proxmark3/common_arm/usb_cdc.c

1024 lines
37 KiB
C
Raw Normal View History

2022-01-07 08:58:03 +08:00
//-----------------------------------------------------------------------------
// Copyright (C) Proxmark3 contributors. See AUTHORS.md for details.
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// See LICENSE.txt for the text of the license.
//-----------------------------------------------------------------------------
// at91sam7s USB CDC device implementation
// based on the "Basic USB Example" from ATMEL (doc6123.pdf)
//-----------------------------------------------------------------------------
#include "usb_cdc.h"
#include "proxmark3_arm.h"
#include "usart_defs.h"
/*
AT91SAM7S256 USB Device Port
Embedded 328-byte dual-port RAM for endpoints
Four endpoints
Endpoint 0: 8 bytes
Endpoint 1 and 2: 64 bytes ping-pong
Endpoint 3: 64 bytes
Ping-pong Mode (two memory banks) for bulk endpoints
*/
//
#define AT91C_EP_CONTROL 0
#define AT91C_EP_OUT 1 // cfg bulk out
#define AT91C_EP_IN 2 // cfg bulk in
#define AT91C_EP_NOTIFY 3 // cfg cdc notification interrup
#define AT91C_EP_CONTROL_SIZE 8
#define AT91C_EP_OUT_SIZE 64
#define AT91C_EP_IN_SIZE 64
// Section: USB Descriptors
#define USB_DESCRIPTOR_DEVICE 0x01 // DescriptorType for a Device Descriptor.
#define USB_DESCRIPTOR_CONFIGURATION 0x02 // DescriptorType for a Configuration Descriptor.
#define USB_DESCRIPTOR_STRING 0x03 // DescriptorType for a String Descriptor.
#define USB_DESCRIPTOR_INTERFACE 0x04 // DescriptorType for an Interface Descriptor.
#define USB_DESCRIPTOR_ENDPOINT 0x05 // DescriptorType for an Endpoint Descriptor.
#define USB_DESCRIPTOR_DEVICE_QUALIFIER 0x06 // DescriptorType for a Device Qualifier.
#define USB_DESCRIPTOR_OTHER_SPEED 0x07 // DescriptorType for a Other Speed Configuration.
#define USB_DESCRIPTOR_INTERFACE_POWER 0x08 // DescriptorType for Interface Power.
#define USB_DESCRIPTOR_OTG 0x09 // DescriptorType for an OTG Descriptor.
2019-03-10 02:19:50 +08:00
#define USB_DESCRIPTOR_IAD 0x0B // DescriptorType for a Interface Association Descriptor
#define USB_DESCRIPTOR_TYPE_BO 0x0F // DescriptorType for a BOS Descriptor.
/* Configuration Attributes */
#define _DEFAULT (0x01<<7) //Default Value (Bit 7 is set)
#define _SELF (0x01<<6) //Self-powered (Supports if set)
#define _RWU (0x01<<5) //Remote Wakeup (Supports if set)
2019-03-10 02:19:50 +08:00
#define _HNP (0x01 << 1) //HNP (Supports if set)
#define _SRP (0x01) //SRP (Supports if set)
/* Endpoint Transfer Type */
#define _CTRL 0x00 //Control Transfer
#define _ISO 0x01 //Isochronous Transfer
2019-03-10 02:19:50 +08:00
#define _BULK 0x02 //Bulk Transfer
#define _INTERRUPT 0x03 //Interrupt Transfer
// (bit7 | 0 = OUT, 1 = IN)
#define _EP_IN 0x80
#define _EP_OUT 0x00
#define _EP01_OUT 0x01
#define _EP01_IN 0x81
#define _EP02_OUT 0x02
#define _EP02_IN 0x82
#define _EP03_OUT 0x03
#define _EP03_IN 0x83
/* WCID specific Request Code */
2019-03-10 02:19:50 +08:00
#define MS_OS_DESCRIPTOR_INDEX 0xEE
#define MS_VENDOR_CODE 0x1C
#define MS_EXTENDED_COMPAT_ID 0x04
#define MS_EXTENDED_PROPERTIES 0x05
2019-03-10 02:19:50 +08:00
#define MS_WCID_GET_DESCRIPTOR 0xC0
#define MS_WCID_GET_FEATURE_DESCRIPTOR 0xC1
/* USB standard request code */
#define STD_GET_STATUS_ZERO 0x0080
#define STD_GET_STATUS_INTERFACE 0x0081
#define STD_GET_STATUS_ENDPOINT 0x0082
#define STD_CLEAR_FEATURE_ZERO 0x0100
#define STD_CLEAR_FEATURE_INTERFACE 0x0101
#define STD_CLEAR_FEATURE_ENDPOINT 0x0102
#define STD_SET_FEATURE_ZERO 0x0300
#define STD_SET_FEATURE_INTERFACE 0x0301
#define STD_SET_FEATURE_ENDPOINT 0x0302
#define STD_SET_ADDRESS 0x0500
#define STD_GET_DESCRIPTOR 0x0680
#define STD_SET_DESCRIPTOR 0x0700
#define STD_GET_CONFIGURATION 0x0880
#define STD_SET_CONFIGURATION 0x0900
#define STD_GET_INTERFACE 0x0A81
#define STD_SET_INTERFACE 0x0B01
#define STD_SYNCH_FRAME 0x0C82
/* CDC Class Specific Request Code */
#define GET_LINE_CODING 0x21A1
#define SET_LINE_CODING 0x2021
#define SET_CONTROL_LINE_STATE 0x2221
2021-08-22 05:14:54 +08:00
static AT91PS_UDP pUdp = AT91C_BASE_UDP;
static uint8_t btConfiguration = 0;
static uint8_t btConnection = 0;
static uint8_t btReceiveBank = AT91C_UDP_RX_DATA_BK0;
static const char devDescriptor[] = {
2019-03-10 02:19:50 +08:00
/* Device descriptor */
0x12, // Length
USB_DESCRIPTOR_DEVICE, // Descriptor Type (DEVICE)
2019-03-10 07:00:59 +08:00
0x00, 0x02, // Complies with USB Spec. Release (0200h = release 2.00) 0210 == release 2.10
2019-03-10 02:19:50 +08:00
2, // Device Class: Communication Device Class
0, // Device Subclass: CDC class sub code ACM [ice 0x02 = win10 virtual comport ]
0, // Device Protocol: CDC Device protocol (unused)
AT91C_EP_CONTROL_SIZE, // MaxPacketSize0
2019-03-10 07:00:59 +08:00
0xc4, 0x9a, // Vendor ID [0x9ac4 = J. Westhues]
0x8f, 0x4b, // Product ID [0x4b8f = Proxmark-3 RFID Instrument]
0x00, 0x01, // BCD Device release number (1.00)
2019-03-10 02:19:50 +08:00
1, // index Manufacturer
2, // index Product
3, // index SerialNumber
1 // Number of Configs
};
static const char cfgDescriptor[] = {
2019-03-10 02:19:50 +08:00
/* Configuration 1 descriptor */
// -----------------------------
9, // Length
USB_DESCRIPTOR_CONFIGURATION, // Descriptor Type
2019-03-10 07:00:59 +08:00
(9 + 9 + 5 + 5 + 4 + 5 + 7 + 9 + 7 + 7), 0, // Total Length 2 EP + Control
2019-03-10 02:19:50 +08:00
2, // Number of Interfaces
1, // Index value of this Configuration (used in SetConfiguration from Host)
0, // Configuration string index
_DEFAULT, // Attributes 0xA0
0xFA, // Max Power consumption
// IAD to associate the one CDC interface
// --------------------------------------
2019-03-10 07:00:59 +08:00
/*
8, // Length
USB_DESCRIPTOR_IAD, // IAD_DESCRIPTOR (0x0B)
0, // CDC_INT_INTERFACE NUMBER (
2, // IAD INTERFACE COUNT (two interfaces)
2, // Function Class: CDC_CLASS
2, // Function SubClass: ACM
1, // Function Protocol: v.25term
0, // iInterface
*/
2019-03-10 02:19:50 +08:00
/* Interface 0 Descriptor */
/* CDC Communication Class Interface Descriptor Requirement for Notification*/
// -----------------------------------------------------------
9, // Length
USB_DESCRIPTOR_INTERFACE, // Descriptor Type
0, // Interface Number
0, // Alternate Setting
1, // Number of Endpoints in this interface
2, // Interface Class code (Communication Interface Class)
2, // Interface Subclass code (Abstract Control Model)
1, // InterfaceProtocol (Common AT Commands, V.25term)
0, // iInterface
/* Header Functional Descriptor */
5, // Function Length
0x24, // Descriptor type: CS_INTERFACE
0, // Descriptor subtype: Header Functional Descriptor
2019-03-10 07:00:59 +08:00
0x10, 0x01, // bcd CDC:1.1
2019-03-10 02:19:50 +08:00
/* ACM Functional Descriptor */
4, // Function Length
0x24, // Descriptor Type: CS_INTERFACE
2, // Descriptor Subtype: Abstract Control Management Functional Descriptor
2, // Capabilities D1, Device supports the request combination of Set_Line_Coding, Set_Control_Line_State, Get_Line_Coding, and the notification Serial_State
/* Union Functional Descriptor */
5, // Function Length
0x24, // Descriptor Type: CS_INTERFACE
6, // Descriptor Subtype: Union Functional Descriptor
0, // MasterInterface: Communication Class Interface
1, // SlaveInterface0: Data Class Interface
/* Call Management Functional Descriptor */
5, // Function Length
0x24, // Descriptor Type: CS_INTERFACE
1, // Descriptor Subtype: Call Management Functional Descriptor
0, // Capabilities: Device sends/receives call management information only over the Communication Class interface. Device does not handle call management itself
1, // Data Interface: Data Class Interface
/* Protocol Functional Descriptor */
/*
6,
0x24, // Descriptor Type: CS_INTERFACE
0x0B, // Descriptor Subtype: Protocol Unit functional Descriptor
0xDD, // constant uniq ID of unit
0xFE, // protocol
*/
/* CDC Notification Endpoint descriptor */
// ---------------------------------------
7, // Length
USB_DESCRIPTOR_ENDPOINT, // Descriptor Type
_EP03_IN, // EndpointAddress: Endpoint 03 - IN
_INTERRUPT, // Attributes
AT91C_EP_CONTROL_SIZE, 0x00, // MaxPacket Size: EP0 - 8
0xFF, // Interval polling
/* Interface 1 Descriptor */
/* CDC Data Class Interface 1 Descriptor Requirement */
9, // Length
USB_DESCRIPTOR_INTERFACE, // Descriptor Type
1, // Interface Number
0, // Alternate Setting
2, // Number of Endpoints
0x0A, // Interface Class: CDC Data interface class
0, // Interface Subclass: not used
0, // Interface Protocol: No class specific protocol required (usb spec)
0, // Interface
/* Endpoint descriptor */
7, // Length
USB_DESCRIPTOR_ENDPOINT, // Descriptor Type
_EP01_OUT, // Endpoint Address: Endpoint 01 - OUT
_BULK, // Attributes: BULK
AT91C_EP_OUT_SIZE, 0x00, // MaxPacket Size: 64 bytes
0, // Interval: ignored for bulk
/* Endpoint descriptor */
7, // Length
USB_DESCRIPTOR_ENDPOINT, // Descriptor Type
_EP02_IN, // Endpoint Address: Endpoint 02 - IN
_BULK, // Attribute: BULK
AT91C_EP_IN_SIZE, 0x00, // MaxPacket Size: 64 bytes
0 // Interval: ignored for bulk
};
// BOS descriptor
static const char bosDescriptor[] = {
2019-03-10 07:00:59 +08:00
0x5,
USB_DESCRIPTOR_TYPE_BO,
0xC,
0x0,
0x1, // 1 device capability
0x7,
0x10, // USB_DEVICE_CAPABITY_TYPE,
0x2,
0x2, // LPM capability bit set
0x0,
0x0,
0x0
};
// Microsoft OS Extended Configuration Compatible ID Descriptor
/*
static const char CompatIDFeatureDescriptor[] = {
2019-03-10 02:19:50 +08:00
0x28, 0x00, 0x00, 0x00, // Descriptor Length 40bytes (0x28)
0x00, 0x01, // Version ('1.0')
MS_EXTENDED_COMPAT_ID, 0x00, // Compatibility ID Descriptor Index 0x0004
0x01, // Number of sections. 0x1
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Reserved (7bytes)
// -----function section 1------
2019-03-10 02:19:50 +08:00
0x00, // Interface Number #0
0x01, // reserved (0x1)
0x57, 0x49, 0x4E, 0x55, 0x53, 0x42, 0x00, 0x00, // Compatible ID ('WINUSB\0\0') (8bytes)
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Sub-Compatible ID (8byte)
0x00, 0x00, 0x00, 0x00, 0x00, 0x00 // Reserved (6bytes)
};
*/
// Microsoft Extended Properties Feature Descriptor
/*
static const char OSprop[] = {
2019-03-10 02:19:50 +08:00
// u32 Descriptor Length (10+132+64+102 == 308
0x34, 0x01, 0, 0,
// u16 Version ('1.0')
0, 1,
// u16 wIndex
MS_EXTENDED_PROPERTIES, 0,
// u16 wCount -- three section
3, 0,
// -----property section 1------
2019-03-10 02:19:50 +08:00
// u32 size ( 14+40+78 == 132)
132, 0, 0, 0,
// u32 type
1, 0, 0, 0, // unicode string
// u16 namelen (20*2 = 40)
40, 0,
// name DeviceInterfaceGUID
'D',0,'e',0,'v',0,'i',0,'c',0,'e',0,'I',0,'n',0,'t',0,'e',0,'r',0,'f',0,'a',0,'c',0,'e',0,'G',0,'U',0,'I',0,'D',0,0,0,
// u32 datalen (39*2 = 78)
78, 0, 0, 0,
// data {4D36E978-E325-11CE-BFC1-08002BE10318}
'{',0,'4',0,'d',0,'3',0,'6',0,'e',0,'9',0,'7',0,'8',0,'-',0,'e',0,'3',0,'2',0,'5',0,
'-',0,'1',0,'1',0,'c',0,'e',0,'-',0,'b',0,'f',0,'c',0,'1',0,'-',0,'0',0,'8',0,'0',0,
'0',0,'2',0,'b',0,'e',0,'1',0,'0',0,'3',0,'1',0,'8',0,'}',0,0,0,
// -----property section 2------
2019-03-10 02:19:50 +08:00
// u32 size ( 14+12+38 == 64)
64, 0, 0, 0,
// u32 type
1, 0, 0, 0, // unicode string
// u16 namelen (12)
12, 0,
// name Label
'L',0,'a',0,'b',0,'e',0,'l',0,0,0,
// u32 datalen ( 19*2 = 38 )
38, 0, 0, 0,
// data 'Awesome PM3 Device'
'A',0,'w',0,'e',0,'s',0,'o',0,'m',0,'e',0,' ',0,'P',0,'M',0,'3',0,' ',0,'D',0,'e',0,'v',0,'i',0,'c',0,'e',0,0,0,
// -----property section 3------
2019-03-10 02:19:50 +08:00
// u32 size ( 14+12+76 == 102)
102, 0, 0, 0,
// u32 type
2, 0, 0, 0, //Unicode string with environment variables
// u16 namelen (12)
12, 0,
// name Icons
'I',0,'c',0,'o',0,'n',0,'s',0,0,0,
// u32 datalen ( 38*2 == 76)
76, 0, 0, 0,
// data '%SystemRoot%\\system32\\Shell32.dll,-13'
'%',0,'S',0,'y',0,'s',0,'t',0,'e',0,'m',0,'R',0,'o',0,'o',0,'t',0,'%',0,
'\\',0,'s',0,'y',0,'s',0,'t',0,'e',0,'m',0,'3',0,'2',0,'\\',0,
'S',0,'h',0,'e',0,'l',0,'l',0,'3',0,'2',0,'.',0,'d',0,'l',0,'l',0,',',0,
'-',0,'1',0,'3',0,0,0
};
*/
static const char StrLanguageCodes[] = {
2019-03-10 02:19:50 +08:00
4, // Length
0x03, // Type is string
0x09, 0x04 // supported language Code 0 = 0x0409 (English)
};
// Note: ModemManager (Linux) ignores Proxmark3 devices by matching the
// manufacturer string "proxmark.org". Don't change this.
// or use the blacklisting file.
static const char StrManufacturer[] = {
2019-03-10 02:19:50 +08:00
26, // Length
0x03, // Type is string
2019-03-10 07:00:59 +08:00
'p', 0, 'r', 0, 'o', 0, 'x', 0, 'm', 0, 'a', 0, 'r', 0, 'k', 0, '.', 0, 'o', 0, 'r', 0, 'g', 0,
};
static const char StrProduct[] = {
2019-03-10 02:19:50 +08:00
20, // Length
0x03, // Type is string
2019-03-10 07:00:59 +08:00
'p', 0, 'r', 0, 'o', 0, 'x', 0, 'm', 0, 'a', 0, 'r', 0, 'k', 0, '3', 0
};
static const char StrSerialNumber[] = {
2019-03-10 02:19:50 +08:00
14, // Length
0x03, // Type is string
2019-03-10 07:00:59 +08:00
'i', 0, 'c', 0, 'e', 0, 'm', 0, 'a', 0, 'n', 0
};
// size includes their own field.
static const char StrMS_OSDescriptor[] = {
2019-03-10 02:19:50 +08:00
18, // length 0x12
0x03, // Type is string
2019-03-10 07:00:59 +08:00
'M', 0, 'S', 0, 'F', 0, 'T', 0, '1', 0, '0', 0, '0', 0, MS_VENDOR_CODE, 0
};
static const char *getStringDescriptor(uint8_t idx) {
2019-03-10 07:00:59 +08:00
switch (idx) {
case 0:
return StrLanguageCodes;
case 1:
return StrManufacturer;
case 2:
return StrProduct;
case 3:
return StrSerialNumber;
case MS_OS_DESCRIPTOR_INDEX:
return StrMS_OSDescriptor;
2019-03-10 02:19:50 +08:00
default:
2019-03-10 07:00:59 +08:00
return (NULL);
2019-03-10 02:19:50 +08:00
}
}
// Bitmap for all status bits in CSR which must be written as 1 to cause no effect
#define REG_NO_EFFECT_1_ALL AT91C_UDP_RX_DATA_BK0 | AT91C_UDP_RX_DATA_BK1 \
2019-03-10 07:00:59 +08:00
|AT91C_UDP_STALLSENT | AT91C_UDP_RXSETUP \
|AT91C_UDP_TXCOMP
// Clear flags in the UDP_CSR register and waits for synchronization
#define UDP_CLEAR_EP_FLAGS(endpoint, flags) { \
2019-03-10 07:00:59 +08:00
volatile unsigned int reg; \
reg = pUdp->UDP_CSR[(endpoint)]; \
reg |= REG_NO_EFFECT_1_ALL; \
reg &= ~(flags); \
pUdp->UDP_CSR[(endpoint)] = reg; \
2019-04-29 04:51:40 +08:00
}
// reset flags in the UDP_CSR register and waits for synchronization
#define UDP_SET_EP_FLAGS(endpoint, flags) { \
2019-03-10 07:00:59 +08:00
volatile unsigned int reg; \
reg = pUdp->UDP_CSR[(endpoint)]; \
reg |= REG_NO_EFFECT_1_ALL; \
reg |= (flags); \
pUdp->UDP_CSR[(endpoint)] = reg; \
2019-04-29 04:51:40 +08:00
}
typedef struct {
2019-03-10 02:19:50 +08:00
uint32_t BitRate;
uint8_t Format;
uint8_t ParityType;
uint8_t DataBits;
} AT91S_CDC_LINE_CODING, *AT91PS_CDC_LINE_CODING;
2021-08-22 05:14:54 +08:00
static AT91S_CDC_LINE_CODING line = { // purely informative, actual values don't matter
2019-04-29 04:51:40 +08:00
USART_BAUD_RATE, // baudrate
0, // 1 Stop Bit
0, // None Parity
8 // 8 Data bits
};
2019-08-06 19:51:10 +08:00
// timer counts in 21.3us increments (1024/48MHz), rounding applies
// WARNING: timer can't measure more than 1.39s (21.3us * 0xffff)
static void SpinDelayUs(int us) {
int ticks = ((MCK / 1000000) * us + 512) >> 10;
2019-03-10 02:19:50 +08:00
// Borrow a PWM unit for my real-time clock
AT91C_BASE_PWMC->PWMC_ENA = PWM_CHANNEL(0);
2019-03-10 02:19:50 +08:00
// 48 MHz / 1024 gives 46.875 kHz
AT91C_BASE_PWMC_CH0->PWMC_CMR = PWM_CH_MODE_PRESCALER(10); // Channel Mode Register
AT91C_BASE_PWMC_CH0->PWMC_CDTYR = 0; // Channel Duty Cycle Register
AT91C_BASE_PWMC_CH0->PWMC_CPRDR = 0xffff; // Channel Period Register
2019-03-10 02:19:50 +08:00
uint16_t start = AT91C_BASE_PWMC_CH0->PWMC_CCNTR;
2019-03-10 07:00:59 +08:00
for (;;) {
2019-03-10 02:19:50 +08:00
uint16_t now = AT91C_BASE_PWMC_CH0->PWMC_CCNTR;
if (now == (uint16_t)(start + ticks))
return;
2019-03-10 02:19:50 +08:00
WDT_HIT();
}
}
/*
*----------------------------------------------------------------------------
* \fn usb_disable
* \brief This function deactivates the USB device
*----------------------------------------------------------------------------
*/
2020-05-11 00:34:35 +08:00
void usb_disable(void) {
2019-03-10 02:19:50 +08:00
// Disconnect the USB device
AT91C_BASE_PIOA->PIO_ODR = GPIO_USB_PU;
2019-03-10 02:19:50 +08:00
// Clear all lingering interrupts
if (pUdp->UDP_ISR & AT91C_UDP_ENDBUSRES) {
pUdp->UDP_ICR = AT91C_UDP_ENDBUSRES;
}
}
/*
*----------------------------------------------------------------------------
* \fn usb_enable
* \brief This function Activates the USB device
*----------------------------------------------------------------------------
*/
2020-05-11 00:34:35 +08:00
void usb_enable(void) {
2019-03-10 02:19:50 +08:00
// Set the PLL USB Divider
AT91C_BASE_CKGR->CKGR_PLLR |= AT91C_CKGR_USBDIV_1 ;
2019-03-10 02:19:50 +08:00
// Specific Chip USB Initialisation
// Enables the 48MHz USB clock UDPCK and System Peripheral USB Clock
AT91C_BASE_PMC->PMC_SCER |= AT91C_PMC_UDP;
AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_UDP);
2019-03-10 02:19:50 +08:00
AT91C_BASE_UDP->UDP_FADDR = 0;
AT91C_BASE_UDP->UDP_GLBSTATE = 0;
2019-03-10 02:19:50 +08:00
// Enable UDP PullUp (USB_DP_PUP) : enable & Clear of the corresponding PIO
// Set in PIO mode and Configure in Output
AT91C_BASE_PIOA->PIO_PER = GPIO_USB_PU; // Set in PIO mode
AT91C_BASE_PIOA->PIO_OER = GPIO_USB_PU; // Configure as Output
2019-03-10 02:19:50 +08:00
// Clear for set the Pullup resistor
AT91C_BASE_PIOA->PIO_CODR = GPIO_USB_PU;
2019-03-10 02:19:50 +08:00
// Disconnect and reconnect USB controller for 100ms
usb_disable();
SpinDelayUs(100 * 1000);
2019-03-10 02:19:50 +08:00
// Wait for a short while
//for (volatile size_t i=0; i<0x100000; i++) {};
2019-03-10 02:19:50 +08:00
// Reconnect USB reconnect
AT91C_BASE_PIOA->PIO_SODR = GPIO_USB_PU;
AT91C_BASE_PIOA->PIO_OER = GPIO_USB_PU;
}
/*
*----------------------------------------------------------------------------
* \fn usb_check
* \brief Test if the device is configured and handle enumeration
*----------------------------------------------------------------------------
*/
static int usb_reconnect = 0;
static int usb_configured = 0;
void SetUSBreconnect(int value) {
2019-03-10 02:19:50 +08:00
usb_reconnect = value;
}
int GetUSBreconnect(void) {
2019-03-10 02:19:50 +08:00
return usb_reconnect;
}
void SetUSBconfigured(int value) {
2019-03-10 02:19:50 +08:00
usb_configured = value;
}
int GetUSBconfigured(void) {
2019-03-10 02:19:50 +08:00
return usb_configured;
}
2020-05-11 00:34:35 +08:00
bool usb_check(void) {
2019-03-10 02:19:50 +08:00
/*
// reconnected ONCE and
if ( !USB_ATTACHED() ){
usb_reconnect = 1;
return false;
}
// only one time after USB been disengaged and re-engaged
if ( USB_ATTACHED() && usb_reconnect == 1 ) {
if ( usb_configured == 0) {
usb_disable();
usb_enable();
AT91F_CDC_Enumerate();
usb_configured = 1;
return false;
}
}
*/
// interrupt status register
AT91_REG isr = pUdp->UDP_ISR;
// end of bus reset
if (isr & AT91C_UDP_ENDBUSRES) {
pUdp->UDP_ICR = AT91C_UDP_ENDBUSRES;
// reset all endpoints
2020-01-01 05:19:54 +08:00
pUdp->UDP_RSTEP = (unsigned int) - 1;
2019-03-10 02:19:50 +08:00
pUdp->UDP_RSTEP = 0;
// Enable the function
pUdp->UDP_FADDR = AT91C_UDP_FEN;
// Configure endpoint 0 (enable control endpoint)
pUdp->UDP_CSR[AT91C_EP_CONTROL] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_CTRL);
2019-03-10 07:00:59 +08:00
} else if (isr & AT91C_UDP_EPINT0) {
2019-03-10 02:19:50 +08:00
pUdp->UDP_ICR = AT91C_UDP_EPINT0;
AT91F_CDC_Enumerate();
}
/*
else if (isr & AT91C_UDP_EPINT3 ) {
pUdp->UDP_ICR = AT91C_UDP_EPINT3;
AT91F_CDC_Enumerate();
//pUdp->UDP_ICR |= AT91C_UDP_EPINT3;
}
*/
return (btConfiguration) ? true : false;
}
2020-05-11 00:34:35 +08:00
bool usb_poll(void) {
2019-03-10 02:19:50 +08:00
if (!usb_check()) return false;
return (pUdp->UDP_CSR[AT91C_EP_OUT] & btReceiveBank);
}
/**
2019-03-10 02:19:50 +08:00
In github PR #129, some users appears to get a false positive from
usb_poll, which returns true, but the usb_read operation
still returns 0.
This check is basically the same as above, but also checks
that the length available to read is non-zero, thus hopefully fixes the
bug.
**/
2020-05-11 00:34:35 +08:00
bool usb_poll_validate_length(void) {
2019-03-10 02:19:50 +08:00
if (!usb_check()) return false;
if (!(pUdp->UDP_CSR[AT91C_EP_OUT] & btReceiveBank)) return false;
return ((pUdp->UDP_CSR[AT91C_EP_OUT] & AT91C_UDP_RXBYTECNT) >> 16) > 0;
}
/*
*----------------------------------------------------------------------------
* \fn usb_read
* \brief Read available data from Endpoint 1 OUT (host to device)
*----------------------------------------------------------------------------
*/
2019-03-21 22:19:18 +08:00
uint32_t usb_read(uint8_t *data, size_t len) {
2019-03-10 07:00:59 +08:00
if (len == 0) return 0;
2019-03-10 02:19:50 +08:00
uint8_t bank = btReceiveBank;
uint32_t packetSize, nbBytesRcv = 0;
uint32_t time_out = 0;
2019-03-10 02:19:50 +08:00
while (len) {
if (!usb_check()) break;
2019-03-10 07:00:59 +08:00
if (pUdp->UDP_CSR[AT91C_EP_OUT] & bank) {
2019-03-10 02:19:50 +08:00
packetSize = (pUdp->UDP_CSR[AT91C_EP_OUT] & AT91C_UDP_RXBYTECNT) >> 16;
2019-03-10 07:00:59 +08:00
packetSize = MIN(packetSize, len);
2019-03-10 02:19:50 +08:00
len -= packetSize;
while (packetSize--)
data[nbBytesRcv++] = pUdp->UDP_FDR[AT91C_EP_OUT];
2019-03-10 02:19:50 +08:00
// flip bank
UDP_CLEAR_EP_FLAGS(AT91C_EP_OUT, bank)
2019-03-10 02:19:50 +08:00
if (bank == AT91C_UDP_RX_DATA_BK0)
bank = AT91C_UDP_RX_DATA_BK1;
else
bank = AT91C_UDP_RX_DATA_BK0;
}
if (time_out++ == 0x1fff) break;
}
2019-03-10 02:19:50 +08:00
btReceiveBank = bank;
return nbBytesRcv;
}
static uint8_t usb_read_ng_buffer[64];
2019-04-17 02:49:32 +08:00
static size_t usb_read_ng_bufoff = 0;
static size_t usb_read_ng_buflen = 0;
uint32_t usb_read_ng(uint8_t *data, size_t len) {
if (len == 0) return 0;
uint8_t bank = btReceiveBank;
uint32_t packetSize, nbBytesRcv = 0;
uint32_t time_out = 0;
// take first from local buffer
2019-04-17 02:49:32 +08:00
if (len <= usb_read_ng_buflen) {
for (uint32_t i = 0; i < len; i++)
data[nbBytesRcv++] = usb_read_ng_buffer[usb_read_ng_bufoff + i];
usb_read_ng_buflen -= len;
if (usb_read_ng_buflen == 0)
usb_read_ng_bufoff = 0;
else
usb_read_ng_bufoff += len;
return nbBytesRcv;
} else {
for (uint32_t i = 0; i < usb_read_ng_buflen; i++)
data[nbBytesRcv++] = usb_read_ng_buffer[usb_read_ng_bufoff + i];
len -= usb_read_ng_buflen;
usb_read_ng_buflen = 0;
usb_read_ng_bufoff = 0;
}
while (len) {
if (!usb_check()) break;
if ((pUdp->UDP_CSR[AT91C_EP_OUT] & bank)) {
uint32_t available = (pUdp->UDP_CSR[AT91C_EP_OUT] & AT91C_UDP_RXBYTECNT) >> 16;
packetSize = MIN(available, len);
available -= packetSize;
len -= packetSize;
while (packetSize--)
data[nbBytesRcv++] = pUdp->UDP_FDR[AT91C_EP_OUT];
// fill the local buffer with the remaining bytes
for (uint32_t i = 0; i < available; i++)
usb_read_ng_buffer[i] = pUdp->UDP_FDR[AT91C_EP_OUT];
usb_read_ng_buflen = available;
// flip bank
UDP_CLEAR_EP_FLAGS(AT91C_EP_OUT, bank)
if (bank == AT91C_UDP_RX_DATA_BK0)
bank = AT91C_UDP_RX_DATA_BK1;
else
bank = AT91C_UDP_RX_DATA_BK0;
}
if (time_out++ == 0x1fff) break;
}
btReceiveBank = bank;
return nbBytesRcv;
}
/*
*----------------------------------------------------------------------------
* \fn usb_write
* \brief Send through endpoint 2 (device to host)
*----------------------------------------------------------------------------
*/
int usb_write(const uint8_t *data, const size_t len) {
if (!len) return PM3_EINVARG;
if (!usb_check()) return PM3_EIO;
2019-03-10 02:19:50 +08:00
// can we write?
if ((pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXPKTRDY) != 0) return PM3_EIO;
2019-03-10 02:19:50 +08:00
size_t length = len;
uint32_t cpt = 0;
2019-03-10 02:19:50 +08:00
// send first chunk
cpt = MIN(length, AT91C_EP_IN_SIZE);
length -= cpt;
while (cpt--) {
pUdp->UDP_FDR[AT91C_EP_IN] = *data++;
}
2019-03-10 02:19:50 +08:00
UDP_SET_EP_FLAGS(AT91C_EP_IN, AT91C_UDP_TXPKTRDY);
while (pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXPKTRDY) {};
2019-03-10 02:19:50 +08:00
while (length) {
// Send next chunk
cpt = MIN(length, AT91C_EP_IN_SIZE);
length -= cpt;
while (cpt--) {
pUdp->UDP_FDR[AT91C_EP_IN] = *data++;
}
2019-03-10 02:19:50 +08:00
// Wait for previous chunk to be sent
// (iceman) when is the bankswapping done?
while (!(pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP)) {
if (!usb_check()) return PM3_EIO;
2019-03-10 02:19:50 +08:00
}
2019-03-10 02:19:50 +08:00
UDP_CLEAR_EP_FLAGS(AT91C_EP_IN, AT91C_UDP_TXCOMP);
2019-03-19 03:34:24 +08:00
while (pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP) {};
UDP_SET_EP_FLAGS(AT91C_EP_IN, AT91C_UDP_TXPKTRDY);
while (pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXPKTRDY) {};
2019-03-10 02:19:50 +08:00
}
2019-03-10 02:19:50 +08:00
// Wait for the end of transfer
while (!(pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP)) {
if (!usb_check()) return PM3_EIO;
2019-03-10 02:19:50 +08:00
}
2019-03-10 02:19:50 +08:00
UDP_CLEAR_EP_FLAGS(AT91C_EP_IN, AT91C_UDP_TXCOMP);
2019-03-19 03:34:24 +08:00
while (pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP) {};
if (len % AT91C_EP_IN_SIZE == 0) {
UDP_SET_EP_FLAGS(AT91C_EP_IN, AT91C_UDP_TXPKTRDY);
while (!(pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP)) {};
UDP_CLEAR_EP_FLAGS(AT91C_EP_IN, AT91C_UDP_TXCOMP);
while (pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP) {};
}
return PM3_SUCCESS;
}
/*
*----------------------------------------------------------------------------
* \fn AT91F_USB_SendData
* \brief Send Data through the control endpoint
*----------------------------------------------------------------------------
*/
void AT91F_USB_SendData(AT91PS_UDP pudp, const char *pData, uint32_t length) {
2019-03-10 02:19:50 +08:00
AT91_REG csr;
2019-03-10 02:19:50 +08:00
do {
2019-06-08 00:41:39 +08:00
uint32_t cpt = MIN(length, AT91C_EP_CONTROL_SIZE);
2019-03-10 02:19:50 +08:00
length -= cpt;
2019-03-10 02:19:50 +08:00
while (cpt--)
pudp->UDP_FDR[AT91C_EP_CONTROL] = *pData++;
if (pudp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP) {
2019-03-10 02:19:50 +08:00
UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_TXCOMP);
while (pudp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP);
2019-03-10 02:19:50 +08:00
}
2019-03-10 02:19:50 +08:00
UDP_SET_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_TXPKTRDY);
2019-03-10 02:19:50 +08:00
do {
csr = pudp->UDP_CSR[AT91C_EP_CONTROL];
2019-03-10 02:19:50 +08:00
// Data IN stage has been stopped by a status OUT
2019-03-10 07:00:59 +08:00
if (csr & AT91C_UDP_RX_DATA_BK0) {
2019-03-10 02:19:50 +08:00
UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_RX_DATA_BK0)
return;
}
2019-03-10 07:00:59 +08:00
} while (!(csr & AT91C_UDP_TXCOMP));
2019-03-10 02:19:50 +08:00
} while (length);
if (pudp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP) {
2019-03-10 02:19:50 +08:00
UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_TXCOMP);
while (pudp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP);
2019-03-10 02:19:50 +08:00
}
}
//*----------------------------------------------------------------------------
//* \fn AT91F_USB_SendZlp
//* \brief Send zero length packet through the control endpoint
//*----------------------------------------------------------------------------
void AT91F_USB_SendZlp(AT91PS_UDP pudp) {
2019-03-10 02:19:50 +08:00
UDP_SET_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_TXPKTRDY);
while (!(pudp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP)) {};
2019-03-10 02:19:50 +08:00
UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_TXCOMP);
while (pudp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP) {};
}
//*----------------------------------------------------------------------------
//* \fn AT91F_USB_SendStall
//* \brief Stall the control endpoint
//*----------------------------------------------------------------------------
void AT91F_USB_SendStall(AT91PS_UDP pudp) {
2019-03-10 02:19:50 +08:00
UDP_SET_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_FORCESTALL);
while (!(pudp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_ISOERROR)) {};
2019-03-10 07:00:59 +08:00
UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, (AT91C_UDP_FORCESTALL | AT91C_UDP_ISOERROR));
while (pudp->UDP_CSR[AT91C_EP_CONTROL] & (AT91C_UDP_FORCESTALL | AT91C_UDP_ISOERROR)) {};
}
//*----------------------------------------------------------------------------
//* \fn AT91F_CDC_Enumerate
//* \brief This function is a callback invoked when a SETUP packet is received
//* problem:
//* 1. this is for USB endpoint0. the control endpoint.
//* 2. mixed with CDC ACM endpoint3 , interrupt, control endpoint
//*----------------------------------------------------------------------------
2020-05-11 00:34:35 +08:00
void AT91F_CDC_Enumerate(void) {
2019-03-21 22:19:18 +08:00
uint8_t bmRequestType, bRequest;
2019-03-10 02:19:50 +08:00
uint16_t wValue, wIndex, wLength, wStatus;
2019-03-10 07:00:59 +08:00
if (!(pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_RXSETUP))
2019-03-10 02:19:50 +08:00
return;
bmRequestType = pUdp->UDP_FDR[AT91C_EP_CONTROL];
bRequest = pUdp->UDP_FDR[AT91C_EP_CONTROL];
wValue = (pUdp->UDP_FDR[AT91C_EP_CONTROL] & 0xFF);
wValue |= (pUdp->UDP_FDR[AT91C_EP_CONTROL] << 8);
wIndex = (pUdp->UDP_FDR[AT91C_EP_CONTROL] & 0xFF);
wIndex |= (pUdp->UDP_FDR[AT91C_EP_CONTROL] << 8);
wLength = (pUdp->UDP_FDR[AT91C_EP_CONTROL] & 0xFF);
wLength |= (pUdp->UDP_FDR[AT91C_EP_CONTROL] << 8);
if (bmRequestType & 0x80) { // Data Phase Transfer Direction Device to Host
UDP_SET_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_DIR);
2019-03-19 03:34:24 +08:00
while (!(pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_DIR)) {};
2019-03-10 02:19:50 +08:00
}
UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_RXSETUP);
2019-03-19 03:34:24 +08:00
while ((pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_RXSETUP)) {};
2019-03-10 02:19:50 +08:00
/*
if ( bRequest == MS_VENDOR_CODE) {
if ( bmRequestType == MS_WCID_GET_DESCRIPTOR ) { // C0
if ( wIndex == MS_EXTENDED_COMPAT_ID ) { // 4
//AT91F_USB_SendData(pUdp, CompatIDFeatureDescriptor, MIN(sizeof(CompatIDFeatureDescriptor), wLength));
//return;
}
}
if ( bmRequestType == MS_WCID_GET_FEATURE_DESCRIPTOR ) { //C1
// if ( wIndex == MS_EXTENDED_PROPERTIES ) { // 5 - winusb bug with wIndex == interface index, so I just send it always)
//AT91F_USB_SendData(pUdp, OSprop, MIN(sizeof(OSprop), wLength));
//return;
// }
}
}
*/
// Handle supported standard device request Cf Table 9-3 in USB specification Rev 1.1
switch ((bRequest << 8) | bmRequestType) {
2019-03-10 07:00:59 +08:00
case STD_GET_DESCRIPTOR: {
2019-03-10 02:19:50 +08:00
2019-03-10 07:00:59 +08:00
if (wValue == 0x100) // Return Device Descriptor
2019-03-10 02:19:50 +08:00
AT91F_USB_SendData(pUdp, devDescriptor, MIN(sizeof(devDescriptor), wLength));
2019-03-10 07:00:59 +08:00
else if (wValue == 0x200) // Return Configuration Descriptor
2019-03-10 02:19:50 +08:00
AT91F_USB_SendData(pUdp, cfgDescriptor, MIN(sizeof(cfgDescriptor), wLength));
2019-03-10 07:00:59 +08:00
else if ((wValue & 0xF00) == 0xF00) // Return BOS Descriptor
2019-03-10 02:19:50 +08:00
AT91F_USB_SendData(pUdp, bosDescriptor, MIN(sizeof(bosDescriptor), wLength));
2019-03-10 07:00:59 +08:00
else if ((wValue & 0x300) == 0x300) { // Return String Descriptor
2019-03-10 02:19:50 +08:00
const char *strDescriptor = getStringDescriptor(wValue & 0xff);
if (strDescriptor != NULL) {
AT91F_USB_SendData(pUdp, strDescriptor, MIN(strDescriptor[0], wLength));
} else {
AT91F_USB_SendStall(pUdp);
}
} else {
AT91F_USB_SendStall(pUdp);
}
}
break;
2019-03-10 07:00:59 +08:00
case STD_SET_ADDRESS:
AT91F_USB_SendZlp(pUdp);
pUdp->UDP_FADDR = (AT91C_UDP_FEN | (wValue & 0x7F));
pUdp->UDP_GLBSTATE = (wValue) ? AT91C_UDP_FADDEN : 0;
break;
case STD_SET_CONFIGURATION:
/*
* Set or clear the device "configured" state.
* The LSB of wValue is the "Configuration Number". If this value is non-zero,
* it should be the same number as defined in the Configuration Descriptor;
* otherwise an error must have occurred.
* This device has only one configuration and its Config Number is CONF_NB (= 1).
*/
AT91F_USB_SendZlp(pUdp);
btConfiguration = wValue;
pUdp->UDP_GLBSTATE = (wValue) ? AT91C_UDP_CONFG : AT91C_UDP_FADDEN;
// make sure we are not stalled
/*
UDP_CLEAR_EP_FLAGS(AT91C_EP_OUT , AT91C_UDP_FORCESTALL);
UDP_CLEAR_EP_FLAGS(AT91C_EP_IN , AT91C_UDP_FORCESTALL);
UDP_CLEAR_EP_FLAGS(AT91C_EP_NOTIFY, AT91C_UDP_FORCESTALL);
*/
// enable endpoints
pUdp->UDP_CSR[AT91C_EP_OUT] = (wValue) ? (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_OUT) : 0;
pUdp->UDP_CSR[AT91C_EP_IN] = (wValue) ? (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_IN) : 0;
pUdp->UDP_CSR[AT91C_EP_NOTIFY] = (wValue) ? (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_INT_IN) : 0;
break;
case STD_GET_CONFIGURATION:
AT91F_USB_SendData(pUdp, (char *) & (btConfiguration), sizeof(btConfiguration));
break;
case STD_GET_STATUS_ZERO:
wStatus = 0; // Device is Bus powered, remote wakeup disabled
2019-03-10 02:19:50 +08:00
AT91F_USB_SendData(pUdp, (char *) &wStatus, sizeof(wStatus));
2019-03-10 07:00:59 +08:00
break;
case STD_GET_STATUS_INTERFACE:
wStatus = 0; // reserved for future use
2019-03-10 02:19:50 +08:00
AT91F_USB_SendData(pUdp, (char *) &wStatus, sizeof(wStatus));
2019-03-10 07:00:59 +08:00
break;
case STD_GET_STATUS_ENDPOINT:
wStatus = 0;
wIndex &= 0x0F;
if ((pUdp->UDP_GLBSTATE & AT91C_UDP_CONFG) && (wIndex <= AT91C_EP_NOTIFY)) {
wStatus = (pUdp->UDP_CSR[wIndex] & AT91C_UDP_EPEDS) ? 0 : 1;
AT91F_USB_SendData(pUdp, (char *) &wStatus, sizeof(wStatus));
} else if ((pUdp->UDP_GLBSTATE & AT91C_UDP_FADDEN) && (wIndex == AT91C_EP_CONTROL)) {
wStatus = (pUdp->UDP_CSR[wIndex] & AT91C_UDP_EPEDS) ? 0 : 1;
AT91F_USB_SendData(pUdp, (char *) &wStatus, sizeof(wStatus));
} else {
AT91F_USB_SendStall(pUdp);
}
break;
case STD_SET_FEATURE_ZERO:
2019-03-10 02:19:50 +08:00
AT91F_USB_SendStall(pUdp);
2019-03-10 07:00:59 +08:00
break;
case STD_SET_FEATURE_INTERFACE:
2019-03-10 02:19:50 +08:00
AT91F_USB_SendZlp(pUdp);
2019-03-10 07:00:59 +08:00
break;
case STD_SET_FEATURE_ENDPOINT:
wIndex &= 0x0F;
if ((wValue == 0) && (wIndex >= AT91C_EP_OUT) && (wIndex <= AT91C_EP_NOTIFY)) {
pUdp->UDP_CSR[wIndex] = 0;
AT91F_USB_SendZlp(pUdp);
} else {
AT91F_USB_SendStall(pUdp);
}
break;
case STD_CLEAR_FEATURE_ZERO:
2019-03-10 02:19:50 +08:00
AT91F_USB_SendStall(pUdp);
2019-03-10 07:00:59 +08:00
break;
case STD_CLEAR_FEATURE_INTERFACE:
AT91F_USB_SendZlp(pUdp);
break;
case STD_CLEAR_FEATURE_ENDPOINT:
wIndex &= 0x0F;
if ((wValue == 0) && (wIndex >= AT91C_EP_OUT) && (wIndex <= AT91C_EP_NOTIFY)) {
2019-03-10 02:19:50 +08:00
2019-03-10 07:00:59 +08:00
if (wIndex == AT91C_EP_OUT) pUdp->UDP_CSR[AT91C_EP_OUT] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_OUT);
else if (wIndex == AT91C_EP_IN) pUdp->UDP_CSR[AT91C_EP_IN] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_IN);
else if (wIndex == AT91C_EP_NOTIFY) pUdp->UDP_CSR[AT91C_EP_NOTIFY] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_INT_IN);
2019-03-10 02:19:50 +08:00
2019-03-10 07:00:59 +08:00
AT91F_USB_SendZlp(pUdp);
} else {
AT91F_USB_SendStall(pUdp);
}
break;
// handle CDC class requests
case SET_LINE_CODING: {
/*
uint8_t i;
for ( i = 0 ; i < 7 ; i++ ) {
((uint8_t*)&line)[i] = pUdp->UDP_FDR[AT91C_EP_CONTROL];
} */
// ignore SET_LINE_CODING...
2019-03-19 03:34:24 +08:00
while (!(pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_RX_DATA_BK0)) {};
2019-03-10 07:00:59 +08:00
UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_RX_DATA_BK0);
2019-03-10 02:19:50 +08:00
AT91F_USB_SendZlp(pUdp);
2019-03-10 07:00:59 +08:00
break;
2019-03-10 02:19:50 +08:00
}
2019-03-10 07:00:59 +08:00
case GET_LINE_CODING:
AT91F_USB_SendData(pUdp, (char *) &line, MIN(sizeof(line), wLength));
break;
case SET_CONTROL_LINE_STATE:
btConnection = wValue;
AT91F_USB_SendZlp(pUdp);
break;
default:
AT91F_USB_SendStall(pUdp);
break;
2019-03-10 02:19:50 +08:00
}
2019-03-12 07:12:26 +08:00
}