mirror of
https://github.com/Proxmark/proxmark3.git
synced 2024-11-13 12:15:44 +08:00
3b2fee43ea
This is a new LF edge detection algorithm for the FPGA. - It uses a low-pass IIR filter to clean the signal (see https://fail0verflow.com/blog/2014/proxmark3-fpga-iir-filter.html) - The algorithm is able to detect consecutive peaks in the same direction - It uses an envelope follower to dynamically adjust the peak thresholds - The main threshold used in the envelope follower can be set from the ARM side fpga/lf_edge_detect.v, fpga/lp20khz_1MSa_iir_filter.v, fpga/min_max_tracker.v: New file. fpga/lo_edge_detect.v, fpga/fpga_lf.v: Modify accordingly. armsrc/apps.h (FPGA_CMD_SET_USER_BYTE1, FPGA_CMD_SET_EDGE_DETECT_THRESHOLD): New FPGA command. fpga/fpga_lf.v: Modify accordingly/Add a 8bit user register. fpga/fpga_lf.bit: Update accordingly. fpga/tests: New directory for testbenches fpga/tests/Makefile: New file. It compiles the testbenches and runs all the tests by default (comparing with the golden output) fpga/tests/tb_lp20khz_1MSa_iir_filter.v, fpga/tests/tb_min_max_tracker.v, fpga/tests/tb_lf_edge_detect.v: New testbenches fpga/tests/plot_edgedetect.py: New script to plot the results from the edge detection tests. fpga/tests/tb_data: New directory for data and golden outputs
87 lines
2.3 KiB
Makefile
87 lines
2.3 KiB
Makefile
#-----------------------------------------------------------------------------
|
|
# Copyright (C) 2014 iZsh <izsh at fail0verflow.com>
|
|
#
|
|
# This code is licensed to you under the terms of the GNU GPL, version 2 or,
|
|
# at your option, any later version. See the LICENSE.txt file for the text of
|
|
# the license.
|
|
#-----------------------------------------------------------------------------
|
|
|
|
TEST_OUTDIR = tb_tmp
|
|
|
|
TB_SOURCES = \
|
|
tb_lp20khz_1MSa_iir_filter.v \
|
|
tb_min_max_tracker.v \
|
|
tb_lf_edge_detect.v
|
|
|
|
TBS = $(TB_SOURCES:.v=.vvp)
|
|
|
|
TB_DATA = \
|
|
pcf7931_write1byte_1MSA_data \
|
|
pcf7931_read_1MSA_data
|
|
|
|
all: $(TBS) tests
|
|
|
|
%.vvp: %.v
|
|
iverilog -I .. -o $@ $<
|
|
|
|
clean:
|
|
rm -rf *.vvp $(TEST_OUTDIR)
|
|
|
|
tests: tb_lp20khz_1MSa_iir_filter tb_min_max_tracker tb_lf_edge_detect
|
|
|
|
tb_lp20khz_1MSa_iir_filter: tb_lp20khz_1MSa_iir_filter.vvp | test_dir
|
|
@printf "Testing $@\n"
|
|
@for d in $(TB_DATA); do \
|
|
$(call run_test,$@.vvp,$$d,in); \
|
|
$(call check_golden,$$d,filtered); \
|
|
done; \
|
|
rm -f $(TEST_OUTDIR)/data.*
|
|
|
|
tb_min_max_tracker: tb_min_max_tracker.vvp | test_dir
|
|
@printf "Testing $@\n"
|
|
@for d in $(TB_DATA); do \
|
|
$(call run_test,$@.vvp,$$d,in filtered.gold); \
|
|
$(call check_golden,$$d,min); \
|
|
$(call check_golden,$$d,max); \
|
|
done; \
|
|
rm -f $(TEST_OUTDIR)/data.*
|
|
|
|
tb_lf_edge_detect: tb_lf_edge_detect.vvp | test_dir
|
|
@printf "Testing $@\n"
|
|
@for d in $(TB_DATA); do \
|
|
$(call run_test,$@.vvp,$$d,in filtered.gold); \
|
|
$(call check_golden,$$d,min); \
|
|
$(call check_golden,$$d,max); \
|
|
$(call check_golden,$$d,state); \
|
|
$(call check_golden,$$d,toggle); \
|
|
$(call check_golden,$$d,high); \
|
|
$(call check_golden,$$d,highz); \
|
|
$(call check_golden,$$d,lowz); \
|
|
$(call check_golden,$$d,low); \
|
|
done; \
|
|
rm -f $(TEST_OUTDIR)/data.*
|
|
|
|
test_dir:
|
|
@if [ ! -d $(TEST_OUTDIR) ] ; then mkdir $(TEST_OUTDIR) ; fi
|
|
|
|
.PHONY: all clean
|
|
|
|
# $(1) = basename
|
|
# $(2) = extension to check
|
|
check_golden = \
|
|
printf " Checking $(1).$(2)... "; \
|
|
mv $(TEST_OUTDIR)/data.$(2) $(TEST_OUTDIR)/$(1).$(2); \
|
|
if cmp -s tb_data/$(1).$(2).gold $(TEST_OUTDIR)/$(1).$(2); then \
|
|
printf "OK\n"; \
|
|
else \
|
|
printf "ERROR\n"; \
|
|
fi
|
|
|
|
# $(1) = vvp file
|
|
# $(2) = data basename
|
|
# $(3) = data extensions to copy
|
|
run_test = \
|
|
env echo " With $(2)... "; \
|
|
cp tb_data/$(2).time $(TEST_OUTDIR); \
|
|
for e in $(3); do cp tb_data/$(2).$$e $(TEST_OUTDIR)/data.$$e; done; \
|
|
./$(1)
|