proxmark3/include/protocols.h

#ifndef PROTOCOLS_H
#define PROTOCOLS_H

#include "common.h"

//The following data is taken from http://www.proxmark.org/forum/viewtopic.php?pid=13501#p13501
/*
ISO14443A (usually NFC tags)
    26 (7bits) = REQA
    30 = Read (usage: 30+1byte block number+2bytes ISO14443A-CRC - answer: 16bytes)
    A2 = Write (usage: A2+1byte block number+4bytes data+2bytes ISO14443A-CRC - answer: 0A [ACK] or 00 [NAK])
    52 (7bits) = WUPA (usage: 52(7bits) - answer: 2bytes ATQA)
    93 20 = Anticollision (usage: 9320 - answer: 4bytes UID+1byte UID-bytes-xor)
    93 70 = Select (usage: 9370+5bytes 9320 answer - answer: 1byte SAK)
    95 20 = Anticollision of cascade level2
    95 70 = Select of cascade level2
    50 00 = Halt (usage: 5000+2bytes ISO14443A-CRC - no answer from card)
Mifare
    60 = Authenticate with KeyA
    61 = Authenticate with KeyB
    40 (7bits) = Used to put Chinese Changeable UID cards in special mode (must be followed by 43 (8bits) - answer: 0A)
    C0 = Decrement
    C1 = Increment
    C2 = Restore
    B0 = Transfer
Ultralight C
    A0 = Compatibility Write (to accomodate MIFARE commands)
    1A = Step1 Authenticate
    AF = Step2 Authenticate


ISO14443B
    05 = REQB
    1D = ATTRIB
    50 = HALT

    BA = PING (reader -> tag)
    AB = PONG (tag -> reader)
SRIX4K (tag does not respond to 05)
    06 00 = INITIATE
    0E xx = SELECT ID (xx = Chip-ID)
    0B = Get UID
    08 yy = Read Block (yy = block number)
    09 yy dd dd dd dd = Write Block (yy = block number; dd dd dd dd = data to be written)
    0C = Reset to Inventory
    0F = Completion
    0A 11 22 33 44 55 66 = Authenticate (11 22 33 44 55 66 = data to authenticate)


ISO15693
    MANDATORY COMMANDS (all ISO15693 tags must support those)
        01 = Inventory (usage: 260100+2bytes ISO15693-CRC - answer: 12bytes)
        02 = Stay Quiet
    OPTIONAL COMMANDS (not all tags support them)
        20 = Read Block (usage: 0220+1byte block number+2bytes ISO15693-CRC - answer: 4bytes)
        21 = Write Block (usage: 0221+1byte block number+4bytes data+2bytes ISO15693-CRC - answer: 4bytes)
        22 = Lock Block
        23 = Read Multiple Blocks (usage: 0223+1byte 1st block to read+1byte last block to read+2bytes ISO15693-CRC)
        24 = Write Multiple Blocks
        25 = Select
        26 = Reset to Ready
        27 = Write AFI
        28 = Lock AFI
        29 = Write DSFID
        2A = Lock DSFID
        2B = Get_System_Info (usage: 022B+2bytes ISO15693-CRC - answer: 14 or more bytes)
        2C = Read Multiple Block Security Status (usage: 022C+1byte 1st block security to read+1byte last block security to read+2bytes ISO15693-CRC)

EM Microelectronic CUSTOM COMMANDS
    A5 = Active EAS (followed by 1byte IC Manufacturer code+1byte EAS type)
    A7 = Write EAS ID (followed by 1byte IC Manufacturer code+2bytes EAS value)
    B8 = Get Protection Status for a specific block (followed by 1byte IC Manufacturer code+1byte block number+1byte of how many blocks after the previous is needed the info)
    E4 = Login (followed by 1byte IC Manufacturer code+4bytes password)
NXP/Philips CUSTOM COMMANDS
    A0 = Inventory Read
    A1 = Fast Inventory Read
    A2 = Set EAS
    A3 = Reset EAS
    A4 = Lock EAS
    A5 = EAS Alarm
    A6 = Password Protect EAS
    A7 = Write EAS ID
    A8 = Read EPC
    B0 = Inventory Page Read
    B1 = Fast Inventory Page Read
    B2 = Get Random Number
    B3 = Set Password
    B4 = Write Password
    B5 = Lock Password
    B6 = Bit Password Protection
    B7 = Lock Page Protection Condition
    B8 = Get Multiple Block Protection Status
    B9 = Destroy SLI
    BA = Enable Privacy
    BB = 64bit Password Protection
    40 = Long Range CMD (Standard ISO/TR7003:1990)

ISO 7816-4 Basic interindustry commands. For command APDU's.
    B0 = READ BINARY
    D0 = WRITE BINARY
    D6 = UPDATE BINARY
    0E = ERASE BINARY
    B2 = READ RECORDS
    D2 = WRITE RECORDS
    E2 = APPEND RECORD
    DC = UPDATE RECORD
    CA = GET DATA
    DA = PUT DATA
    A4 = SELECT FILE
    20 = VERIFY
    88 = INTERNAL AUTHENTICATION
    82 = EXTERNAL AUTHENTICATION
    B4 = GET CHALLENGE
    70 = MANAGE CHANNEL

    For response APDU's
    90 00 = OK
    6x xx = ERROR
*/
// these cmds are adjusted to ISO15693 and Manchester encoding requests.
// for instance ICLASS_CMD_SELECT  0x81 tells if ISO14443b/BPSK coding/106 kbits/s
// for instance ICLASS_CMD_SELECT  0x41 tells if ISO14443b/BPSK coding/423 kbits/s
//
#define ICLASS_CMD_HALT             0x0
#define ICLASS_CMD_SELECT           0x1
#define ICLASS_CMD_ACTALL           0xA
#define ICLASS_CMD_DETECT           0xF

#define ICLASS_CMD_PAGESEL          0x4
#define ICLASS_CMD_CHECK            0x5
#define ICLASS_CMD_READ4            0x6
#define ICLASS_CMD_UPDATE           0x7
#define ICLASS_CMD_READCHECK        0x8
#define ICLASS_CMD_READ_OR_IDENTIFY 0xC
#define ICLASS_CMD_ACT              0xE

#define ICLASS_CREDIT(x)            (((x) & 0x10) == 0x10)
#define ICLASS_DEBIT(x)             (((x) & 0x80) == 0x80)


#define ISO14443A_CMD_REQA          0x26
#define ISO14443A_CMD_READBLOCK     0x30
#define ISO14443A_CMD_WUPA          0x52
#define ISO14443A_CMD_OPTS          0x35
#define ISO14443A_CMD_ANTICOLL_OR_SELECT     0x93
#define ISO14443A_CMD_ANTICOLL_OR_SELECT_2   0x95
#define ISO14443A_CMD_ANTICOLL_OR_SELECT_3   0x97
#define ISO14443A_CMD_WRITEBLOCK    0xA0
#define ISO14443A_CMD_HALT          0x50
#define ISO14443A_CMD_RATS          0xE0
#define ISO14443A_CMD_NXP_DESELECT  0xC2

#define MIFARE_SELECT_CT            0x88
#define MIFARE_AUTH_KEYA            0x60
#define MIFARE_AUTH_KEYB            0x61
#define MIFARE_MAGICWUPC1           0x40
#define MIFARE_MAGICWUPC2           0x43
#define MIFARE_MAGICWIPEC           0x41
#define MIFARE_CMD_INC              0xC0
#define MIFARE_CMD_DEC              0xC1
#define MIFARE_CMD_RESTORE          0xC2
#define MIFARE_CMD_TRANSFER         0xB0

#define MIFARE_EV1_PERSONAL_UID     0x40
#define MIFARE_EV1_SETMODE          0x43
#define MIFARE_EV1_UIDF0            0x00
#define MIFARE_EV1_UIDF1            0x40
#define MIFARE_EV1_UIDF2            0x20
#define MIFARE_EV1_UIDF3            0x60

#define MIFARE_ULC_WRITE            0xA2
#define MIFARE_ULC_COMP_WRITE       0xA0
#define MIFARE_ULC_AUTH_1           0x1A
#define MIFARE_ULC_AUTH_2           0xAF

#define MIFARE_ULEV1_AUTH           0x1B
#define MIFARE_ULEV1_VERSION        0x60
#define MIFARE_ULEV1_FASTREAD       0x3A
#define MIFARE_ULEV1_READ_CNT       0x39
#define MIFARE_ULEV1_INCR_CNT       0xA5
#define MIFARE_ULEV1_READSIG        0x3C
#define MIFARE_ULEV1_CHECKTEAR      0x3E
#define MIFARE_ULEV1_VCSL           0x4B

// New Mifare UL Nano commands.  Ref:: (https://www.nxp.com/docs/en/data-sheet/MF0UN_H_00.pdf)
#define MIFARE_ULNANO_WRITESIG      0xA9
#define MIFARE_ULNANO_LOCKSIF       0xAC

// mifare 4bit card answers
#define CARD_ACK      0x0A  // 1010 - ACK
#define CARD_NACK_IV  0x00  // 0000 - NACK, invalid argument (invalid page address)
#define CARD_NACK_PA  0x01  // 0001 - NACK, parity / crc error
#define CARD_NACK_NA  0x04  // 0100 - NACK, not allowed (command not allowed)
#define CARD_NACK_TR  0x05  // 0101 - NACK, transmission error
#define CARD_NACK_EE  0x07  // 0111 - NACK, EEPROM write error

// Magic Generation 1, parameter "work flags"
// bit 0 - need get UID
// bit 1 - send wupC (wakeup chinese)
// bit 2 - send HALT cmd after sequence
// bit 3 - turn on FPGA
// bit 4 - turn off FPGA
// bit 5 - set datain instead of issuing USB reply (called via ARM for StandAloneMode14a)
#define MAGIC_UID                   0x01
#define MAGIC_WUPC                  0x02
#define MAGIC_HALT                  0x04
#define MAGIC_INIT                  0x08
#define MAGIC_OFF                   0x10
#define MAGIC_DATAIN                0x20
#define MAGIC_WIPE                  0x40
#define MAGIC_SINGLE                (MAGIC_WUPC | MAGIC_HALT | MAGIC_INIT | MAGIC_OFF) //0x1E

// by CMD_HF_MIFARE_CIDENT
#define MAGIC_GEN_1A 1
#define MAGIC_GEN_1B 2
#define MAGIC_GEN_2  4
#define MAGIC_GEN_UNFUSED 5
/**
06 00 = INITIATE
0E xx = SELECT ID (xx = Chip-ID)
0B = Get UID
08 yy = Read Block (yy = block number)
09 yy dd dd dd dd = Write Block (yy = block number; dd dd dd dd = data to be written)
0C = Reset to Inventory
0F = Completion
0A 11 22 33 44 55 66 = Authenticate (11 22 33 44 55 66 = data to authenticate)
**/

#define ISO14443B_REQB         0x05
#define ISO14443B_ATTRIB       0x1D
#define ISO14443B_HALT         0x50
#define ISO14443B_INITIATE     0x06
#define ISO14443B_SELECT       0x0E
#define ISO14443B_GET_UID      0x0B
#define ISO14443B_READ_BLK     0x08
#define ISO14443B_WRITE_BLK    0x09
#define ISO14443B_RESET        0x0C
#define ISO14443B_COMPLETION   0x0F
#define ISO14443B_AUTHENTICATE 0x0A
#define ISO14443B_PING         0xBA
#define ISO14443B_PONG         0xAB


// defined crypto RF commands
// only interpreting channel 1 communication
#define CRYPTORF_SET_USER_ZONE      0x11
#define CRYPTORF_READ_USER_ZONE     0x12
#define CRYPTORF_WRITE_USER_ZONE    0x13
#define CRYPTORF_WRITE_SYSTEM_ZONE  0x14
#define CRYPTORF_READ_SYSTEM_ZONE   0x16
#define CRYPTORF_VERIFY_CRYPTO      0x18
#define CRYPTORF_SEND_CHECKSUM      0x19
#define CRYPTORF_DESELECT           0x1A
#define CRYPTORF_IDLE               0x1B
#define CRYPTORF_CHECK_PASSWORD     0x1C

// defined Crypto RF errors
#define CRYPTORF_ERR_ACCESS_DENIED_ZONE               0x99
#define CRYPTORF_ERR_PARAM_INVALID                    0xA1
#define CRYPTORF_ERR_ADDRES_INVALID                   0xA2
#define CRYPTORF_ERR_LENGTH_INVALID                   0xA3
#define CRYPTORF_ERR_AUTH_ENC_REQ                     0xA9
#define CRYPTORF_ERR_ACCESS_DENIED_WLOCK              0xB9
#define CRYPTORF_ERR_BYTE_ACCESS_DENIED_NOT_ALLOWED   0xBA
#define CRYPTORF_ERR_ACCESS_DENIED_NOT_ALLOWED        0xBA
#define CRYPTORF_ERR_BYTE_ACCESS_DENIED_PASSWD_REQ    0xBC
#define CRYPTORF_ERR_CHECKSUM_FAIL2                   0xC8
#define CRYPTORF_ERR_CHECKSUM_FAIL                    0xC9
#define CRYPTORF_ERR_PASSWD_REQ                       0xD9
#define CRYPTORF_ERR_FUSE_ACCESS_DENIED               0xDF
#define CRYPTORF_ERR_MODIFY_FORBIDDEN                 0xE9
#define CRYPTORF_ERR_ACCESS_DENIED_FUSE_ORDR          0xE9
#define CRYPTORF_ERR_MEMORY_WRITE_DATA_M              0xED
#define CRYPTORF_ERR_MEMORY_ACCESS                    0xEE
#define CRYPTORF_ERR_MEMORY_ACCESS_SEC                0xF9

//First byte is 26
#define ISO15693_INVENTORY     0x01
#define ISO15693_STAYQUIET     0x02
//First byte is 02
#define ISO15693_READBLOCK                   0x20
#define ISO15693_WRITEBLOCK                  0x21
#define ISO15693_LOCKBLOCK                   0x22
#define ISO15693_READ_MULTI_BLOCK            0x23
#define ISO15693_WRITE_MULTI_BLOCK           0x24
#define ISO15693_SELECT                      0x25
#define ISO15693_RESET_TO_READY              0x26
#define ISO15693_WRITE_AFI                   0x27
#define ISO15693_LOCK_AFI                    0x28
#define ISO15693_WRITE_DSFID                 0x29
#define ISO15693_LOCK_DSFID                  0x2A
#define ISO15693_GET_SYSTEM_INFO             0x2B
#define ISO15693_READ_MULTI_SECSTATUS        0x2C
// NXP/Philips custom commands
#define ISO15693_INVENTORY_READ              0xA0
#define ISO15693_FAST_INVENTORY_READ         0xA1
#define ISO15693_SET_EAS                     0xA2
#define ISO15693_RESET_EAS                   0xA3
#define ISO15693_LOCK_EAS                    0xA4
#define ISO15693_EAS_ALARM                   0xA5
#define ISO15693_PASSWORD_PROTECT_EAS        0xA6
#define ISO15693_WRITE_EAS_ID                0xA7
#define ISO15693_READ_EPC                    0xA8
#define ISO15693_GET_NXP_SYSTEM_INFO         0xAB
#define ISO15693_INVENTORY_PAGE_READ         0xB0
#define ISO15693_FAST_INVENTORY_PAGE_READ    0xB1
#define ISO15693_GET_RANDOM_NUMBER           0xB2
#define ISO15693_SET_PASSWORD                0xB3
#define ISO15693_WRITE_PASSWORD              0xB4
#define ISO15693_LOCK_PASSWORD               0xB5
#define ISO15693_PROTECT_PAGE                0xB6
#define ISO15693_LOCK_PAGE_PROTECTION        0xB7
#define ISO15693_GET_MULTI_BLOCK_PROTECTION  0xB8
#define ISO15693_DESTROY                     0xB9
#define ISO15693_ENABLE_PRIVACY              0xBA
#define ISO15693_64BIT_PASSWORD_PROTECTION   0xBB
#define ISO15693_STAYQUIET_PERSISTENT        0xBC
#define ISO15693_READ_SIGNATURE              0xBD

// Topaz command set:
#define TOPAZ_REQA                    0x26 // Request
#define TOPAZ_WUPA                    0x52 // WakeUp
#define TOPAZ_RID                     0x78 // Read ID
#define TOPAZ_RALL                    0x00 // Read All (all bytes)
#define TOPAZ_READ                    0x01 // Read (a single byte)
#define TOPAZ_WRITE_E                 0x53 // Write-with-erase (a single byte)
#define TOPAZ_WRITE_NE                0x1a // Write-no-erase (a single byte)
// additional commands for Dynamic Memory Model
#define TOPAZ_RSEG                    0x10 // Read segment
#define TOPAZ_READ8                   0x02 // Read (eight bytes)
#define TOPAZ_WRITE_E8                0x54 // Write-with-erase (eight bytes)
#define TOPAZ_WRITE_NE8               0x1B // Write-no-erase (eight bytes)

// Definitions of which protocol annotations there are available
#define ISO_14443A       0
#define ICLASS           1
#define ISO_14443B       2
#define TOPAZ            3
#define ISO_7816_4       4
#define MFDES            5
#define LEGIC            6
#define ISO_15693        7
#define FELICA           8
#define PROTO_MIFARE     9
#define PROTO_HITAG1    10
#define THINFILM        11
#define LTO             12
#define PROTO_HITAG2    13
#define PROTO_HITAGS    14
#define PROTO_CRYPTORF  15

// Picopass fuses
#define FUSE_FPERS   0x80
#define FUSE_CODING1 0x40
#define FUSE_CODING0 0x20
#define FUSE_CRYPT1  0x10
#define FUSE_CRYPT0  0x08
#define FUSE_FPROD1  0x04
#define FUSE_FPROD0  0x02
#define FUSE_RA      0x01

// Picopass Pagemode fuses
#define PICOPASS_NON_SECURE_PAGEMODE 0x01
#define PICOPASS_SECURE_PAGEMODE     0x11


// ISO 7816-4 Basic interindustry commands. For command APDU's.
#define ISO7816_READ_BINARY             0xB0
#define ISO7816_WRITE_BINARY            0xD0
#define ISO7816_UPDATE_BINARY           0xD6
#define ISO7816_ERASE_BINARY            0x0E
#define ISO7816_READ_RECORDS            0xB2
#define ISO7816_WRITE_RECORDS           0xD2
#define ISO7816_APPEND_RECORD           0xE2
#define ISO7816_UPDATE_RECORD           0xDC
#define ISO7816_GET_DATA                0xCA
#define ISO7816_PUT_DATA                0xDA
#define ISO7816_SELECT_FILE             0xA4
#define ISO7816_VERIFY                  0x20
#define ISO7816_INTERNAL_AUTHENTICATION 0x88
#define ISO7816_EXTERNAL_AUTHENTICATION 0x82
#define ISO7816_GET_CHALLENGE           0x84
#define ISO7816_MANAGE_CHANNEL          0x70

#define ISO7816_GET_RESPONSE            0xC0
// ISO7816-4 For response APDU's
#define ISO7816_OK                      0x9000
// 6x xx = ERROR

// MIFARE DESFire command set:
#define MFDES_AUTHENTICATE              0x0A  // AUTHENTICATE_NATIVE
#define MFDES_AUTHENTICATE_ISO          0x1A  // AUTHENTICATE_STANDARD
#define MFDES_AUTHENTICATE_AES          0xAA

#define MFDES_CREDIT                    0x0C
#define MFDES_LIMITED_CREDIT            0x1C
#define MFDES_WRITE_RECORD              0x3B
#define MFDES_READSIG                   0x3C
#define MFDES_WRITE_DATA                0x3D
#define MFDES_GET_KEY_SETTINGS          0x45
#define MFDES_GET_UID                   0x51
#define MFDES_CHANGE_KEY_SETTINGS       0x54
#define MFDES_SELECT_APPLICATION        0x5A
#define MFDES_CHANGE_FILE_SETTINGS      0x5F
#define MFDES_GET_VERSION               0x60
#define MFDES_GET_ISOFILE_IDS           0x61
#define MFDES_GET_KEY_VERSION           0x64
#define MFDES_GET_APPLICATION_IDS       0x6A
#define MFDES_GET_VALUE                 0x6C
#define MFDES_GET_FREE_MEMORY           0x6E
#define MFDES_GET_DF_NAMES              0x6D
#define MFDES_GET_FILE_IDS              0x6F
#define MFDES_ABORT_TRANSACTION         0xA7
#define MFDES_ADDITIONAL_FRAME          0xAF
#define MFDES_READ_RECORDS              0xBB
#define MFDES_READ_DATA                 0xBD
#define MFDES_CREATE_CYCLIC_RECORD_FILE 0xC0
#define MFDES_CREATE_LINEAR_RECORD_FILE 0xC1
#define MFDES_CHANGE_KEY                0xC4
#define MFDES_COMMIT_TRANSACTION        0xC7
#define MFDES_CREATE_APPLICATION        0xCA
#define MFDES_CREATE_BACKUP_DATA_FILE   0xCB
#define MFDES_CREATE_VALUE_FILE         0xCC
#define MFDES_CREATE_STD_DATA_FILE      0xCD
#define MFDES_DELETE_APPLICATION        0xDA
#define MFDES_DEBIT                     0xDC
#define MFDES_DELETE_FILE               0xDF
#define MFDES_CLEAR_RECORD_FILE         0xEB
#define MFDES_GET_FILE_SETTINGS         0xF5
#define MFDES_FORMAT_PICC               0xFC


// MIFARE DESFire status & error codes:
#define MFDES_S_OPERATION_OK            0x00
#define MFDES_S_NO_CHANGES              0x0C
#define MFDES_S_SIGNATURE               0x90
#define MFDES_S_ADDITIONAL_FRAME        0xAF

#define MFDES_E_OUT_OF_EEPROM           0x0E
#define MFDES_E_ILLEGAL_COMMAND_CODE    0x1C
#define MFDES_E_INTEGRITY_ERROR         0x1E
#define MFDES_E_NO_SUCH_KEY             0x40
#define MFDES_E_LENGTH                  0x7E
#define MFDES_E_PERMISSION_DENIED       0x9D
#define MFDES_E_PARAMETER_ERROR         0x9E
#define MFDES_E_APPLICATION_NOT_FOUND   0xA0
#define MFDES_E_APPL_INTEGRITY          0xA1
#define MFDES_E_AUTHENTIFICATION_ERROR  0xAE
#define MFDES_E_BOUNDARY                0xBE
#define MFDES_E_PICC_INTEGRITY          0xC1
#define MFDES_E_COMMAND_ABORTED         0xCA
#define MFDES_E_PICC_DISABLED           0xCD
#define MFDES_E_COUNT                   0xCE
#define MFDES_E_DUPLICATE               0xDE
#define MFDES_E_EEPROM                  0xEE
#define MFDES_E_FILE_NOT_FOUND          0xF0
#define MFDES_E_FILE_INTEGRITY          0xF1


// LEGIC Commands
#define LEGIC_MIM_22                    0x0D
#define LEGIC_MIM_256                   0x1D
#define LEGIC_MIM_1024                  0x3D
#define LEGIC_ACK_22                    0x19
#define LEGIC_ACK_256                   0x39
#define LEGIC_READ                      0x01
#define LEGIC_WRITE                     0x00

/* T55x7 configuration register definitions */
#define T55x7_POR_DELAY                 0x00000001
#define T55x7_ST_TERMINATOR             0x00000008
#define T55x7_PWD                       0x00000010
#define T55x7_MAXBLOCK_SHIFT            5
#define T55x7_AOR                       0x00000200
#define T55x7_PSKCF_RF_2                0
#define T55x7_PSKCF_RF_4                0x00000400
#define T55x7_PSKCF_RF_8                0x00000800
#define T55x7_MODULATION_DIRECT         0
#define T55x7_MODULATION_PSK1           0x00001000
#define T55x7_MODULATION_PSK2           0x00002000
#define T55x7_MODULATION_PSK3           0x00003000
#define T55x7_MODULATION_FSK1           0x00004000
#define T55x7_MODULATION_FSK2           0x00005000
#define T55x7_MODULATION_FSK1a          0x00006000
#define T55x7_MODULATION_FSK2a          0x00007000
#define T55x7_MODULATION_MANCHESTER     0x00008000
#define T55x7_MODULATION_BIPHASE        0x00010000
#define T55x7_MODULATION_DIPHASE        0x00018000
#define T55x7_X_MODE                    0x00020000
#define T55x7_BITRATE_RF_8              0
#define T55x7_BITRATE_RF_16             0x00040000
#define T55x7_BITRATE_RF_32             0x00080000
#define T55x7_BITRATE_RF_40             0x000C0000
#define T55x7_BITRATE_RF_50             0x00100000
#define T55x7_BITRATE_RF_64             0x00140000
#define T55x7_BITRATE_RF_100            0x00180000
#define T55x7_BITRATE_RF_128            0x001C0000
#define T55x7_TESTMODE_DISABLED         0x60000000

/* T5555 (Q5) configuration register definitions */
#define T5555_ST_TERMINATOR             0x00000001
#define T5555_MAXBLOCK_SHIFT            0x00000001
#define T5555_MODULATION_MANCHESTER     0
#define T5555_MODULATION_PSK1           0x00000010
#define T5555_MODULATION_PSK2           0x00000020
#define T5555_MODULATION_PSK3           0x00000030
#define T5555_MODULATION_FSK1           0x00000040
#define T5555_MODULATION_FSK2           0x00000050
#define T5555_MODULATION_BIPHASE        0x00000060
#define T5555_MODULATION_DIRECT         0x00000070
#define T5555_INVERT_OUTPUT             0x00000080
#define T5555_PSK_RF_2                  0
#define T5555_PSK_RF_4                  0x00000100
#define T5555_PSK_RF_8                  0x00000200
#define T5555_USE_PWD                   0x00000400
#define T5555_USE_AOR                   0x00000800
#define T5555_SET_BITRATE(x)            (((x-2)/2)<<12)
#define T5555_GET_BITRATE(x)            ((((x >> 12) & 0x3F)*2)+2)
#define T5555_BITRATE_SHIFT             12 //(RF=2n+2)   ie 64=2*0x1F+2   or n = (RF-2)/2
#define T5555_FAST_WRITE                0x00004000
#define T5555_PAGE_SELECT               0x00008000
#define T5555_FIXED                     0x60000000

#define T55XX_WRITE_TIMEOUT 1500

// em4x05 & em4x69 chip configuration register definitions
#define EM4x05_GET_BITRATE(x)           (((x & 0x3F)*2)+2)
#define EM4x05_SET_BITRATE(x)           ((x-2)/2)
#define EM4x05_MODULATION_NRZ           0x00000000
#define EM4x05_MODULATION_MANCHESTER    0x00000040
#define EM4x05_MODULATION_BIPHASE       0x00000080
#define EM4x05_MODULATION_MILLER        0x000000C0 //not supported by all 4x05/4x69 chips
#define EM4x05_MODULATION_PSK1          0x00000100 //not supported by all 4x05/4x69 chips
#define EM4x05_MODULATION_PSK2          0x00000140 //not supported by all 4x05/4x69 chips
#define EM4x05_MODULATION_PSK3          0x00000180 //not supported by all 4x05/4x69 chips
#define EM4x05_MODULATION_FSK1          0x00000200 //not supported by all 4x05/4x69 chips
#define EM4x05_MODULATION_FSK2          0x00000240 //not supported by all 4x05/4x69 chips
#define EM4x05_PSK_RF_2                 0
#define EM4x05_PSK_RF_4                 0x00000400
#define EM4x05_PSK_RF_8                 0x00000800
#define EM4x05_MAXBLOCK_SHIFT           14
#define EM4x05_FIRST_USER_BLOCK         5
#define EM4x05_SET_NUM_BLOCKS(x)        ((x+5-1)<<14) //# of blocks sent during default read mode
#define EM4x05_GET_NUM_BLOCKS(x)        (((x>>14) & 0xF)-5+1)
#define EM4x05_READ_LOGIN_REQ           1<<18
#define EM4x05_READ_HK_LOGIN_REQ        1<<19
#define EM4x05_WRITE_LOGIN_REQ          1<<20
#define EM4x05_WRITE_HK_LOGIN_REQ       1<<21
#define EM4x05_READ_AFTER_WRITE         1<<22
#define EM4x05_DISABLE_ALLOWED          1<<23
#define EM4x05_READER_TALK_FIRST        1<<24


// FeliCa protocol
#define FELICA_POLL_REQ                 0x00
#define FELICA_POLL_ACK                 0x01

#define FELICA_REQSRV_REQ               0x02
#define FELICA_REQSRV_ACK               0x03

#define FELICA_REQRESP_REQ              0x04
#define FELICA_REQRESP_ACK              0x05

#define FELICA_RDBLK_REQ                0x06
#define FELICA_RDBLK_ACK                0x07

#define FELICA_WRTBLK_REQ               0x08
#define FELICA_WRTBLK_ACK               0x09

#define FELICA_SRCHSYSCODE_REQ          0x0a
#define FELICA_SRCHSYSCODE_ACK          0x0b

#define FELICA_REQSYSCODE_REQ           0x0c
#define FELICA_REQSYSCODE_ACK           0x0d

#define FELICA_AUTH1_REQ                0x10
#define FELICA_AUTH1_ACK                0x11

#define FELICA_AUTH2_REQ                0x12
#define FELICA_AUTH2_ACK                0x13

#define FELICA_RDSEC_REQ                0x14
#define FELICA_RDSEC_ACK                0x15

#define FELICA_WRTSEC_REQ               0x16
#define FELICA_WRTSEC_ACK               0x17

#define FELICA_REQSRV2_REQ              0x32
#define FELICA_REQSRV2_ACK              0x33

#define FELICA_GETSTATUS_REQ            0x38
#define FELICA_GETSTATUS_ACK            0x39

#define FELICA_OSVER_REQ                0x3c
#define FELICA_OSVER_ACK                0x3d

#define FELICA_RESET_MODE_REQ           0x3e
#define FELICA_RESET_MODE_ACK           0x3f

#define FELICA_AUTH1V2_REQ              0x40
#define FELICA_AUTH1V2_ACK              0x41

#define FELICA_AUTH2V2_REQ              0x42
#define FELICA_AUTH2V2_ACK              0x43

#define FELICA_RDSECV2_REQ              0x44
#define FELICA_RDSECV2_ACK              0x45
#define FELICA_WRTSECV2_REQ             0x46
#define FELICA_WRTSECV2_ACK             0x47

#define FELICA_UPDATE_RNDID_REQ         0x4C
#define FELICA_UPDATE_RNDID_ACK         0x4D

// FeliCa SYSTEM list
#define SYSTEMCODE_ANY                  0xffff // ANY
#define SYSTEMCODE_FELICA_LITE          0x88b4 // FeliCa Lite
#define SYSTEMCODE_COMMON               0xfe00 // Common
#define SYSTEMCODE_EDY                  0xfe00 // Edy
#define SYSTEMCODE_CYBERNE              0x0003 // Cyberne
#define SYSTEMCODE_SUICA                0x0003 // Suica
#define SYSTEMCODE_PASMO                0x0003 // Pasmo

//FeliCa Service list Suica/pasmo (little endian)
#define SERVICE_SUICA_INOUT             0x108f // SUICA/PASMO
#define SERVICE_SUICA_HISTORY           0x090f // SUICA/PASMO
#define SERVICE_FELICA_LITE_READONLY    0x0b00 // FeliCa Lite RO
#define SERVICE_FELICA_LITE_READWRITE   0x0900 // FeliCa Lite RW

// Calypso protocol
#define CALYPSO_GET_RESPONSE            0xC0
#define CALYPSO_SELECT                  0xA4
#define CALYPSO_INVALIDATE              0x04
#define CALYPSO_REHABILITATE            0x44
#define CALYPSO_APPEND_RECORD           0xE2
#define CALYPSO_DECREASE                0x30
#define CALYPSO_INCREASE                0x32
#define CALYPSO_READ_BINARY             0xB0
#define CALYPSO_READ_RECORD             0xB2
#define CALYPSO_UPDATE_BINARY           0xD6
#define CALYPSO_UPDATE_RECORD           0xDC
#define CALYPSO_WRITE_RECORD            0xD2
#define CALYPSO_OPEN_SESSION            0x8A
#define CALYPSO_CLOSE_SESSION           0x8E
#define CALYPSO_GET_CHALLENGE           0x84
#define CALYPSO_CHANGE_PIN              0xD8
#define CALYPSO_VERIFY_PIN              0x20
#define CALYPSO_SV_GET                  0x7C
#define CALYPSO_SV_DEBIT                0xBA
#define CALYPSO_SV_RELOAD               0xB8
#define CALYPSO_SV_UN_DEBIT             0xBC
#define CALYPSO_SAM_SV_DEBIT            0x54
#define CALYPSO_SAM_SV_RELOAD           0x56

// HITAG1 commands
#define HITAG1_SET_CCNEW                0xC2    // left 5 bits only
#define HITAG1_READ_ID                  0x00    // not a real command, consists of 5 bits length, <length> bits partial SN, 8 bits CRC
#define HITAG1_SELECT                   0x00    // left 5 bits only, followed by 32 bits SN and 8 bits CRC
#define HITAG1_WRPPAGE                  0x80    // left 4 bits only, followed by 8 bits page and 8 bits CRC
#define HITAG1_WRPBLK                   0x90    // left 4 bits only, followed by 8 bits block and 8 bits CRC
#define HITAG1_WRCPAGE                  0xA0    // left 4 bits only, followed by 8 bits page or key information and 8 bits CRC
#define HITAG1_WRCBLK                   0xB0    // left 4 bits only, followed by 8 bits block and 8 bits CRC
#define HITAG1_RDPPAGE                  0xC0    // left 4 bits only, followed by 8 bits page and 8 bits CRC
#define HITAG1_RDPBLK                   0xD0    // left 4 bits only, followed by 8 bits block and 8 bits CRC
#define HITAG1_RDCPAGE                  0xE0    // left 4 bits only, followed by 8 bits page and 8 bits CRC
#define HITAG1_RDCBLK                   0xF0    // left 4 bits only, followed by 8 bits block and 8 bits CRC
#define HITAG1_HALT                     0x70    // left 4 bits only, followed by 8 bits (dummy) page and 8 bits CRC

// HITAG2 commands
#define HITAG2_START_AUTH               0x3    // left 5 bits only
#define HITAG2_HALT                     0x0    // left 5 bits only

#define HITAG2_READ_PAGE                0x3    // page number in bits 5 to 3, page number inverted in bit 0 and following 2 bits
#define HITAG2_READ_PAGE_INVERTED       0x1    // page number in bits 5 to 3, page number inverted in bit 0 and following 2 bits
#define HITAG2_WRITE_PAGE               0x2   // page number in bits 5 to 3, page number


// HITAG S commands
#define HITAGS_QUIET                    0x70
//inverted in bit 0 and following 2 bits
#define HITAGS_WRITE_BLOCK              0x90

// LTO-CM commands
#define LTO_REQ_STANDARD                0x45
#define LTO_REQ_ALL                     0x4A
#define LTO_READWORD                    0x40   // read 2 bytes (word)
#define LTO_READBLOCK                   0x30
#define LTO_READBLOCK_CONT              0x80
#define LTO_SELECT                      0x93
#define LTO_WRITEWORD                   0xB0   // write 2 bytes (word)
#define LTO_WRITEBLOCK                  0xA0
#define LTO_HALT                        0x50
#define LTO_TEST_CMD_1                  0x0E
#define LTO_TEST_CMD_2                  0x6C

// 0x0A = ACK
// 0x05 = NACK

#endif
// PROTOCOLS_H