proxmark3/include/proxmark3_arm.h

136 lines
5 KiB
C
Raw Normal View History

2010-02-21 06:50:30 +08:00
//-----------------------------------------------------------------------------
// Jonathan Westhues, Mar 2006
//
// This code is licensed to you under the terms of the GNU GPL, version 2 or,
// at your option, any later version. See the LICENSE.txt file for the text of
// the license.
//-----------------------------------------------------------------------------
// Hardware and interface definitions
2010-02-21 06:50:30 +08:00
//-----------------------------------------------------------------------------
#ifndef __PROXMARK3_H
#define __PROXMARK3_H
#include "common.h"
2010-02-21 06:50:30 +08:00
// Might as well have the hardware-specific defines everywhere.
#include "at91sam7s512.h"
#include "config_gpio.h"
#include "pm3_cmd.h"
2010-02-21 06:50:30 +08:00
// Check bootrom.c for actual clock settings
#define MAINCK 16000000
2019-08-07 20:55:29 +08:00
#define MCK (3 * MAINCK)
2019-03-10 01:41:30 +08:00
#define WDT_HIT() AT91C_BASE_WDTC->WDTC_WDCR = 0xa5000001
#define PWM_CH_MODE_PRESCALER(x) ((x) << 0)
#define PWM_CHANNEL(x) (1 << (x))
#define ADC_CHAN_LF 4
#define ADC_CHAN_HF 5
#define ADC_CHAN_HF_RDV40 7
#define ADC_MODE_PRESCALE(x) ((x) << 8)
#define ADC_MODE_STARTUP_TIME(x) ((x) << 16)
#define ADC_MODE_SAMPLE_HOLD_TIME(x) ((x) << 24)
#define ADC_CHANNEL(x) (1 << (x))
#define ADC_END_OF_CONVERSION(x) (1 << (x))
#define SSC_CLOCK_MODE_START(x) ((x) << 8)
#define SSC_FRAME_MODE_WORDS_PER_TRANSFER(x) ((x) << 8)
#define SSC_CLOCK_MODE_SELECT(x) ((x) << 0)
#define SSC_FRAME_MODE_BITS_IN_WORD(x) (((x)-1) << 0)
#define MC_FLASH_COMMAND_KEY ((0x5a) << 24)
#define MC_FLASH_MODE_FLASH_WAIT_STATES(x) ((x) << 8)
#define MC_FLASH_MODE_MASTER_CLK_IN_MHZ(x) (((x)+((x)/2)) << 16)
#define MC_FLASH_COMMAND_PAGEN(x) ((x) << 8)
#define RST_CONTROL_KEY (0xa5 << 24)
#define PMC_MAIN_OSC_STARTUP_DELAY(x) ((x) << 8)
#define PMC_PLL_DIVISOR(x) (x)
#define PMC_PLL_MULTIPLIER(x) (((x)-1) << 16)
#define PMC_PLL_COUNT_BEFORE_LOCK(x) (((x) & 0x3F) << 8) // 6bit register 0011 1111
#define PMC_PLL_FREQUENCY_RANGE(x) (((x) & 0x3) << 14) // 2bit register
#define PMC_PLL_USB_DIVISOR(x) ((x) << 28)
#define UDP_INTERRUPT_ENDPOINT(x) (1 << (x))
#define UDP_CSR_BYTES_RECEIVED(x) (((x) >> 16) & 0x7ff)
2010-02-21 06:50:30 +08:00
//**************************************************************
2019-03-10 01:41:30 +08:00
#define LOW(x) AT91C_BASE_PIOA->PIO_CODR |= (x)
#define HIGH(x) AT91C_BASE_PIOA->PIO_SODR |= (x)
2019-03-10 01:41:30 +08:00
#define GETBIT(x) (AT91C_BASE_PIOA->PIO_ODSR & (x)) ? 1:0
2012-07-11 23:52:33 +08:00
#define SETBIT(x, y) (y) ? (HIGH(x)):(LOW(x))
2019-03-10 01:41:30 +08:00
#define INVBIT(x) SETBIT((x), !(GETBIT(x)))
2010-02-21 06:50:30 +08:00
// Setup for SPI current modes
2019-03-10 01:41:30 +08:00
#define SPI_FPGA_MODE 0
#define SPI_LCD_MODE 1
#define SPI_MEM_MODE 2
2010-02-21 06:50:30 +08:00
#ifndef COTAG_BITS
#define COTAG_BITS 264
#endif
2019-03-10 01:41:30 +08:00
#define LED_A_ON() HIGH(GPIO_LED_A)
#define LED_A_OFF() LOW(GPIO_LED_A)
#define LED_A_INV() INVBIT(GPIO_LED_A)
#define LED_B_ON() HIGH(GPIO_LED_B)
#define LED_B_OFF() LOW(GPIO_LED_B)
#define LED_B_INV() INVBIT(GPIO_LED_B)
#define LED_C_ON() HIGH(GPIO_LED_C)
#define LED_C_OFF() LOW(GPIO_LED_C)
#define LED_C_INV() INVBIT(GPIO_LED_C)
#define LED_D_ON() HIGH(GPIO_LED_D)
#define LED_D_OFF() LOW(GPIO_LED_D)
#define LED_D_INV() INVBIT(GPIO_LED_D)
2019-09-12 23:39:57 +08:00
// SPI
2019-03-10 01:41:30 +08:00
#define SCK_LOW LOW(GPIO_SPCK)
#define SCK_HIGH HIGH(GPIO_SPCK)
#define MOSI_HIGH HIGH(GPIO_MOSI)
#define MOSI_LOW LOW(GPIO_MOSI)
#define MISO_VALUE (AT91C_BASE_PIOA->PIO_PDSR & GPIO_MISO)
2018-02-13 21:12:28 +08:00
// fpga
#define NCS_0_LOW LOW(GPIO_NCS0)
#define NCS_0_HIGH HIGH(GPIO_NCS0)
// flash mem PA1
#define NCS_1_LOW LOW(GPIO_NCS2)
#define NCS_1_HIGH HIGH(GPIO_NCS2)
2018-02-13 21:12:28 +08:00
2019-03-10 01:41:30 +08:00
#define RELAY_ON() HIGH(GPIO_RELAY)
#define RELAY_OFF() LOW(GPIO_RELAY)
2019-09-12 23:39:57 +08:00
#define BUTTON_PRESS() !((AT91C_BASE_PIOA->PIO_PDSR & GPIO_BUTTON) == GPIO_BUTTON)
#define WAIT_BUTTON_RELEASED() { while ( BUTTON_PRESS() ) { WDT_HIT(); }; }
//NVDD goes LOW when USB is attached.
2019-03-10 01:41:30 +08:00
#define USB_ATTACHED() !((AT91C_BASE_PIOA->PIO_PDSR & GPIO_NVDD_ON) == GPIO_NVDD_ON)
2010-02-21 06:50:30 +08:00
// VERSION_INFORMATION is now in common.h
2010-02-21 06:50:30 +08:00
2019-04-26 14:29:21 +08:00
#define COMMON_AREA_MAGIC 0x43334d50 // "PM3C"
2010-02-21 06:50:30 +08:00
#define COMMON_AREA_COMMAND_NONE 0
#define COMMON_AREA_COMMAND_ENTER_FLASH_MODE 1
struct common_area {
2019-03-10 01:41:30 +08:00
int magic; /* Magic sequence, to distinguish against random uninitialized memory */
char version; /* Must be 1 */
char command;
struct {
2019-03-10 07:00:59 +08:00
unsigned int bootrom_present: 1; /* Set when a bootrom that is capable of parsing the common area is present */
unsigned int osimage_present: 1; /* Set when a osimage that is capable of parsing the common area is present */
unsigned int button_pressed: 1;
} PACKED flags;
2019-03-10 01:41:30 +08:00
int arg1, arg2;
} PACKED;
2010-02-21 06:50:30 +08:00
#endif