proxmark3/common/mbedtls/ecdsa.h

344 lines
14 KiB
C
Raw Normal View History

2018-11-08 00:05:02 +08:00
/**
* \file ecdsa.h
*
* \brief This file contains ECDSA definitions and functions.
*
* The Elliptic Curve Digital Signature Algorithm (ECDSA) is defined in
* <em>Standards for Efficient Cryptography Group (SECG):
* SEC1 Elliptic Curve Cryptography</em>.
* The use of ECDSA for TLS is defined in <em>RFC-4492: Elliptic Curve
* Cryptography (ECC) Cipher Suites for Transport Layer Security (TLS)</em>.
*
*/
/*
* Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of Mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_ECDSA_H
#define MBEDTLS_ECDSA_H
#include "ecp.h"
#include "md.h"
/*
* RFC-4492 page 20:
*
* Ecdsa-Sig-Value ::= SEQUENCE {
* r INTEGER,
* s INTEGER
* }
*
* Size is at most
* 1 (tag) + 1 (len) + 1 (initial 0) + ECP_MAX_BYTES for each of r and s,
* twice that + 1 (tag) + 2 (len) for the sequence
* (assuming ECP_MAX_BYTES is less than 126 for r and s,
* and less than 124 (total len <= 255) for the sequence)
*/
#if MBEDTLS_ECP_MAX_BYTES > 124
#error "MBEDTLS_ECP_MAX_BYTES bigger than expected, please fix MBEDTLS_ECDSA_MAX_LEN"
#endif
/** The maximal size of an ECDSA signature in Bytes. */
#define MBEDTLS_ECDSA_MAX_LEN ( 3 + 2 * ( 3 + MBEDTLS_ECP_MAX_BYTES ) )
/**
* \brief The ECDSA context structure.
*/
typedef mbedtls_ecp_keypair mbedtls_ecdsa_context;
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief This function computes the ECDSA signature of a
* previously-hashed message.
*
* \note The deterministic version is usually preferred.
*
* \note If the bitlength of the message hash is larger than the
* bitlength of the group order, then the hash is truncated
* as defined in <em>Standards for Efficient Cryptography Group
* (SECG): SEC1 Elliptic Curve Cryptography</em>, section
* 4.1.3, step 5.
*
* \see ecp.h
*
* \param grp The ECP group.
* \param r The first output integer.
* \param s The second output integer.
* \param d The private signing key.
* \param buf The message hash.
* \param blen The length of \p buf.
* \param f_rng The RNG function.
* \param p_rng The RNG context.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX
* or \c MBEDTLS_MPI_XXX error code on failure.
*/
2019-03-10 07:00:59 +08:00
int mbedtls_ecdsa_sign(mbedtls_ecp_group *grp, mbedtls_mpi *r, mbedtls_mpi *s,
const mbedtls_mpi *d, const unsigned char *buf, size_t blen,
int (*f_rng)(void *, unsigned char *, size_t), void *p_rng);
2018-11-08 00:05:02 +08:00
#if defined(MBEDTLS_ECDSA_DETERMINISTIC)
/**
* \brief This function computes the ECDSA signature of a
* previously-hashed message, deterministic version.
*
* For more information, see <em>RFC-6979: Deterministic
* Usage of the Digital Signature Algorithm (DSA) and Elliptic
* Curve Digital Signature Algorithm (ECDSA)</em>.
*
* \note If the bitlength of the message hash is larger than the
* bitlength of the group order, then the hash is truncated as
* defined in <em>Standards for Efficient Cryptography Group
* (SECG): SEC1 Elliptic Curve Cryptography</em>, section
* 4.1.3, step 5.
*
* \see ecp.h
*
* \param grp The ECP group.
* \param r The first output integer.
* \param s The second output integer.
* \param d The private signing key.
* \param buf The message hash.
* \param blen The length of \p buf.
* \param md_alg The MD algorithm used to hash the message.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX or \c MBEDTLS_MPI_XXX
* error code on failure.
*/
2019-03-10 07:00:59 +08:00
int mbedtls_ecdsa_sign_det(mbedtls_ecp_group *grp, mbedtls_mpi *r, mbedtls_mpi *s,
const mbedtls_mpi *d, const unsigned char *buf, size_t blen,
mbedtls_md_type_t md_alg);
2018-11-08 00:05:02 +08:00
#endif /* MBEDTLS_ECDSA_DETERMINISTIC */
/**
* \brief This function verifies the ECDSA signature of a
* previously-hashed message.
*
* \note If the bitlength of the message hash is larger than the
* bitlength of the group order, then the hash is truncated as
* defined in <em>Standards for Efficient Cryptography Group
* (SECG): SEC1 Elliptic Curve Cryptography</em>, section
* 4.1.4, step 3.
*
* \see ecp.h
*
* \param grp The ECP group.
* \param buf The message hash.
* \param blen The length of \p buf.
* \param Q The public key to use for verification.
* \param r The first integer of the signature.
* \param s The second integer of the signature.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if the signature
* is invalid.
* \return An \c MBEDTLS_ERR_ECP_XXX or \c MBEDTLS_MPI_XXX
* error code on failure for any other reason.
*/
2019-03-10 07:00:59 +08:00
int mbedtls_ecdsa_verify(mbedtls_ecp_group *grp,
const unsigned char *buf, size_t blen,
const mbedtls_ecp_point *Q, const mbedtls_mpi *r, const mbedtls_mpi *s);
2018-11-08 00:05:02 +08:00
/**
* \brief This function computes the ECDSA signature and writes it
* to a buffer, serialized as defined in <em>RFC-4492:
* Elliptic Curve Cryptography (ECC) Cipher Suites for
* Transport Layer Security (TLS)</em>.
*
* \warning It is not thread-safe to use the same context in
* multiple threads.
*
* \note The deterministic version is used if
* #MBEDTLS_ECDSA_DETERMINISTIC is defined. For more
* information, see <em>RFC-6979: Deterministic Usage
* of the Digital Signature Algorithm (DSA) and Elliptic
* Curve Digital Signature Algorithm (ECDSA)</em>.
*
* \note The \p sig buffer must be at least twice as large as the
* size of the curve used, plus 9. For example, 73 Bytes if
* a 256-bit curve is used. A buffer length of
* #MBEDTLS_ECDSA_MAX_LEN is always safe.
*
* \note If the bitlength of the message hash is larger than the
* bitlength of the group order, then the hash is truncated as
* defined in <em>Standards for Efficient Cryptography Group
* (SECG): SEC1 Elliptic Curve Cryptography</em>, section
* 4.1.3, step 5.
*
* \see ecp.h
*
* \param ctx The ECDSA context.
* \param md_alg The message digest that was used to hash the message.
* \param hash The message hash.
* \param hlen The length of the hash.
* \param sig The buffer that holds the signature.
* \param slen The length of the signature written.
* \param f_rng The RNG function.
* \param p_rng The RNG context.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX, \c MBEDTLS_ERR_MPI_XXX or
* \c MBEDTLS_ERR_ASN1_XXX error code on failure.
*/
2019-03-10 07:00:59 +08:00
int mbedtls_ecdsa_write_signature(mbedtls_ecdsa_context *ctx, mbedtls_md_type_t md_alg,
const unsigned char *hash, size_t hlen,
unsigned char *sig, size_t *slen,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng);
2018-11-08 00:05:02 +08:00
#if defined(MBEDTLS_ECDSA_DETERMINISTIC)
#if ! defined(MBEDTLS_DEPRECATED_REMOVED)
#if defined(MBEDTLS_DEPRECATED_WARNING)
#define MBEDTLS_DEPRECATED __attribute__((deprecated))
#else
#define MBEDTLS_DEPRECATED
#endif
/**
* \brief This function computes an ECDSA signature and writes
* it to a buffer, serialized as defined in <em>RFC-4492:
* Elliptic Curve Cryptography (ECC) Cipher Suites for
* Transport Layer Security (TLS)</em>.
*
* The deterministic version is defined in <em>RFC-6979:
* Deterministic Usage of the Digital Signature Algorithm (DSA)
* and Elliptic Curve Digital Signature Algorithm (ECDSA)</em>.
*
* \warning It is not thread-safe to use the same context in
* multiple threads.
*
* \note The \p sig buffer must be at least twice as large as the
* size of the curve used, plus 9. For example, 73 Bytes if a
* 256-bit curve is used. A buffer length of
* #MBEDTLS_ECDSA_MAX_LEN is always safe.
*
* \note If the bitlength of the message hash is larger than the
* bitlength of the group order, then the hash is truncated as
* defined in <em>Standards for Efficient Cryptography Group
* (SECG): SEC1 Elliptic Curve Cryptography</em>, section
* 4.1.3, step 5.
*
* \see ecp.h
*
* \deprecated Superseded by mbedtls_ecdsa_write_signature() in
* Mbed TLS version 2.0 and later.
*
* \param ctx The ECDSA context.
* \param hash The message hash.
* \param hlen The length of the hash.
* \param sig The buffer that holds the signature.
* \param slen The length of the signature written.
* \param md_alg The MD algorithm used to hash the message.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX, \c MBEDTLS_ERR_MPI_XXX or
* \c MBEDTLS_ERR_ASN1_XXX error code on failure.
*/
2019-03-10 07:00:59 +08:00
int mbedtls_ecdsa_write_signature_det(mbedtls_ecdsa_context *ctx,
const unsigned char *hash, size_t hlen,
unsigned char *sig, size_t *slen,
mbedtls_md_type_t md_alg) MBEDTLS_DEPRECATED;
2018-11-08 00:05:02 +08:00
#undef MBEDTLS_DEPRECATED
#endif /* MBEDTLS_DEPRECATED_REMOVED */
#endif /* MBEDTLS_ECDSA_DETERMINISTIC */
/**
* \brief This function reads and verifies an ECDSA signature.
*
* \note If the bitlength of the message hash is larger than the
* bitlength of the group order, then the hash is truncated as
* defined in <em>Standards for Efficient Cryptography Group
* (SECG): SEC1 Elliptic Curve Cryptography</em>, section
* 4.1.4, step 3.
*
* \see ecp.h
*
* \param ctx The ECDSA context.
* \param hash The message hash.
* \param hlen The size of the hash.
* \param sig The signature to read and verify.
* \param slen The size of \p sig.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if signature is invalid.
* \return #MBEDTLS_ERR_ECP_SIG_LEN_MISMATCH if there is a valid
* signature in \p sig, but its length is less than \p siglen.
* \return An \c MBEDTLS_ERR_ECP_XXX or \c MBEDTLS_ERR_MPI_XXX
* error code on failure for any other reason.
*/
2019-03-10 07:00:59 +08:00
int mbedtls_ecdsa_read_signature(mbedtls_ecdsa_context *ctx,
const unsigned char *hash, size_t hlen,
const unsigned char *sig, size_t slen);
2018-11-08 00:05:02 +08:00
/**
* \brief This function generates an ECDSA keypair on the given curve.
*
* \see ecp.h
*
* \param ctx The ECDSA context to store the keypair in.
* \param gid The elliptic curve to use. One of the various
* \c MBEDTLS_ECP_DP_XXX macros depending on configuration.
* \param f_rng The RNG function.
* \param p_rng The RNG context.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX code on failure.
*/
2019-03-10 07:00:59 +08:00
int mbedtls_ecdsa_genkey(mbedtls_ecdsa_context *ctx, mbedtls_ecp_group_id gid,
int (*f_rng)(void *, unsigned char *, size_t), void *p_rng);
2018-11-08 00:05:02 +08:00
/**
* \brief This function sets an ECDSA context from an EC key pair.
*
* \see ecp.h
*
* \param ctx The ECDSA context to set.
* \param key The EC key to use.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX code on failure.
*/
2019-03-10 07:00:59 +08:00
int mbedtls_ecdsa_from_keypair(mbedtls_ecdsa_context *ctx, const mbedtls_ecp_keypair *key);
2018-11-08 00:05:02 +08:00
/**
* \brief This function initializes an ECDSA context.
*
* \param ctx The ECDSA context to initialize.
*/
2019-03-10 07:00:59 +08:00
void mbedtls_ecdsa_init(mbedtls_ecdsa_context *ctx);
2018-11-08 00:05:02 +08:00
/**
* \brief This function frees an ECDSA context.
*
* \param ctx The ECDSA context to free.
*/
2019-03-10 07:00:59 +08:00
void mbedtls_ecdsa_free(mbedtls_ecdsa_context *ctx);
2018-11-08 00:05:02 +08:00
2019-07-28 05:48:52 +08:00
int ecdsa_signature_to_asn1(const mbedtls_mpi *r, const mbedtls_mpi *s, unsigned char *sig, size_t *slen);
2018-11-08 00:05:02 +08:00
#ifdef __cplusplus
}
#endif
#endif /* ecdsa.h */