proxmark3/.gitignore

# .gitignore
# don't push these files to the repository

*.log
*.eml
*.o
*.a
*.d
*.elf
*.s19
*.map
*.bin
*.dll
*.moc.cpp
*.z
*.exe
proxmark
proxmark3
flasher
version.c
lua
luac

fpga/*
!fpga/tests
!fpga/fpga_lf.bit
!fpga/fpga_hf.bit
!fpga/*.v
!fpga/Makefile
!fpga/fpga.ucf
!fpga/xst_lf.scr
!fpga/xst_hf.scr
!fpga/go.bat
!fpga/sim.tcl
Provide .gitignore to prevent unwanted files to be committed 2014-03-26 04:31:37 +08:00			`# .gitignore`
			`# don't push these files to the repository`

git housekeeping: - added .log files to .gitignore - new file .gitattributes: tell git not to diff or merge binary .bit (FPGA) files 2014-06-28 01:23:42 +08:00			`*.log`
add *.eml to .gitignore 2014-08-06 00:45:37 +08:00			`*.eml`
Provide .gitignore to prevent unwanted files to be committed 2014-03-26 04:31:37 +08:00			`*.o`
			`*.a`
			`*.d`
			`*.elf`
			`*.s19`
			`*.map`
			`*.bin`
			`*.dll`
			`*.moc.cpp`
replaced gzip with an own compressor tool (fpga_compress.c, based on zlib) This allows to remove the gzip header support and the z_crc32.[ch] files (which saves more than 2KBytes of the ARM's flash memory) 2015-04-26 16:49:03 +08:00			`*.z`
Provide .gitignore to prevent unwanted files to be committed 2014-03-26 04:31:37 +08:00			`*.exe`
			`proxmark`
Added lua, luac and proxmark3 (compieled binaries) to .gitignore. 2014-04-03 03:51:35 +08:00			`proxmark3`
Provide .gitignore to prevent unwanted files to be committed 2014-03-26 04:31:37 +08:00			`flasher`
			`version.c`
Added lua, luac and proxmark3 (compieled binaries) to .gitignore. 2014-04-03 03:51:35 +08:00			`lua`
			`luac`
Provide .gitignore to prevent unwanted files to be committed 2014-03-26 04:31:37 +08:00
			`fpga/*`
New LF edge detection algorithm + lowpass filter This is a new LF edge detection algorithm for the FPGA. - It uses a low-pass IIR filter to clean the signal (see https://fail0verflow.com/blog/2014/proxmark3-fpga-iir-filter.html) - The algorithm is able to detect consecutive peaks in the same direction - It uses an envelope follower to dynamically adjust the peak thresholds - The main threshold used in the envelope follower can be set from the ARM side fpga/lf_edge_detect.v, fpga/lp20khz_1MSa_iir_filter.v, fpga/min_max_tracker.v: New file. fpga/lo_edge_detect.v, fpga/fpga_lf.v: Modify accordingly. armsrc/apps.h (FPGA_CMD_SET_USER_BYTE1, FPGA_CMD_SET_EDGE_DETECT_THRESHOLD): New FPGA command. fpga/fpga_lf.v: Modify accordingly/Add a 8bit user register. fpga/fpga_lf.bit: Update accordingly. fpga/tests: New directory for testbenches fpga/tests/Makefile: New file. It compiles the testbenches and runs all the tests by default (comparing with the golden output) fpga/tests/tb_lp20khz_1MSa_iir_filter.v, fpga/tests/tb_min_max_tracker.v, fpga/tests/tb_lf_edge_detect.v: New testbenches fpga/tests/plot_edgedetect.py: New script to plot the results from the edge detection tests. fpga/tests/tb_data: New directory for data and golden outputs 2014-06-22 06:26:38 +08:00			`!fpga/tests`
THIS REQUIRES A BOOTROM UPDATE!! To save FPGA area, split the LF and HF bitstreams and load them on-demand. 2014-06-20 07:02:59 +08:00			`!fpga/fpga_lf.bit`
			`!fpga/fpga_hf.bit`
Provide .gitignore to prevent unwanted files to be committed 2014-03-26 04:31:37 +08:00			`!fpga/*.v`
			`!fpga/Makefile`
			`!fpga/fpga.ucf`
THIS REQUIRES A BOOTROM UPDATE!! To save FPGA area, split the LF and HF bitstreams and load them on-demand. 2014-06-20 07:02:59 +08:00			`!fpga/xst_lf.scr`
			`!fpga/xst_hf.scr`
Provide .gitignore to prevent unwanted files to be committed 2014-03-26 04:31:37 +08:00			`!fpga/go.bat`
			`!fpga/sim.tcl`