- buffers were too small to handle 256 byte frames
- parity bits were only handled for up to 32 byte frames
- trace format was inefficient
- removed parity calculation from decoders in iclass.c (parity not used on air anyway)
- enhanced tracing: hf 14a list now shows meaningful timing information. With new option f it also shows the frame delay times (fdt)
- small fix for hf 14b list - it used to run into the trace trailer
- hf 14a sim now obeys iso14443 timing (fdt of 1172 or 1234 resp.)
Note: you need to flash FPGA as well.
More details in http://www.proxmark.org/forum/viewtopic.php?pid=9721#p9721
- PM: used GetCountMifare in MifareNested() for improved timing accuracy and to deliver better quality nonces
- PM: MifareNested now delivers exactly two different nonces to avoid time consuming multiple lfsr_recovery32() on client side
- Client: replaced quicksort by bucketsort in crapto1.c which is faster
- Client: use multithreading (two parallel calls to lfsr_recovery32())
- Client: fixed a small bug in mfnested() (always showed trgkey=0)
- Client: introduced a mutex for PrintAndLog() to avoid interlaced printing
Minor rework of hf mf chk:
- Avoid time consuming off/on cycles. Send a "halt" instead.
-According to ISO14443-4, the block number (bit 0) in the PCB needs to be flipped every once in a while. Not doing so leads to the card not responding to commands anymore. The flipping is done according to the standard now.
-Declare iso14_apdu in iso14443a.h to enable usage from other .c files
-iso14_apdu now returns 0 if ReaderReceive returned 0 (to distinguish between the case that ReaderReceive returns -1 and the case that it returns 0)
-Added a new function to change the timeout (to enable changing it from other .c files without the need for a global variable)
2. added abilities to: clear, get, set, load from card, load from nested card emulator dump
3. tried to fix proxmark promt have seen everywhere (not so good)
4. reorganized arm code
2. emulator commands select, authenticate, read block, write block works
3. nested authentication - not working (maybe next release)
4. small bugfixes
5. mifare1ksim - in alpha state!!! code not so clear!!!
