* allow additional 2 ssp_frame cycles to detect SOF
* use only respective functions to get/set iso14a_timeout
* remove waiting time in MifareAcquireEncryptedNonces(). This is covered by GetATQA() now.
Improve hf mf chk and hf mf nested
* hf mf chk. added interrupt of procedure by usb
* extract mifare default keys into separate module
* arm side multisector `hf mf chk`
* hf mf nested. change key search procedure
* hf mf nested. added key check after we have found a key.
* small fix hf list f
* hf mf chk. add timeout (arm side) and some tweaks.
* Improve 'Magic' Mifare tags detection
* Magic Mifare tags detection and version printing
* Magic s50/1k tag halt error correction for cload and csave
* hf mf c* commands for gen1b
* Use |= for bitwise operation
* gen1b: don't issue wipe command and don't expect response from WUPC1 magic command after a SELECT_UID: old UID display works in hf mf csetuid
* hf mf cgetsc compatibility for 4k
* hf mf csave compatibility for 4k
* hf mf cload compatibility for 4k, suppress halt errors messages for debug level 2
* Revert to MF_DBG_ERROR level in mifare_classic_halt() and don't issue the halt command for gen1b
* Improve 'Magic' Mifare tags generation detection & hf mf c* commands magic 4k compatibility
any memory from BigBuf[]. This is required because FpgaDownloadAndGo() might
allocate, use, and free most of BigBuf[] when decompressing FPGA configs.
- cleanup: remove rests of deprecated "end of trace markers" (0x44)
+ add xor calc to util (prep for desfire)
commented out MifareUWriteBlockCompat as it isn't used in client
currently (it is a command we could support.. but why?)
relabeled a few device side mfu functions to be clearer.
- provided a BigBuf_malloc() function to dynamically allocate parts of BigBuf
e.g. for DMA-Buffers, Frame-Buffers, Emulator-Memory
- the whole rest of BigBuf is now available for traces (instead of a small fixed amount)
- send actual traceLen together with trace data
- changed client side to cope with varying traceLen
- changed small buffers to automatic variables instead of parts of BigBuf
ADD: added a manufacturer list in "hf 14a reader", only viable when UID is double or triple size. Thanks to Asper for the list.
ADD: detect chinese magic backdoor commands in "hf 14a reader"
CHG: minor code clean up.
CHG: USB_CMD_DATA_SIZE is now used as maxsize for transfer of data between client and pm3device
CHG: suggested a fix for the underscore problem in ioclass\fileutils.c
ADD: tnp3xx support
ADD: nxp tag idents.
ADD: identifiction of chinese backdoor commands to hf 14a reader.
- buffers were too small to handle 256 byte frames
- parity bits were only handled for up to 32 byte frames
- trace format was inefficient
- removed parity calculation from decoders in iclass.c (parity not used on air anyway)
- hf mf rdsc (fix): didn't account for 16 block sectors, allowed max sector 63 instead of 39
- hf mf ecfill (add): added (optional) card size parameter and support for non 1K cards
- hf mf dump (add): added (optional) card size parameter and support for non 1K cards
- hf mf dump (fix): Access Condition 011 not handled correctly (tried to access with key A)
- hf mf restore (add): added (optional) card size parameter and support for non 1K cards
- hf mf nested (fix): didn't account for 16 block sectors, allowed max sector 63 instead of 39
- hf mf nested (fix): always dumped 16 keys to dumpkeys.bin instead of correct number
- hf mf chk (fix): always dumped 16 keys to dumpkeys.bin instead of correct number
- hf mf eget (fix): displayed three instead of one block
- hf mf eload (add): load 4K .eml files (but accepts 1K .eml files for backwards compatibility)
- hf mf esave (add): always save the whole emulator memory (4K) instead of 1K only
- hf mf ecfill (add): added (optional) card size parameter and support for non 1K cards
- enhanced tracing: hf 14a list now shows meaningful timing information. With new option f it also shows the frame delay times (fdt)
- small fix for hf 14b list - it used to run into the trace trailer
- hf 14a sim now obeys iso14443 timing (fdt of 1172 or 1234 resp.)
Note: you need to flash FPGA as well.
More details in http://www.proxmark.org/forum/viewtopic.php?pid=9721#p9721
- PM: used GetCountMifare in MifareNested() for improved timing accuracy and to deliver better quality nonces
- PM: MifareNested now delivers exactly two different nonces to avoid time consuming multiple lfsr_recovery32() on client side
- Client: replaced quicksort by bucketsort in crapto1.c which is faster
- Client: use multithreading (two parallel calls to lfsr_recovery32())
- Client: fixed a small bug in mfnested() (always showed trgkey=0)
- Client: introduced a mutex for PrintAndLog() to avoid interlaced printing
Minor rework of hf mf chk:
- Avoid time consuming off/on cycles. Send a "halt" instead.
