mirror of
https://github.com/Proxmark/proxmark3.git
synced 2024-09-21 23:36:51 +08:00
6658905f18
It is identical to the popular 20081211, with the doob addition (20090301), a linux client, and two additional commands for LF analysis. Let me know if you find issues here!
77 lines
1.9 KiB
Verilog
77 lines
1.9 KiB
Verilog
//-----------------------------------------------------------------------------
|
|
// The way that we connect things when transmitting a command to an ISO
|
|
// 15693 tag, using 100% modulation only for now.
|
|
//
|
|
// Jonathan Westhues, April 2006
|
|
//-----------------------------------------------------------------------------
|
|
|
|
module hi_read_tx(
|
|
pck0, ck_1356meg, ck_1356megb,
|
|
pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4,
|
|
adc_d, adc_clk,
|
|
ssp_frame, ssp_din, ssp_dout, ssp_clk,
|
|
cross_hi, cross_lo,
|
|
dbg,
|
|
shallow_modulation
|
|
);
|
|
input pck0, ck_1356meg, ck_1356megb;
|
|
output pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4;
|
|
input [7:0] adc_d;
|
|
output adc_clk;
|
|
input ssp_dout;
|
|
output ssp_frame, ssp_din, ssp_clk;
|
|
input cross_hi, cross_lo;
|
|
output dbg;
|
|
input shallow_modulation;
|
|
|
|
// The high-frequency stuff. For now, for testing, just bring out the carrier,
|
|
// and allow the ARM to modulate it over the SSP.
|
|
reg pwr_hi;
|
|
reg pwr_oe1;
|
|
reg pwr_oe2;
|
|
reg pwr_oe3;
|
|
reg pwr_oe4;
|
|
always @(ck_1356megb or ssp_dout or shallow_modulation)
|
|
begin
|
|
if(shallow_modulation)
|
|
begin
|
|
pwr_hi <= ck_1356megb;
|
|
pwr_oe1 <= ~ssp_dout;
|
|
pwr_oe2 <= ~ssp_dout;
|
|
pwr_oe3 <= ~ssp_dout;
|
|
pwr_oe4 <= 1'b0;
|
|
end
|
|
else
|
|
begin
|
|
pwr_hi <= ck_1356megb & ssp_dout;
|
|
pwr_oe1 <= 1'b0;
|
|
pwr_oe2 <= 1'b0;
|
|
pwr_oe3 <= 1'b0;
|
|
pwr_oe4 <= 1'b0;
|
|
end
|
|
end
|
|
|
|
// Then just divide the 13.56 MHz clock down to produce appropriate clocks
|
|
// for the synchronous serial port.
|
|
|
|
reg [6:0] hi_div_by_128;
|
|
|
|
always @(posedge ck_1356meg)
|
|
hi_div_by_128 <= hi_div_by_128 + 1;
|
|
|
|
assign ssp_clk = hi_div_by_128[6];
|
|
|
|
reg [2:0] hi_byte_div;
|
|
|
|
always @(negedge ssp_clk)
|
|
hi_byte_div <= hi_byte_div + 1;
|
|
|
|
assign ssp_frame = (hi_byte_div == 3'b000);
|
|
|
|
assign ssp_din = 1'b0;
|
|
|
|
assign pwr_lo = 1'b0;
|
|
assign dbg = ssp_frame;
|
|
|
|
endmodule
|