mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2024-11-14 13:44:49 +08:00
99 lines
2.5 KiB
Markdown
99 lines
2.5 KiB
Markdown
|
|
||
|
|
# Parrot OS Installation
|
||
|
|
|
||
|
|
## Notes
|
||
|
|
|
||
|
|
Some further notes can be found at @5w0rdfish repo [Proxmark Installation for Parrot OS](https://github.com/5w0rdfish/Proxmark3-RDV4-ParrotOS)
|
||
|
|
|
||
|
|
# Video Installation guide
|
||
|
|
[](https://youtu.be/Wl9AsrU4igo "ParrotOS Installation Tutorial")
|
||
|
|
|
||
|
|
|
||
|
|
---
|
||
|
|
## Manual Install
|
||
|
|
First what we want to do is get an update for the system. If you need to upgrade do this **before** the install
|
||
|
|
|
||
|
|
### Update
|
||
|
|
```sh
|
||
|
|
sudo apt-get update
|
||
|
|
```
|
||
|
|
### Requirements.
|
||
|
|
|
||
|
|
```sh
|
||
|
|
sudo apt-get install p7zip git build-essential libreadline5 libreadline-dev \
|
||
|
|
libusb-0.1-4 libusb-dev libqt4-dev perl pkg-config wget libncurses5-dev gcc-arm-none-eabi
|
||
|
|
```
|
||
|
|
If you do get any issues during the requirements installation, I have found it to help using the synaptic package manager.
|
||
|
|
|
||
|
|
### Clone Fork
|
||
|
|
```sh
|
||
|
|
git clone https://github.com/RfidResearchGroup/proxmark3.git
|
||
|
|
```
|
||
|
|
|
||
|
|
### Change directory into the directory created
|
||
|
|
```sh
|
||
|
|
cd proxmark3
|
||
|
|
```
|
||
|
|
|
||
|
|
### Get the latest commits
|
||
|
|
```sh
|
||
|
|
git pull
|
||
|
|
```
|
||
|
|
|
||
|
|
### Make Udev
|
||
|
|
Iceman has made the udev script which takes care of the blacklist rules. This should take care of the remove modem manager.
|
||
|
|
The make udev command also create's an alias for the pm3 under /dev which you will use to connect to the proxmark.
|
||
|
|
|
||
|
|
```sh
|
||
|
|
sudo make udev
|
||
|
|
```
|
||
|
|
|
||
|
|
> **Note** If you have any issues connecting or during the flash, follow the steps listed [here](https://github.com/RfidResearchGroup/proxmark3/issues/35) and use the command sudo apt remove modemmanager
|
||
|
|
|
||
|
|
Log out and log back in again. And now we are all set to take the next step.
|
||
|
|
|
||
|
|
### Clean and Compile
|
||
|
|
Clean and complete compilation *within the proxmark3 folder*
|
||
|
|
|
||
|
|
```sh
|
||
|
|
make clean && make all
|
||
|
|
```
|
||
|
|
### Check Connection
|
||
|
|
Once this is complete run the following comands to make sure the proxmark is being picked up by your computer.
|
||
|
|
|
||
|
|
```sh
|
||
|
|
sudo dmesg | grep -i usb
|
||
|
|
```
|
||
|
|
It should show up as a CDC device:
|
||
|
|
```sh
|
||
|
|
[10416.555108] usb 2-1.2: Product: PM3
|
||
|
|
[10416.555111] usb 2-1.2: Manufacturer: proxmark.org
|
||
|
|
[10416.555871] cdc_acm 2-1.2:1.0: ttyACM0: USB ACM device
|
||
|
|
```
|
||
|
|
|
||
|
|
### Flash the BOOTROM & FULLIMAGE
|
||
|
|
```sh
|
||
|
|
client/flasher /dev/ttyACM0 -b bootrom/obj/bootrom.elf armsrc/obj/fullimage.elf
|
||
|
|
```
|
||
|
|
### Change into the client folder
|
||
|
|
|
||
|
|
```sh
|
||
|
|
cd client
|
||
|
|
```
|
||
|
|
### Run the client
|
||
|
|
``` sh
|
||
|
|
./proxmark3 /dev/pm #press tab on the keyboard for it to detect the proxmark
|
||
|
|
```
|
||
|
|
or
|
||
|
|
|
||
|
|
### Run the client
|
||
|
|
```sh
|
||
|
|
./proxmark3 /dev/ttyACM0
|
||
|
|
```
|
||
|
|
|
||
|
|
### Run a test command
|
||
|
|
```sh
|
||
|
|
hw tune
|
||
|
|
```
|
||
|
|
|