|[What has changed?](#what-has-changed) | **[Setup and build for Linux](/doc/md/Installation_Instructions/Linux-Installation-Instructions.md)** | [Compilation Instructions](/doc/md/Use_of_Proxmark/0_Compilation-Instructions.md)|
|[Development](#development) | **[Important notes on ModemManager for Linux users](/doc/md/Installation_Instructions/ModemManager-Must-Be-Discarded.md)** | [Validating proxmark client functionality](/doc/md/Use_of_Proxmark/1_Validation.md) |
|[Why didn't you base it on official Proxmark3 Master?](#why-didnt-you-base-it-on-official-proxmark3-master)| **[Homebrew (Mac OS X) & Upgrading HomeBrew Tap Formula](/doc/md/Installation_Instructions/Mac-OS-X-Homebrew-Installation-Instructions.md)** | [First Use and Verification](/doc/md/Use_of_Proxmark/2_Configuration-and-Verification.md)|
|[Proxmark3 GUI](#proxmark3-gui)|**[Setup and build for Windows](/doc/md/Installation_Instructions/Windows-Installation-Instructions.md)**|[Commands & Features](/doc/md/Use_of_Proxmark/3_Commands-and-Features.md)|
|[Notes on external flash](/doc/ext_flash_notes.md)|[Notes on loclass](/doc/loclass_notes.md)|[Notes on Coverity Scan Config & Run](/doc/md/Development/Coverity-Scan-Config-and-Run.md)|
|[Notes on file formats used with Proxmark3](/doc/extensions_notes.md)|[Notes on MFU binary format](/doc/mfu_binary_format_notes.md)|[Notes on FPGA & ARM](/doc/fpga_arm_notes.md)|
|[Developing standalone mode](/armsrc/Standalone/readme.md)|[Wiki about standalone mode](https://github.com/RfidResearchGroup/proxmark3/wiki/Standalone-mode)|[Notes on Magic cards](/doc/magic_cards_notes.md)|
|[Notes on Color usage](/doc/colors_notes.md)|[Makefile vs CMake](/doc/md/Development/Makefile-vs-CMake.md)|[Notes on Cloner guns](/doc/cloner_notes.md)|
In order to build this repo for other/generic Proxmark3 platforms we urge you to read [Advanced compilation parameters](/doc/md/Use_of_Proxmark/4_Advanced-compilation-parameters.md)
> ⚠ **Note**: About flash memory size of other Proxmark3 platforms. You need to keep a eye on how large your ARM chip built-in flash memory is. With 512kb you are fine but if its 256kb you need to compile this repo with even less functionality. When running the `./pm3-flash-all` you can see which size your device have if you have the bootloader from this repo installed. Otherwise you will find the size reported in the start message when running the Proxmark3 client `./pm3`.
> ⚠ **Note**: This is a bleeding edge repository. The maintainers actively is working out of this repository and will be periodically re-structuring the code to make it easier to comprehend, navigate, build, test, and contribute to, so **DO expect significant changes to code layout on a regular basis**.
We don't maintain any precompiled binaries in this repo. There is community effort over at the Proxmark3 forum where @gator96100 has set up a AWS bucket with many mingw binaries which is up-to-date. We link to these files here as to make it easier for users.
If you are having troubles with these files, contact the package maintainer [@gator96100](https://github.com/gator96100) and read the [sticky thread at forum](http://www.proxmark.org/forum/viewtopic.php?pid=24763#p24763) where known issues has been documented.
The [public roadmap](https://github.com/RfidResearchGroup/proxmark3/wiki/Public-Roadmap) is an excellent start to read if you are interesting in contributing.
Next place to visit is the [Proxmark3 Forum](http://www.proxmark.org/forum/index.php). Learn to search it well and finally Google / duckduckgo is your friend :)
You will find many blogposts, youtube videos, tweets, reddit
Iceman has quite a few videos on his channel and Quentyn has risen up the last year with good informative videos. We suggest you check them out and smash that subscribe buttons!
The separation from official Proxmark3 repo gives us a lot of freedom to create a firmware/client that suits the RDV40 features. We don't want to mess up the official Proxmark3 repo with RDV40 specific code.
The new [Proxmark3 Universal GUI](https://github.com/burma69/PM3UniversalGUI) will work more or less. Change is needed in order to show helptext when client isn't connected to a device. We don't know how active the maintainers are. There has been brought to our attention that there is quite a few Chinese Windows GUI available. Usually you find them on alibaba / taobao ads but we have no idea which fw/client they are compatible with. Proceed with caution if you decide to go down that road.
