// ISO15693 commons // Adrian Dabrowski 2010 and others, GPLv2 #ifndef ISO15693_H__ #define ISO15693_H__ // ISO15693 CRC #define ISO15_CRC_PRESET (uint16_t)0xFFFF #define ISO15_CRC_POLY (uint16_t)0x8408 #define ISO15_CRC_CHECK ((uint16_t)(~0xF0B8 & 0xFFFF)) // use this for checking of a correct crc // REQUEST FLAGS #define ISO15_REQ_SUBCARRIER_SINGLE 0x00 // Tag should respond using one subcarrier (ASK) #define ISO15_REQ_SUBCARRIER_TWO 0x01 // Tag should respond using two subcarriers (FSK) #define ISO15_REQ_DATARATE_LOW 0x00 // Tag should respond using low data rate #define ISO15_REQ_DATARATE_HIGH 0x02 // Tag should respond using high data rate #define ISO15_REQ_NONINVENTORY 0x00 #define ISO15_REQ_INVENTORY 0x04 // This is an inventory request - see inventory flags #define ISO15_REQ_PROTOCOL_NONEXT 0x00 #define ISO15_REQ_PROTOCOL_EXT 0x08 // RFU // REQUEST FLAGS when INVENTORY is not set #define ISO15_REQ_SELECT 0x10 // only selected cards response #define ISO15_REQ_ADDRESS 0x20 // this req contains an address #define ISO15_REQ_OPTION 0x40 // Command specific option selector //REQUEST FLAGS when INVENTORY is set #define ISO15_REQINV_AFI 0x10 // AFI Field is present #define ISO15_REQINV_SLOT1 0x20 // 1 Slot #define ISO15_REQINV_SLOT16 0x00 // 16 Slots #define ISO15_REQINV_OPTION 0x40 // Command specific option selector //RESPONSE FLAGS #define ISO15_RES_ERROR 0x01 #define ISO15_RES_EXT 0x08 // Protocol Extention // RESPONSE ERROR CODES #define ISO15_NOERROR 0x00 #define ISO15_ERROR_CMD_NOT_SUP 0x01 // Command not supported #define ISO15_ERROR_CMD_NOT_REC 0x02 // Command not recognized (eg. parameter error) #define ISO15_ERROR_CMD_OPTION 0x03 // Command option not supported #define ISO15_ERROR_GENERIC 0x0F // No additional Info about this error #define ISO15_ERROR_BLOCK_UNAVAILABLE 0x10 #define ISO15_ERROR_BLOCK_LOCKED_ALREADY 0x11 // cannot lock again #define ISO15_ERROR_BLOCK_LOCKED 0x12 // cannot be changed #define ISO15_ERROR_BLOCK_WRITE 0x13 // Writing was unsuccessful #define ISO15_ERROR_BLOCL_WRITELOCK 0x14 // Locking was unsuccessful // COMMAND CODES #define ISO15_CMD_INVENTORY 0x01 #define ISO15_CMD_STAYQUIET 0x02 #define ISO15_CMD_READ 0x20 #define ISO15_CMD_WRITE 0x21 #define ISO15_CMD_LOCK 0x22 #define ISO15_CMD_READMULTI 0x23 #define ISO15_CMD_WRITEMULTI 0x24 #define ISO15_CMD_SELECT 0x25 #define ISO15_CMD_RESET 0x26 #define ISO15_CMD_WRITEAFI 0x27 #define ISO15_CMD_LOCKAFI 0x28 #define ISO15_CMD_WRITEDSFID 0x29 #define ISO15_CMD_LOCKDSFID 0x2A #define ISO15_CMD_SYSINFO 0x2B #define ISO15_CMD_SECSTATUS 0x2C uint16_t Iso15693Crc(uint8_t *v, int n); int Iso15693AddCrc(uint8_t *req, int n); char* Iso15693sprintUID(char *target,uint8_t *uid); //----------------------------------------------------------------------------- // Map a sequence of octets (~layer 2 command) into the set of bits to feed // to the FPGA, to transmit that command to the tag. // Mode: highspeed && one subcarrier (ASK) //----------------------------------------------------------------------------- // The sampling rate is 106.353 ksps/s, for T = 18.8 us // SOF defined as // 1) Unmodulated time of 56.64us // 2) 24 pulses of 423.75khz // 3) logic '1' (unmodulated for 18.88us followed by 8 pulses of 423.75khz) static const int Iso15693FrameSOF[] = { -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1, 1, 1, 1, 1, 1, 1, 1, 1 }; static const int Iso15693Logic0[] = { 1, 1, 1, 1, 1, 1, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1 }; static const int Iso15693Logic1[] = { -1, -1, -1, -1, -1, -1, -1, -1, 1, 1, 1, 1, 1, 1, 1, 1 }; // EOF defined as // 1) logic '0' (8 pulses of 423.75khz followed by unmodulated for 18.88us) // 2) 24 pulses of 423.75khz // 3) Unmodulated time of 56.64us static const int Iso15693FrameEOF[] = { 1, 1, 1, 1, 1, 1, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }; #endif