proxmark3/doc/md/Use_of_Proxmark/2_Configuration-and-Verification.md

### First things on your RDV40
You will need to run these commands to make sure your rdv4 is prepared
```
pm3 --> mem load f default_keys m
pm3 --> mem load f default_pwd t
pm3 --> mem load f default_iclass_keys i
pm3 --> lf t55xx deviceconfig a 29 b 17 c 15 d 47 e 15 p
```

### Verify sim module firmware version

To make sure you got the latest sim module firmware.

_Lastest version is v3.11_

```
pm3 --> hw status
```

Find version in the long output,  look for these two lines

```
#db# Smart card module (ISO 7816)
#db#   version.................v2.06
```

This version is obsolete. The following command upgrades your device sim module firmware.
Don't not turn off your device during the execution of this command!!

```
pm3 --> sc upgrade f ../tools/simmodule/SIM011.BIN 
```

You get the following output if the execution was successful:

```
[!] WARNING - Smartcard socket firmware upgrade.
[!] A dangerous command, do wrong and you will brick the smart card socket
[+] Smartcard socket firmware uploading to PM3
..
[+] Smartcard socket firmware updating,  don't turn off your PM3!
#db# FW 0000
#db# FW 0080
#db# FW 0100
#db# FW 0180
#db# FW 0200
#db# FW 0280
[+] Smartcard socket firmware upgraded successful        
```

## Next steps

For the next steps, please read the following page:

* [Commands & Features](/doc/md/Use_of_Proxmark/3_Commands-and-Features.md)