proxmark3/client/lualibs/commands.lua

223 lines
11 KiB
Lua
Raw Normal View History

--[[
These are command definitions. This file should correspond exactly to usb_cmd.h.
--]]
--// For the bootloader
local _commands = {
CMD_DEVICE_INFO = 0x0000,
CMD_SETUP_WRITE = 0x0001,
CMD_FINISH_WRITE = 0x0003,
CMD_HARDWARE_RESET = 0x0004,
CMD_START_FLASH = 0x0005,
CMD_NACK = 0x00fe,
CMD_ACK = 0x00ff,
--// For general mucking around
CMD_DEBUG_PRINT_STRING = 0x0100,
CMD_DEBUG_PRINT_INTEGERS = 0x0101,
CMD_DEBUG_PRINT_BYTES = 0x0102,
CMD_LCD_RESET = 0x0103,
CMD_LCD = 0x0104,
CMD_BUFF_CLEAR = 0x0105,
CMD_READ_MEM = 0x0106,
CMD_VERSION = 0x0107,
--// For low-frequency tags
CMD_READ_TI_TYPE = 0x0202,
CMD_WRITE_TI_TYPE = 0x0203,
CMD_DOWNLOADED_RAW_BITS_TI_TYPE = 0x0204,
CMD_ACQUIRE_RAW_ADC_SAMPLES_125K = 0x0205,
CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K = 0x0206,
CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K = 0x0207,
CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K = 0x0208,
CMD_DOWNLOADED_SIM_SAMPLES_125K = 0x0209,
CMD_SIMULATE_TAG_125K = 0x020A,
CMD_HID_DEMOD_FSK = 0x020B,
CMD_HID_SIM_TAG = 0x020C,
CMD_SET_LF_DIVISOR = 0x020D,
CMD_LF_SIMULATE_BIDIR = 0x020E,
CMD_SET_ADC_MUX = 0x020F,
CMD_HID_CLONE_TAG = 0x0210,
CMD_EM410X_WRITE_TAG = 0x0211,
CMD_INDALA_CLONE_TAG = 0x0212,
--// for 224 bits UID
CMD_INDALA_CLONE_TAG_L = 0x0213,
CMD_T55XX_READ_BLOCK = 0x0214,
CMD_T55XX_WRITE_BLOCK = 0x0215,
CMD_T55XX_READ_TRACE = 0x0216,
CMD_PCF7931_READ = 0x0217,
CMD_EM4X_READ_WORD = 0x0218,
CMD_EM4X_WRITE_WORD = 0x0219,
CMD_IO_DEMOD_FSK = 0x021A,
CMD_IO_CLONE_TAG = 0x021B,
CMD_EM410X_DEMOD = 0x021c,
CMD_SET_LF_SAMPLING_CONFIG = 0x021d,
CMD_FSK_SIM_TAG = 0x021E,
CMD_ASK_SIM_TAG = 0x021F,
--/* CMD_SET_ADC_MUX: ext1 is 0 for lopkd, 1 for loraw, 2 for hipkd, 3 for hiraw */
--// For the 13.56 MHz tags
CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693 = 0x0300,
CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_14443 = 0x0301,
CMD_READ_SRI512_TAG = 0x0303,
CMD_READ_SRIX4K_TAG = 0x0304,
CMD_READER_ISO_15693 = 0x0310,
CMD_SIMTAG_ISO_15693 = 0x0311,
CMD_RECORD_RAW_ADC_SAMPLES_ISO_15693 = 0x0312,
CMD_ISO_15693_COMMAND = 0x0313,
CMD_ISO_15693_COMMAND_DONE = 0x0314,
CMD_ISO_15693_FIND_AFI = 0x0315,
CMD_ISO_15693_DEBUG = 0x0316,
CMD_LF_SNOOP_RAW_ADC_SAMPLES = 0x0317,
--// For Hitag2 transponders
CMD_SNOOP_HITAG = 0x0370,
CMD_SIMULATE_HITAG = 0x0371,
CMD_READER_HITAG = 0x0372,
CMD_SIMULATE_TAG_HF_LISTEN = 0x0380,
CMD_SIMULATE_TAG_ISO_14443 = 0x0381,
CMD_SNOOP_ISO_14443 = 0x0382,
CMD_SNOOP_ISO_14443a = 0x0383,
CMD_SIMULATE_TAG_ISO_14443a = 0x0384,
CMD_READER_ISO_14443a = 0x0385,
CMD_SIMULATE_TAG_LEGIC_RF = 0x0387,
CMD_READER_LEGIC_RF = 0x0388,
CMD_WRITER_LEGIC_RF = 0x0389,
CMD_EPA_PACE_COLLECT_NONCE = 0x038A,
--//CMD_EPA_ = 0x038B,
CMD_SNOOP_ICLASS = 0x0392,
CMD_SIMULATE_TAG_ICLASS = 0x0393,
CMD_READER_ICLASS = 0x0394,
CMD_READER_ICLASS_REPLAY = 0x0395,
CMD_ICLASS_ISO14443A_WRITE = 0x0397,
--// For measurements of the antenna tuning
CMD_MEASURE_ANTENNA_TUNING = 0x0400,
CMD_MEASURE_ANTENNA_TUNING_HF = 0x0401,
CMD_MEASURED_ANTENNA_TUNING = 0x0410,
CMD_LISTEN_READER_FIELD = 0x0420,
--// For direct FPGA control
CMD_FPGA_MAJOR_MODE_OFF = 0x0500,
--// For mifare commands
CMD_MIFARE_SET_DBGMODE = 0x0600,
CMD_MIFARE_EML_MEMCLR = 0x0601,
CMD_MIFARE_EML_MEMSET = 0x0602,
CMD_MIFARE_EML_MEMGET = 0x0603,
CMD_MIFARE_EML_CARDLOAD = 0x0604,
--// magic chinese card commands
CMD_MIFARE_CSETBLOCK = 0x0605,
CMD_MIFARE_CGETBLOCK = 0x0606,
CMD_MIFARE_CIDENT = 0x0607,
CMD_SIMULATE_MIFARE_CARD = 0x0610,
CMD_READER_MIFARE = 0x0611,
CMD_MIFARE_NESTED = 0x0612,
CMD_MIFARE_READBL = 0x0620,
CMD_MIFAREU_READBL = 0x0720,
CMD_MIFARE_READSC = 0x0621,
CMD_MIFAREU_READCARD = 0x0721,
CMD_MIFARE_WRITEBL = 0x0622,
CMD_MIFAREU_WRITEBL = 0x0722,
CMD_MIFAREU_WRITEBL_COMPAT = 0x0723,
CMD_MIFARE_CHKKEYS = 0x0623,
CMD_MIFARE_SNIFFER = 0x0630,
--//ultralightC
CMD_MIFAREUC_AUTH1 = 0x0724,
CMD_MIFAREUC_AUTH2 = 0x0725,
CMD_MIFAREUC_READCARD = 0x0726,
--// mifare desfire
CMD_MIFARE_DESFIRE_READBL = 0x0728,
CMD_MIFARE_DESFIRE_WRITEBL = 0x0729,
CMD_MIFARE_DESFIRE_AUTH1 = 0x072a,
CMD_MIFARE_DESFIRE_AUTH2 = 0x072b,
CMD_MIFARE_DES_READER = 0x072c,
CMD_MIFARE_DESFIRE_INFO = 0x072d,
CMD_MIFARE_DESFIRE = 0x072e,
CMD_UNKNOWN = 0xFFFF,
}
local _reverse_lookup,k,v = {}
for k, v in pairs(_commands) do
_reverse_lookup[v] = k
end
_commands.tostring = function(command)
if(type(command) == 'number') then
return ("%s (%d)"):format(_reverse_lookup[command]or "ERROR UNDEFINED!", command)
end
return ("Error, numeric argument expected, got : %s"):format(tostring(command))
end
Command = {
new = function(self, o)
local o = o or {} -- create object if user does not provide one
setmetatable(o, self) -- DIY inheritance a'la javascript
self.__index = self
o.cmd = o.cmd or _commands.CMD_UNKNOWN
--o.arg1 = "test"
o.arg1 = o.arg1 or 0
o.arg2 = o.arg2 or 0
o.arg3 = o.arg3 or 0
local data = o.data or "0"
if(type(data) == 'string') then
-- We need to check if it is correct length, otherwise pad it
local len = string.len(data)
if(len < 1024) then
--Should be 1024 hex characters to represent 512 bytes of data
data = data .. string.rep("0",1024 - len )
end
if(len > 1024) then
-- OOps, a bit too much data here
print( ( "WARNING: data size too large, was %s chars, will be truncated "):format(len) )
--
data = data:sub(1,1024)
end
else
print(("WARNING; data was NOT a (hex-) string, but was %s"):format(type(data)))
end
o.data = data
return o
end,
parse = function (packet)
local count,cmd,arg1,arg2,arg3,data = bin.unpack('LLLLH512',packet)
return Command:new{cmd = cmd, arg1 = arg1, arg2 = arg2, arg3 = arg3, data = data}
end,
}
function Command:__tostring()
local output = ("%s\r\nargs : (%s, %s, %s)\r\ndata:\r\n%s\r\n"):format(
_commands.tostring(self.cmd),
tostring(self.arg1),
tostring(self.arg2),
tostring(self.arg3),
tostring(self.data))
return output
end
function Command:getBytes()
--If a hex-string has been used
local data = self.data
local cmd = self.cmd
local arg1, arg2, arg3 = self.arg1, self.arg2, self.arg3
return bin.pack("LLLLH",cmd, arg1, arg2, arg3,data);
end
return _commands