newNumColumns which is columns.length - 1.
Test Plan: Added new test data with uneven data and added a test in table-data-source-spec for removeLastColumn on this uneven set.
Reviewers: juan
Reviewed By: juan
Subscribers: juan
Differential Revision: https://phab.nylas.com/D3133
Summary:
See https://phab.nylas.com/D3112 for full description
- Update EditorAPI.insertCustomComponent to take a pre-generated
anchorId
Test Plan: Unit tests + manual
Reviewers: bengotow, halla, jackie
Reviewed By: jackie
Differential Revision: https://phab.nylas.com/D3113
Summary:
Refactored signature preferences page to allow more signatures than the previous 1-1 mapping for signatures and accounts. Created a multi select dropdown of the accounts for which a certain signature is set as default for. Added a button into the draft header From field to toggle between saved signatures.
refactor(signatures): Add basic add/remove capabilities to static
refactor(signatures): Hooked up signature actions and signature store for basic functionality
fix(signatures): Cleaned up signature store and started on multiselectdropdown
fix(signatures): Add multi signature toggle select to multiselect dropdown
build(signatures): Built framework for multiselect dropdown
build(signatures): Toggle button functionality for dropdown
build(signatures): Build multi select from components and add debounce
refactor(signatures): Move signature actions and signature store into flux
fix(signatures): Styled composer signatures button/dropdown and fixed preferences checkmarks
build(signatures): Finish main functionality, about to refactor composer signature button into injected component
fix(signatures): Changed position styles
fix(signatures): Fixed background color for dropdown button when blurred
build(signatures): Began to write tests for signatures store, preferences and dropdown
Test Plan: Wrote tests for preferences signatures, signature store, signature composer dropdown and refactored tests for signature composer extension. For signature composer extension I removed applyTransformsToDraft and unapplyTransformsToDraft and tested by sending emails with signatures to different providers to make sure the <signature> tag caused problems.
Reviewers: bengotow, juan
Reviewed By: juan
Differential Revision: https://phab.nylas.com/D3073
Summary:
- Add some docs to Table components
- Updates Table components to use a TableDataSource instead of accessing arrays, cleans up code a bit
- Add enzyme lib to have a cleaner and simpler api to write tests for React Components
- Updates decorators to extend from the BaseComponent instead of vanilla Component, this way instance methods are still available on composed components
Test Plan: - Unit tests
Reviewers: evan, bengotow
Reviewed By: bengotow
Differential Revision: https://phab.nylas.com/D2941
Summary: Adds CSV imports, proper styles to mail merge plugin and fixes a handful of bugs
Test Plan: TODO
Reviewers: bengotow, evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D2925
Summary:
Keymaps & menus CSON => JSON, remove AtomKeymaps, CommandRegistry use of CSS selectors, use Mousetrap instead
Important Notes:
- The `application:` prefix is reserved for commands which are handled in the application process. Don't use it for other things. You will not receive the events in the window.
- Maintaining dynamic menus seems to come with quite an overhead, because Electron updates the entire menu every time. In the future, we'll need https://github.com/electron/electron/issues/528 to really make things nice. I will be tracking this upstream.
- The format for keyboard shortcuts has changed. `cmd-X` is now `command+shift+x`
Test Plan: Run tests
Reviewers: juan, evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D2917
Summary:
Adds a new unified "Spam" folder and a unified "Unread" view,
which shows all the messages in your inbox which are unread.
Test Plan: Run tests
Reviewers: evan, juan
Reviewed By: juan
Differential Revision: https://phab.nylas.com/D2901
Summary:
- Removes controlled focus in the composer!
- No React components ever perfom focus in lifecycle methods. Never again.
- A new `Utils.schedule({action, after, timeout})` helper makes it easy to say "setState or load draft, etc. and then focus"
- The DraftStore issues a focusDraft action after creating a draft, which causes the MessageList to focus and scroll to the desired composer, which itself decides which field to focus.
- The MessageList never focuses anything automatically.
- Refactors ComposerView apart — ComposerHeader handles all top fields, DraftSessionContainer handles draft session initialization and exposes props to ComposerView
- ComposerHeader now uses a KeyCommandRegion (with focusIn and focusOut) to do the expanding and collapsing of the participants fields. May rename that container very soon.
- Removes all CommandRegistry handling of tab and shift-tab. Unless you preventDefault, the browser does it's thing.
- Removes all tabIndexes greater than 1. This is an anti-pattern—assigning everything a tabIndex of 0 tells the browser to move between them based on their order in the DOM, and is almost always what you want.
- Adds "TabGroupRegion" which allows you to create a tab/shift-tabbing group, (so tabbing does not leave the active composer). Can't believe this isn't a browser feature.
Todos:
- Occasionally, clicking out of the composer contenteditable requires two clicks. This is because atomicEdit is restoring selection within the contenteditable and breaking blur.
- Because the ComposerView does not render until it has a draft, we're back to it being white in popout composers for a brief moment. We will fix this another way - all the "return unless draft" statements were untenable.
- Clicking a row in the thread list no longer shifts focus to the message list and focuses the last draft. This will be restored soon.
Test Plan: Broken
Reviewers: juan, evan
Reviewed By: juan, evan
Differential Revision: https://phab.nylas.com/D2814
Summary:
- FixedPopover now correctly adjusts itself when overflowing outside
window, in all directions
- Updates styles
- Adds specs
- Remove Popover and popover.less, and refactor all code that used it in
favor of the new FixedPopover
Test Plan: Unit tests
Reviewers: drew, evan, bengotow
Reviewed By: bengotow
Differential Revision: https://phab.nylas.com/D2697
Summary:
- Also refactors the code a bit for testability and maintainability
- Fixes#1515
Test Plan: - Unit tests
Reviewers: evan, drew, bengotow
Reviewed By: bengotow
Differential Revision: https://phab.nylas.com/D2651
Summary:
You can now break up blockquotes (as in quoted text areas) by pressing
"delete" at the start of a line. This allows you to reply inline.
Test Plan: new tests
Reviewers: bengotow, juan
Reviewed By: bengotow, juan
Differential Revision: https://phab.nylas.com/D2421
Summary:
- Fixes bug with Composer focus caused by injected component. The composer body
was being focused, but the cursor remained at the beginning of the content
instead of at the end. This was caused because the focus method was being
called before the content had actually been rendered to the dom.
- Adds a callback to check when injected comp was actually rendered, and uses
that to focus the body at the correct time.
- Updates specs
- Updates behavior of focusing composer body when selecting threads in split
mode -- resolves #T3444
- It will focus the body when a thread is selcted via a click
- It wont focus the body when a thread is selected via arrow keys
- It will focus the body when a new inline reply is created
- Updates specs
Test Plan: - Unit tests
Reviewers: evan, bengotow
Reviewed By: bengotow
Differential Revision: https://phab.nylas.com/D2393
Summary:
Originally, this was going to be a totally independent package, but
I wasn't able to isolate the functionality and get it tied in to
the delta-stream consumption. Here's how it currently works:
- The preferences package has a new tab which allows you to edit
mail filters. Filters are saved in a new core store, and a new
stock component (ScenarioEditor) renders the editor. The editor
takes a set of templates that define a value space, and outputs
a valid set of values.
- A new MailFilterProcessor takes messages and creates tasks to
apply the actions from the MailFiltersStore.
- The worker-sync package now uses the MailFilterProcessor to
apply filters /before/ it calls didPassivelyReceiveNewModels,
so filtrs are applied before any notifications are created.
- A new task, ReprocessMailFiltersTask allows you to run filters
on all of your existing mail. It leverages the existing TaskQueue
architecture to: a) resume where it left off if you quit midway,
b) be queryable (for status) from all windows and c) cancelable.
The TaskQueue is a bit strange because it runs performLocal and
performRemote very differently, and I had to use `performRemote`.
(todo refactor soon.)
This diff also changes the EditableList a bit to behave like a
controlled component and render focused / unfocused states.
Test Plan: Run tests, only for actual filter processing atm.
Reviewers: juan, evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D2379
Summary:
This provides a new API for `ContenteditableExtension`s. Instead of
manually manipulating the raw DOM and `Selection` objects, there's a new
`Editor` interface that encapsulates it and provides helper methods.
You can now do:
editor.select(someNode).createLink("foo").collapseToEnd()
Now raw methods like `execCommand` ONLY show up in the `Editor` interface
as well as most of the raw `Selection` APIs.
There are also more integration tests :)
Another major goal was cleaning up the contenteditable file itself. To
that end:
1. The DOMNormalizer got pulled out into its own extension
1. The TabManager is now its own extension
1. Url wrangling got moved into the FloatingToolbar control
1. There is now the concept of a `ContenteditableService`, which are
tightly-couple blocks of code separated out into logical units. These are
dependent on the core state, innerState, and props and are not full
extensions.
1. `MouseService` now handles all the click event logic
1. `ClipboardService` was modified to the new service architecture
Test Plan: script/grunt run-integration-tests
Reviewers: drew, juan, bengotow
Reviewed By: juan, bengotow
Differential Revision: https://phab.nylas.com/D2367
- When prop specified to not allow empty selection it should also
prevent it from being cleared when pressing Esc while focusing the list
- Adds a default value to the edit item input
- Updates specs
- Updates styles
Summary:
Adds the new Account preferences page. This consists of two major React components,
PreferencesAccountList and PreferencesAccountDetails, both of which use EditableList.
I added a bunch of fixes and updated the API for EditableList, plus a bit of
refactoring for PreferencesAccount component, and a bunch of CSS so its a big diff.
The detailed changelog:
Updates to EditableList:
- Fix bug updating selection state when arrows pressed to move selection
- Add new props:
- allowEmptySelection to allow the list to have no selection
- createInputProps to pass aditional props to the createInput
- Add scroll region for list items
- Update styles and refactor render methods
Other Updates:
- Updates Account model to hold aliases and a label
- Adds getter for label to default to email
- Update accountswitcher to display label, update styles and spec
- Refactor PreferencesAccounts component:
- Splits it into smaller components,
- Removes unused code
- Splits preferences styelsheets into smaller separate stylesheet for
account page. Adds some updates and fixes (scroll-region padding)
- Update AccountStore to be able to perform updates on an account.
- Adds new Action to update account, and an action to remove account to
be consistent with Action usage
- Adds components for Account list and Aliases list using EditableList
Test Plan: - All specs pass, but need to write new tests!
Reviewers: bengotow, evan
Reviewed By: bengotow
Differential Revision: https://phab.nylas.com/D2332
Summary:
Related to #320, #494, #515, #553
Ignore newlines and returns in HTML, they can be inside tags
Allow all attributes so that paste from excel looks nice
Never let someone paste a `contenteditable` attribute
Update specs
Test Plan: Run new specs
Reviewers: juan, evan
Reviewed By: evan
Differential Revision: https://phab.nylas.com/D2309
Summary:
- Generic list component wich supports adding, editing and removing
string-like items or components
- Needs some css love
Test Plan: - Unit tests.
Reviewers: evan, bengotow
Reviewed By: bengotow
Differential Revision: https://phab.nylas.com/D2322
comment
Adding test harness
Using key strokes in main window test
Tests work now
Clean up argument variables
Rename list manager and get rid of old spec-helper methods
Extract out time overrides from spec-helper
Spectron test for contenteditable
fix spec exit codes and boot mode
fix(spec): cleanup N1.sh and make specs fail with exit code 1
Revert tests and get it working in window
Move to spec_integration and add window load tester
Specs pass. Console logs still in
Remove console logs
Extract N1 Launcher ready method
Make integrated unit test runner
feat(tests): adding integration tests
Summary:
The /spectron folder got moved to /spec_integration
There are now unit tests (the old ones) run via the renamed
`script/grunt run-unit-tests`
There are now integration tests run via the command `script/grunt
run-integration-tests`.
There are two types of integration tests:
1. Tests that operate on the whole app via Selenium/Chromedriver. These
tests have access to Spectron APIs but do NOT have access to any JS object
running inside the application. See the `app-boot-spec.es6` for an example
of these tests. This is tricky because we want to test the Main window,
but Spectron may latch onto any other of our loading windows. Code in
`integration-helper` give us an API that finds and loads the main window
so we can test it
2. Tests that run in the unit test suite that need Spectron to perform
integration-like behavior. These are the contentedtiable specs. The
Spectron server is accessed from the app and can be used to trigger
actions on the running app, from the app. These tests use the
windowed-test runner so Spectron can identify whether the tests have
completed, passed, or failed. Unfortunately Spectron can't access the logs
, nor the exit code of the test script thereby forcing us to parse the
HTML DOM. (Note this is still a WIP)
I also revamped the `N1.sh` file when getting the launch arguments to work
properly. It's much cleaner. We didn't need most of the data.
Test Plan: new tests
Reviewers: juan, bengotow
Differential Revision: https://phab.nylas.com/D2289
Fix composer specs
Tests can properly detect when Spectron is in the environment
Report plain text output in specs
fixing contenteditable specs
Testing slow keymaps on contenteditable specs
Move to DOm mutation
Spell as `subtree` not `subTree`
