proxmark3/doc/md/Installation_Instructions/Windows-Installation-Instructions.md

167 lines
6.4 KiB
Markdown
Raw Normal View History

# Installing on Windows
There are two ways to install, build and use Proxmark3 on Windows:
* Using Gator96100 **ProxSpace**, a package to assist in your Windows installation of MinGW
* Using native **WSL 1**, if you're running a Windows 10 version recent enough (FCU 1709 or later)
---
# Installing on Windows with ProxSpace
## Video Installation guide
[![Windows Installation tutorial](https://github.com/5w0rdfish/Proxmark3-RDV4-ParrotOS/blob/master/screenshot-www.youtube.com-2019.03.17-20-44-33.png)](https://youtu.be/zzF0NCMJnYU "Windows Installation Tutorial")
## Driver Installation
Install required drivers for your Windows installation. You may need admin privileges to do this.
Step by step guides are online such as [RyscCorps](https://store.ryscc.com/blogs/news/how-to-install-a-proxmark3-driver-on-windows-10).
## Download ProxSpace repo
Download the Gator96100 ProxSpace package from https://github.com/Gator96100/ProxSpace/releases
Extract 'ProxSpace' to a location path without spaces.
Good example
```
D:\OneDrive\Documents\GitHub
```
Bad example
```
C:\My Documents\My Projects\proxspace
^
```
If you're running Windows in a Virtualbox guest, make sure not to install ProxSpace on a vbox shared drive. (It's ok later to move the `/pm3` subfolder to a shared drive and edit the `*.bat`)
## Launch ProxSpace
Run `runme64.bat`.
You'll get a Bash prompt and your home directory should become the ProxSpace `pm3` sub-directory.
Please note you will need to use `/` in paths as you are using Bash.
## Clone the RRG/Iceman repository
```sh
cd
git clone https://github.com/RfidResearchGroup/proxmark3.git
cd proxmark3
```
2019-05-06 01:53:58 +08:00
2019-07-13 06:36:10 +08:00
If you're a contributing developer, you probably want to be able to use `make style`. If so, you've to install astyle:
```sh
pacman -S mingw-w64-x86_64-astyle
```
## Compile and use the project
To use the compiled client, the only differences are that executables end with `.exe` (e.g. `proxmark3.exe`) and that the Proxmark3 port is one of your `comX` ports where "X" is the com port number assigned to proxmark3 under Windows, so commands like `proxmark3 /dev/ttyACMX` become `proxmark3.exe comX`.
2019-09-10 01:55:55 +08:00
Now you're ready to follow the [compilation instructions](/doc/md/Use_of_Proxmark/0_Compilation-Instructions.md).
# Installing on Windows with WSL 1
WSL 1 requires to run on Windows 10 version 1709 or above. Previous windows versions didn't have support for COM ports.
### stay away from WSL 2
*Microsoft introduced WSL 2 starting on Windows 10 version 2004 with Hyper-V powering its virtualization; As of 2020-08-13, WSL 2 does not support USB and Serial.*
###
Install WSL 1 with e.g. the standard Ubuntu. You can follow the guide on [Microsoft Docs](https://docs.microsoft.com/en-us/windows/wsl/install-win10) but be careful to follow WSL 1 specific instructions! When they recommend you to restart, you must restart.
For WSL configuration, see [Manage and configure Windows Subsystem for Linux](https://docs.microsoft.com/en-us/windows/wsl/wsl-config).
2019-09-24 17:45:38 +08:00
Make sure your WSL can launch Windows processes to get the `pm3` scripts working (cf `interop` in the WSL settings).
## X Server Installation
2019-07-13 06:36:10 +08:00
If you want to run the graphical components of the Proxmark3 client, you need to install a X Server such as [VcXsrv](https://sourceforge.net/projects/vcxsrv/) or [Xming](https://sourceforge.net/projects/xming/) and launch it, e.g. by executing XLaunch.
## Window terminal Installation
Microsoft has recent released a new terminal for their OS. It is much better experience than old `cmd.exe` so we strongly recommend installing it.
It is also open sourced, ref [terminal](https://github.com/microsoft/terminal). You can download and install from here: [windows terminal](https://aka.ms/terminal)
## Dependencies
Enter WSL prompt (`wsl` or `start windows terminal`) and from there, follow the [Linux Installation Instructions](/doc/md/Installation_Instructions/Linux-Installation-Instructions.md) for Ubuntu, summarized here below:
2020-09-15 23:36:07 +08:00
Make sure your WSL guest OS is up-to-date first
```sh
sudo apt-get update
2020-09-15 23:36:07 +08:00
sudo apt-get upgrade -y
sudo apt-get auto-remove -y
```
Install dependencies
```sh
sudo apt-get install --no-install-recommends git ca-certificates build-essential pkg-config \
2020-06-07 23:43:39 +08:00
libreadline-dev gcc-arm-none-eabi libnewlib-dev libbz2-dev qtbase5-dev
```
_note_
If you don't need the graphical components of the Proxmark3 client, you can skip the installation of `qtbase5-dev`.
## Clone the RRG/Iceman repository
```sh
git clone https://github.com/RfidResearchGroup/proxmark3.git
```
## Compile and use the project
To use the compiled client, the only difference is that the Proxmark3 port is translated from your `comX` port where **"X"** is the com port number assigned to proxmark3 under Windows, to a `/dev/ttySX`, so commands become:
2019-05-06 01:53:58 +08:00
2019-09-10 01:55:55 +08:00
```sh
proxmark3 /dev/ttyACM0 => proxmark3 /dev/ttySX
```
2019-05-06 01:53:58 +08:00
Depending on the Windows version, you might need to give permission to the current user to access `/dev/ttySX`: (change **X** to your port number)
```sh
2019-07-13 06:06:19 +08:00
ls -al /dev/ttySX
groups|grep dialout
```
2019-07-13 06:06:19 +08:00
If group ownership is `dialout` and your user is member of `dialout` group, all is fine. Else you'll have to provide access to `/dev/ttySX`: (Unfortunately the access rights of the port won't survive and will have to be fixed again next time.)
```sh
sudo chmod 666 /dev/ttySX
```
If you installed a X Server and compiled the Proxmark3 with QT4 support, you've to export the `DISPLAY` environment variable:
```sh
export DISPLAY=:0
```
and add it to your Bash profile for the next times:
```sh
echo "export DISPLAY=:0" >> ~/.bashrc
```
Note that it may take a quite long time for a freshly plugged Proxmark3 to be visible on a WSL /dev/ttySX port.
2019-09-10 01:55:55 +08:00
Now you're ready to follow the [compilation instructions](/doc/md/Use_of_Proxmark/0_Compilation-Instructions.md).
2019-10-06 15:40:50 +08:00
## Color text on windows 10
2020-10-23 07:24:54 +08:00
In later versions of windows 10 you may be able to get color to work by setting this registry key
2019-10-06 15:40:50 +08:00
```
[HKEY_CURRENT_USER\Console]
"VirtualTerminalLevel"=dword:00000001
```
2019-10-26 10:17:33 +08:00
You also need to disable "use legacy console" in the cmd.exe properties, or set the following registry key
```
[HKEY_CURRENT_USER\Console]
"ForceV2"=dword:00000001
```
After making these changes, you will need to start a new command prompt (cmd.exe) to ensure its using the new settings.
If after making these changes (and restarting proxmark3.exe) you get extra characters and no color text, set either key to 0 or enable legacy mode again (and restart the command prompt).