2018-08-14 04:41:27 +08:00
Proxmark3 RDV40 dedicated repo, based on iceman fork
2016-05-05 16:08:33 +08:00
===============
2018-08-13 03:54:31 +08:00
[](https://github.com/RfidResearchGroup/proxmark3/releases/latest)
2016-04-27 18:56:22 +08:00
2017-04-26 21:40:13 +08:00
## Notice
2018-08-13 03:54:31 +08:00
This repo is based on iceman fork for proxmark3. It is dedicated to bring the most out of the new features for proxmark3 RDV40 device.
2016-02-19 03:40:04 +08:00
2017-04-26 21:40:13 +08:00
## Coverity Scan Config & Run
2016-01-20 04:48:29 +08:00
Download the Coverity Scan Self-buld and install it.
You will need to configure ARM-NON-EABI- Compiler for it to use:
2017-06-09 20:58:11 +08:00
2016-08-09 01:02:46 +08:00
- Configure
2017-06-09 20:58:11 +08:00
2016-08-09 00:51:34 +08:00
`cov-configure --comptype gcc --compiler /opt/devkitpro/devkitARM/bin/arm-none-eabi-gcc`
2016-01-20 04:48:29 +08:00
2017-06-09 20:58:11 +08:00
- Run it (I'm running on Ubuntu)
2016-08-09 00:51:34 +08:00
`cov-build --dir cov-int make all`
2016-01-20 04:48:29 +08:00
2017-06-09 20:58:11 +08:00
- Make a tarball
2016-08-09 00:51:34 +08:00
`tar czvf proxmark3.tgz cov-int`
2016-01-20 04:48:29 +08:00
2017-06-09 20:58:11 +08:00
- Upload it to coverity.com
2016-01-20 04:48:29 +08:00
2017-04-26 21:40:13 +08:00
## Whats changed?
2018-08-13 03:54:31 +08:00
* added flash memory 256kb.
* added smart card module
* added FPC connector
2016-03-08 23:52:10 +08:00
---
2018-08-13 03:54:31 +08:00
## Why didn't you based it on offical PM3 Master?
The separation from offical pm3 repo gives us very much freedom to create a firmware/client that suits the RDV40 features. We don't want to mess up the offical pm3 repo with RDV40 specific code.
2017-02-08 05:56:41 +08:00
2017-04-26 21:43:54 +08:00
## Why don't you add this or that functionality?
2018-08-13 03:54:31 +08:00
Give us a hint, and we'll see if we can't merge in the stuff you have.
2016-01-17 06:14:14 +08:00
2017-04-26 21:40:13 +08:00
## PM3 GUI
2018-08-13 03:54:31 +08:00
The official PM3-GUI from Gaucho will not work.
The new universial GUI will work.
2016-01-17 06:14:14 +08:00
2017-04-26 21:40:13 +08:00
## Development
2016-02-19 03:40:04 +08:00
This fork now compiles just fine on
2016-09-26 21:23:27 +08:00
- Windows/mingw environment with Qt5.6.1 & GCC 4.8
2017-02-19 04:55:24 +08:00
- Ubuntu 1404, 1510, 1604
2017-03-07 21:39:30 +08:00
- Mac OS X / Homebrew
- Docker container
2016-02-19 03:40:04 +08:00
2018-11-03 21:22:51 +08:00
## KALI and ARCHLINUX users
Kali and ArchLinux users usually must kill their modem manager in order for the proxmark3 to enumerate properly.
2017-04-26 21:40:13 +08:00
## Setup and build for UBUNTU
2017-02-19 04:58:32 +08:00
GC made updates to allow this to build easily on Ubuntu 14.04.2 LTS, 15.10 or 16.04
2016-02-19 03:40:04 +08:00
See https://github.com/Proxmark/proxmark3/wiki/Ubuntu%20Linux
2016-01-17 06:14:14 +08:00
2017-02-19 04:58:32 +08:00
A nice and cool install script made by @daveio is found here:
https://github.com/daveio/attacksurface/blob/master/proxmark3/pm3-setup.sh
2018-01-21 02:31:04 +08:00
I have also added this script to the fork.
2018-08-13 03:54:31 +08:00
https://github.com/RfidResearchGroup/proxmark3/blob/master/install.sh
2017-02-19 04:58:32 +08:00
2018-01-21 02:31:04 +08:00
- Run
2018-11-03 21:22:51 +08:00
`sudo apt-get install p7zip git build-essential libreadline5 libreadline-dev libusb-0.1-4 libusb-dev libqt4-dev perl pkg-config wget libncurses5-dev gcc-arm-none-eabi libjansson-dev`
2016-02-19 03:40:04 +08:00
2018-08-13 03:54:31 +08:00
- Clone fork
`git clone https://github.com/RfidResearchGroup/proxmark3.git`
2016-01-17 06:14:14 +08:00
2018-01-21 02:31:04 +08:00
- Get the latest commits
2016-08-09 00:58:05 +08:00
`git pull`
2016-02-19 03:40:04 +08:00
2018-01-21 02:31:04 +08:00
- Install the blacklist rules and add user to dialout group (if you on a Linux/ubuntu/debian). If you do this one, you need to logout and login in again to make sure your rights got changed.
2017-01-07 02:10:48 +08:00
`make udev`
2018-01-21 02:31:04 +08:00
- Clean and complete compilation
2016-08-09 00:58:05 +08:00
`make clean && make all`
2016-01-17 06:14:14 +08:00
2018-07-28 17:51:00 +08:00
- Flash the BOOTROM & FULLIMAGE
`client/flasher /dev/ttyACM0 -b bootrom/obj/bootrom.elf armsrc/obj/fullimage.elf`
2016-01-17 06:14:14 +08:00
2018-01-21 02:31:04 +08:00
- Change into the client folder
2016-08-09 00:58:05 +08:00
`cd client`
2016-01-17 06:14:14 +08:00
2018-01-21 02:31:04 +08:00
- Run the client
`./proxmark3 /dev/ttyACM0`
## Setup and build for ArchLinux
- Run
2018-11-03 21:22:51 +08:00
`sudo pacman -Sy base-devel p7zip libusb readline ncurses libjansson-dev arm-none-eabi-newlib --needed`
2018-01-21 02:31:04 +08:00
`yaourt -S termcap`
2018-08-13 03:54:31 +08:00
- Clone fork
`git clone https://github.com/RfidResearchGroup/proxmark3.git`
2018-01-21 02:31:04 +08:00
- Get the latest commits
`git pull`
- Install the blacklist rules and add user to dialout group (if you on a Linux/ubuntu/debian). If you do this one, you need to logout and login in again to make sure your rights got changed.
`make udev`
- Clean and complete compilation
`make clean && make all`
2018-07-28 17:51:00 +08:00
- Flash the BOOTROM & FULLIMAGE
`client/flasher /dev/ttyACM0 -b bootrom/obj/bootrom.elf armsrc/obj/fullimage.elf`
2018-01-21 02:31:04 +08:00
- Change into the client folder
`cd client`
- Run the client
2016-08-09 00:58:05 +08:00
`./proxmark3 /dev/ttyACM0`
2016-02-19 03:40:04 +08:00
2017-04-26 21:40:13 +08:00
## Homebrew (Mac OS X)
2016-05-05 15:59:54 +08:00
These instructions comes from @Chrisfu , where I got the proxmark3.rb scriptfile from.
2016-05-05 16:14:34 +08:00
Further questions about Mac & Homebrew, contact @Chrisfu (https://github.com/chrisfu/)
2016-01-17 06:14:14 +08:00
2016-05-05 15:59:54 +08:00
1. Install homebrew if you haven't yet already done so: http://brew.sh/
2018-08-13 03:54:31 +08:00
2. Tap this repo: `brew tap RfidResearchGroup/proxmark3`
2016-05-05 15:59:54 +08:00
3. Install Proxmark3: `brew install proxmark3` for stable release or `brew install --HEAD proxmark3` for latest non-stable from GitHub.
2018-02-02 18:42:00 +08:00
Upgrading HomeBrew tap formula
-----------------------------
*This method is useful for those looking to run bleeding-edge versions of iceman's client. Keep this in mind when attempting to update your HomeBrew tap formula as this procedure could easily cause a build to break if an update is unstable on macOS.*
2018-02-05 22:28:51 +08:00
Tested on macOS High Sierra 10.13.2
2018-02-02 18:42:00 +08:00
*Note: This assumes you have already installed iceman's fork from HomeBrew as mentioned above*
1. Force HomeBrew to pull the latest source from github
2018-08-13 03:54:31 +08:00
`brew upgrade --fetch-HEAD RfidResearchGroup/proxmark3`
2018-02-02 18:42:00 +08:00
2018-07-28 17:51:00 +08:00
2. Flash the bootloader & fullimage.elf
* With your Proxmark3 unplugged from your machine, press and hold the button on your Proxmark 3 as you plug it into a USB port. Continue to hold the button until after this step is complete and the `proxmark3-flasher` command outputs "Have a nice day!"*
`$ sudo proxmark3-flasher /dev/tty.usbmodem881 -b /usr/local/Cellar/proxmark3/HEAD-6a710ef/share/firmware/bootrom.elf /usr/local/Cellar/proxmark3/HEAD-6a710ef/share/firmware/fullimage.elf`
2018-02-02 18:42:00 +08:00
2018-07-28 17:51:00 +08:00
`$ sudo proxmark3-flasher /dev/tty.usbmodem881 `
2018-02-02 18:42:00 +08:00
4. Enjoy the update
2016-05-05 15:59:54 +08:00
2016-09-26 21:23:27 +08:00
## Building on Windows
2017-09-26 23:43:17 +08:00
### Gator96100 distro
Rather than download and install every one of these packages, a new ProxSpace
environment archive file will be made available for download on the project
page at @Gator96100 's repo
Afterwards just clone the iceman repo or download someone elses.
Read instructions on @Gator96100 repo page. (https://github.com/Gator96100/ProxSpace/)
Links
2018-11-03 21:22:51 +08:00
- https://github.com/Gator96100/ProxSpace/releases/tag/v3.1 (release v3.1 with gcc v7.3.0 )
- https://github.com/Gator96100/ProxSpace/releases/tag/v2.2 (release v2.2 with gcc v5.3.0 arm-none-eabi-gcc v7.1.0)
2017-09-26 23:43:17 +08:00
2016-10-18 22:50:32 +08:00
### 7. Build and run
2016-09-26 21:23:27 +08:00
2018-08-13 03:54:31 +08:00
- Clone fork
`git clone https://github.com/RfidResearchGroup/proxmark3.git`
2016-09-26 21:23:27 +08:00
- Get the latest commits
`git pull`
2018-01-21 02:31:04 +08:00
- CLEAN COMPILE
2016-09-26 21:23:27 +08:00
`make clean && make all`
Assuming you have Proxmark3 Windows drivers installed you can run the Proxmark software where "X" is the com port number assigned to proxmark3 under Windows.
2018-07-28 17:51:00 +08:00
- Flash the BOOTROM & FULLIMAGE
`client/flasher.exe comX -b bootrom/obj/bootrom.elf armsrc/obj/fullimage.elf`
2016-09-26 21:23:27 +08:00
2018-01-21 02:31:04 +08:00
- Change into the client folder
2016-09-26 21:23:27 +08:00
`cd client`
- Run the client
`proxmark3.exe comX`
2016-05-05 16:14:34 +08:00
iceman at host iuse.se
2018-08-13 03:54:31 +08:00
July 2018, Sweden
