This repo is based on iceman fork for proxmark3. It is dedicated to bringing the most out of the new features for proxmark3 RDV4.0 new hardware and design.
|[What has changed?](#what-has-changed) | [Setup and build for Linux](/doc/md/Installation_Instructions/Linux-Installation-Instructions.md) | [Compilation Instructions](/doc/md/Use_of_Proxmark/0_Compilation-Instructions.md)|
|[Development](#development) | [Important notes on ModemManager for Linux users](/doc/md/Installation_Instructions/ModemManager-Must-Be-Discarded.md) | [Validating proxmark client functionality](/doc/md/Use_of_Proxmark/1_Validation.md) |
|[Why didn't you base it on official PM3 Master?](#why-didnt-you-base-it-on-official-pm3-master)| [Homebrew (Mac OS X) & Upgrading HomeBrew Tap Formula](/doc/md/Installation_Instructions/Mac-OS-X-Homebrew-Installation-Instructions.md) | [First Use and Verification](/doc/md/Use_of_Proxmark/2_Configuration-and-Verification.md)|
|[PM3 GUI](#pm3-gui)|[Setup and build for Windows](/doc/md/Installation_Instructions/Windows-Installation-Instructions.md)|[Commands & Features](/doc/md/Use_of_Proxmark/3_Commands-and-Features.md)|
The separation from official pm3 repo gives us a lot of freedom to create a firmware/client that suits the RDV40 features. We don't want to mess up the official pm3 repo with RDV40 specific code.
Please see the [Proxmark Forum](http://www.proxmark.org/forum/index.php) and see if your issue is listed in the first instance Google is your friend :) Questions will be answered via the forum by Iceman and the team.
It's need to have good USB cable to connect proxmark to USB. If you have stability problems (pm3 resets, firmware hangs, especially firmware hangs just after start and etc) - check your cable with USB tester (or try to change it). It needs to have resistance like 0.3 Om or less.