2021-12-31 18:42:15 +08:00
< a id = "Top" > < / a >
# 2. Configuration and Verification
# Table of Contents
- [2. Configuration and Verification ](#2-configuration-and-verification )
- [Table of Contents ](#table-of-contents )
- [First things on your Proxmark3 RDV4 ](#first-things-on-your-proxmark3-rdv4 )
- [Verify sim module firmware version ](#verify-sim-module-firmware-version )
- [Next steps ](#next-steps )
2021-07-10 01:15:37 +08:00
### First things on your Proxmark3 RDV4
2021-12-31 18:42:15 +08:00
^[Top](#top)
2020-09-03 16:22:35 +08:00
2021-07-10 01:15:37 +08:00
You will need to run these commands to make sure your RDV4 is prepared
2019-05-06 01:53:58 +08:00
```
2020-09-03 16:22:35 +08:00
[usb] pm3 --> script run init_rdv4
```
The lua script actually executes the following commands below. These are here because of documentation, you can jump down to *Verify sim module firmware version* part.
```
2021-01-20 18:58:43 +08:00
[usb] pm3 --> mem load -f mfc_default_keys -m
[usb] pm3 --> mem load -f t55xx_default_pwds -t
[usb] pm3 --> mem load -f iclass_default_keys -i
2021-01-20 19:22:52 +08:00
[usb] pm3 --> lf t55xx deviceconfig --r0 -a 29 -b 17 -c 15 -d 47 -e 15 -p
[usb] pm3 --> lf t55xx deviceconfig --r1 -a 31 -b 20 -c 18 -d 50 -e 15 -p
[usb] pm3 --> lf t55xx deviceconfig --r2 -a 31 -b 20 -c 18 -d 40 -e 15 -p
[usb] pm3 --> lf t55xx deviceconfig --r3 -a 29 -b 17 -c 15 -d 31 -e 15 -f 47 -g 63 -p
2019-07-25 19:00:30 +08:00
Set all t55xx settings to defaults (will set all 4 at once)
2021-01-20 18:58:43 +08:00
[usb] pm3 --> lf t55xx deviceconfig -z -p
2019-05-06 01:53:58 +08:00
```
2019-04-08 06:38:00 +08:00
2020-09-03 16:22:35 +08:00
2019-04-08 06:38:00 +08:00
### Verify sim module firmware version
2021-12-31 18:42:15 +08:00
^[Top](#top)
2019-05-06 01:53:58 +08:00
2019-04-08 06:38:00 +08:00
To make sure you got the latest sim module firmware.
2019-05-06 01:53:58 +08:00
2022-12-06 05:32:40 +08:00
_Latest version is v4.12_
2019-04-08 06:38:00 +08:00
2019-05-06 01:53:58 +08:00
```
2020-05-22 04:28:55 +08:00
[usb] pm3 --> hw status
2019-05-06 01:53:58 +08:00
```
2019-04-08 06:38:00 +08:00
Find version in the long output, look for these two lines
2019-05-06 01:53:58 +08:00
```
#db# Smart card module (ISO 7816)
#db# version.................v2.06
2022-12-06 05:32:40 +08:00
or
#db# Smart card module (ISO 7816)
#db# version.................v3.11
2019-05-06 01:53:58 +08:00
```
2022-12-06 05:32:40 +08:00
These versions is obsolete.
2019-08-30 05:43:48 +08:00
2022-12-09 14:36:02 +08:00
If you didn't download sim013.bin from the RRG Repo be aware that it might be corrupted or faulty.
2019-08-30 05:43:48 +08:00
You find a hash text file in this folder. It was generated with the following linux command.
```
2022-12-09 14:36:02 +08:00
sha512sum -b sim013.bin > sim013.sha512.txt
2019-08-30 05:43:48 +08:00
```
2022-12-09 14:36:02 +08:00
You should validate the sim013.bin file against this hash file in order to be sure the file is not corrupted or faulty.
2019-08-30 05:43:48 +08:00
The following command upgrades your device sim module firmware.
2019-05-06 01:53:58 +08:00
Don't not turn off your device during the execution of this command!!
2019-08-30 05:43:48 +08:00
Even its a quite fast command you should be warned. You may brick it if you interrupt it.
2019-05-06 01:53:58 +08:00
```
2022-12-09 14:36:02 +08:00
[usb] pm3 --> smart upgrade -f /usr/local/share/proxmark3/firmware/sim013.bin
2019-09-04 04:54:42 +08:00
# or if from local repo
2022-12-09 14:36:02 +08:00
[usb] pm3 --> smart upgrade -f sim013.bin
2019-05-06 01:53:58 +08:00
```
You get the following output if the execution was successful:
```
2021-01-07 19:59:04 +08:00
[=] -------------------------------------------------------------------
[!] ⚠️ WARNING - sim module firmware upgrade
[!] ⚠️ A dangerous command, do wrong and you could brick the sim module
[=] -------------------------------------------------------------------
2022-12-09 14:36:02 +08:00
[=] firmware file sim013.bin
[=] Checking integrity sim013.sha512.txt
[+] loaded 866 bytes from binary file sim013.bin
[+] loaded 141 bytes from binary file sim013.sha512.txt
2021-01-07 19:59:04 +08:00
[=] Don't turn off your PM3!
[+] Sim module firmware uploading to PM3...
2022-12-06 05:32:40 +08:00
🕑 864 bytes sent
2021-01-07 19:59:04 +08:00
[+] Sim module firmware updating...
[#] FW 0000
[#] FW 0080
[#] FW 0100
[#] FW 0180
[#] FW 0200
[#] FW 0280
2022-12-06 05:32:40 +08:00
[#] FW 0300
2021-01-07 19:59:04 +08:00
[+] Sim module firmware upgrade successful
2019-05-06 01:53:58 +08:00
```
2019-08-30 05:43:48 +08:00
Run hw status command to verify that the upgrade went well.
```
2020-05-22 04:28:55 +08:00
[usb] pm3 --> hw status
2019-08-30 05:43:48 +08:00
```
2019-05-06 01:53:58 +08:00
## Next steps
2021-12-31 18:42:15 +08:00
^[Top](#top)
2019-05-06 01:53:58 +08:00
For the next steps, please read the following page:
2019-05-06 02:05:02 +08:00
* [Commands & Features ](/doc/md/Use_of_Proxmark/3_Commands-and-Features.md )
2019-05-06 01:53:58 +08:00
