+ Add common area at end of RAM to communicate between main os and bootrom
+ Lower stack end to make room for common area
+ Implement CMD_DEVICE_INFO in both OS and bootrom to give information about the current state and supported features
+ Allow hands-free firmware update: When CMD_START_FLASH is received over USB in OS mode, the device will reset and enter the bootrom
Pressing the button in hands-free update mode takes precedence: releasing the button will immediately abort firmware update and
perform a reset. Do not press the button.
+ Require each flash sequence to be preceded by a CMD_START_FLASH to set up the boundaries for the following flash sequence
Not compatible with linux flasher before SVN revision 200
Currently no compatible flasher for Windows. WINDOWS USERS: DO NOT UPDATE YOUR BOOTROM YET
+ Protect bootrom flash area unless magic unlock sequence is given in CMD_START_FLASH
Use perl to create the version information (thereby re-creating the perl dependency and adding an svn dependency) but fall back in case of missing perl or svn
Retire rbt2c.pl, instead use objcopy to directly convert the .bit file into an .o that can be linked with the flash image
Rename armsrc/fpga.c to armsrc/fpgaloader.c (since there is now a new fpga.o, created from fpga.bit)
Remove fpgaimg.c from subversion, add fpga.bit
Instead of creating fpgaimage.elf and osimage.elf separately, now create a joined fullimage.elf
first (obsoleting ldscript-full), then extract only the fpga and os sections with objcopy
(This creates unspecific warnings about an empty segment, need to investigate)
Implement a rudimentary .bit parser in the firmware, use that to locate the bitstream in the new
fpgaimage (which is just a plain copy of the fpga.bit file) and send it to the FPGA
The code will check the format that's in flash and fall back to the legacy format
It is identical to the popular 20081211, with the doob addition (20090301), a
linux client, and two additional commands for LF analysis. Let me know if
you find issues here!
