mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2024-09-23 00:37:14 +08:00
30 lines
1.6 KiB
Markdown
30 lines
1.6 KiB
Markdown
|
## Homebrew (Mac OS X)
|
||
|
|
These instructions comes from @Chrisfu, where I got the proxmark3.rb scriptfile from.
|
||
|
|
Further questions about Mac & Homebrew, contact @Chrisfu (https://github.com/chrisfu/)
|
||
|
|
|
||
|
|
1. Install homebrew if you haven't yet already done so: http://brew.sh/
|
||
|
|
|
||
|
|
2. Tap this repo: `brew tap RfidResearchGroup/proxmark3`
|
||
|
|
|
||
|
|
3. Install Proxmark3: `brew install proxmark3` for stable release or `brew install --HEAD proxmark3` for latest non-stable from GitHub.
|
||
|
|
|
||
|
|
Upgrading HomeBrew tap formula
|
||
|
|
-----------------------------
|
||
|
|
*This method is useful for those looking to run bleeding-edge versions of iceman's client. Keep this in mind when attempting to update your HomeBrew tap formula as this procedure could easily cause a build to break if an update is unstable on macOS.*
|
||
|
|
|
||
|
|
Tested on macOS High Sierra 10.13.2
|
||
|
|
|
||
|
|
*Note: This assumes you have already installed iceman's fork from HomeBrew as mentioned above*
|
||
|
|
|
||
|
|
1. Force HomeBrew to pull the latest source from github
|
||
|
|
`brew upgrade --fetch-HEAD RfidResearchGroup/proxmark3`
|
||
|
|
|
||
|
|
2. Flash the bootloader & fullimage.elf
|
||
|
|
* With your Proxmark3 unplugged from your machine, press and hold the button on your Proxmark 3 as you plug it into a USB port. Continue to hold the button until after this step is complete and the `proxmark3-flasher` command outputs "Have a nice day!"*
|
||
|
|
`$ sudo proxmark3-flasher /dev/tty.usbmodem881 -b /usr/local/Cellar/proxmark3/HEAD-6a710ef/share/firmware/bootrom.elf /usr/local/Cellar/proxmark3/HEAD-6a710ef/share/firmware/fullimage.elf`
|
||
|
|
|
||
|
|
|
||
|
|
`$ sudo proxmark3-flasher /dev/tty.usbmodem881 `
|
||
|
|
|
||
|
|
4. Enjoy the update
|