proxmark3/fpga/fpga_pm3_top.v

439 lines
15 KiB
Coq
Raw Normal View History

2023-05-31 01:47:27 +08:00
//-----------------------------------------------------------------------------
// Copyright (C) Proxmark3 contributors. See AUTHORS.md for details.
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// See LICENSE.txt for the text of the license.
//-----------------------------------------------------------------------------
//
// The FPGA is responsible for interfacing between the A/D, the coil drivers,
// and the ARM. In the low-frequency modes it passes the data straight
// through, so that the ARM gets raw A/D samples over the SSP. In the high-
// frequency modes, the FPGA might perform some demodulation first, to
// reduce the amount of data that we must send to the ARM.
//-----------------------------------------------------------------------------
/*
Once upon a time the FPGA had a 16 input mux so we could have all LF and HF modules enabled and selectable
As the functionality grew, we run out of space in the FPGA and we had to split into an "LF only" and an "HF only" FPGA bitstream
But even then after a while it was not possible to fit all the HF functions at the same time so now we have multiple "HF only" bitstreams
For example "Felica but without ISO14443", or "ISO14443 but without Felica" or "HF_15 but without Felica and ISO14443"
Because of all of the above, you can not enable both HF and LF modes at the same time, because some LF modules outputs
map to the same mux inputs as some HF modules outputs (thanks to reducing the mux from 16 to 8 inputs) and you can not have
multiple outputs connected together therefore leading to a failed compilation
*/
// These defines are meant to be passed by the Makefile so do not uncomment them here
// Proxmark3 RDV4 target
//`define PM3RDV4
// Proxmark3 generic target
//`define PM3GENERIC
// iCopy-X with XC3S100E
//`define PM3ICOPYX
// Pass desired defines to compiler to enable required modules
// WITH_LF enables Low Frequency mode when defined else HF is enabled
//`define WITH_LF
// WITH_LF0 enables module reader
//`define WITH_LF0
// WITH_LF1 enables module edge detect
//`define WITH_LF1
// WITH_LF2 enables module passthrough
//`define WITH_LF2
// WITH_LF3 enables module ADC
//`define WITH_LF3
// WITH_HF0 enables module HF reader
//`define WITH_HF0
// WITH_HF1 enables module simulated tag
//`define WITH_HF1
// WITH_HF2 enables module ISO14443-A
//`define WITH_HF2
// WITH_HF3 enables module sniff
//`define WITH_HF3
// WITH_HF4 enables module ISO18092 FeliCa
//`define WITH_HF4
// WITH_HF5 enables module get trace
//`define WITH_HF5
//`include "define.v"
//`include "util.v"
//
//`ifdef WITH_LF `include "clk_divider.v" `endif
//`ifdef WITH_LF0 `include "lo_read.v" `endif
//`ifdef WITH_LF1 `include "lo_edge_detect.v" `endif
//`ifdef WITH_LF2 `include "lo_passthru.v" `endif
//`ifdef WITH_LF3 `include "lo_adc.v" `endif
//
//`ifdef WITH_HF_15
//`ifdef WITH_HF0 `include "hi_reader_15.v" `endif
//`else
//`ifdef WITH_HF0 `include "hi_reader.v" `endif
//`endif
//`ifdef WITH_HF1 `include "hi_simulate.v" `endif
//`ifdef WITH_HF2 `include "hi_iso14443a.v" `endif
//`ifdef WITH_HF3 `include "hi_sniffer.v" `endif
//`ifdef WITH_HF4 `include "hi_flite.v" `endif
//`ifdef WITH_HF5 `include "hi_get_trace.v" `endif
module fpga_top(
input ck_1356meg,
input ck_1356megb,
input spck,
input pck0,
input ncs,
input [7:0] adc_d,
input cross_hi,
input cross_lo,
input mosi,
input ssp_dout,
output ssp_din,
output ssp_frame,
output ssp_clk,
output adc_clk,
output adc_noe,
output miso,
output pwr_lo,
output pwr_hi,
output pwr_oe1,
output pwr_oe2,
output pwr_oe3,
output pwr_oe4,
output dbg
);
// In all modes, let the ADC's outputs be enabled.
assign adc_noe = 1'b0;
//-----------------------------------------------------------------------------
// The SPI receiver. This sets up the configuration word, which the rest of
// the logic looks at to determine how to connect the A/D and the coil
// drivers (i.e., which section gets it). Also assign some symbolic names
// to the configuration bits, for use below.
//-----------------------------------------------------------------------------
// Receive 16bits of data from ARM here.
reg [15:0] shift_reg;
always @(posedge spck) if (~ncs) shift_reg <= {shift_reg[14:0], mosi};
reg trace_enable;
reg [7:0] lf_ed_threshold;
// adjustable frequency clock
wire [7:0] pck_cnt;
wire pck_divclk;
reg [7:0] divisor;
clk_divider div_clk(pck0, divisor, pck_cnt, pck_divclk);
`ifdef WITH_LF
reg [11:0] conf_word;
`else
reg [8:0] conf_word;
`endif
// We switch modes between transmitting to the 13.56 MHz tag and receiving
// from it, which means that we must make sure that we can do so without
// glitching, or else we will glitch the transmitted carrier.
always @(posedge ncs)
begin
// 4 bit command
case (shift_reg[15:12])
`ifdef WITH_LF
`FPGA_CMD_SET_CONFREG:
begin
// 12 bit data
conf_word <= shift_reg[11:0];
if (shift_reg[8:6] == `FPGA_MAJOR_MODE_LF_EDGE_DETECT) lf_ed_threshold <= 127; // default threshold
end
`FPGA_CMD_SET_DIVISOR:
divisor <= shift_reg[7:0]; // 8bits
`FPGA_CMD_SET_EDGE_DETECT_THRESHOLD:
lf_ed_threshold <= shift_reg[7:0]; // 8 bits
`else
`FPGA_CMD_SET_CONFREG: conf_word <= shift_reg[8:0];
`FPGA_CMD_TRACE_ENABLE: trace_enable <= shift_reg[0];
`endif
endcase
end
//-----------------------------------------------------------------------------
// And then we instantiate the modules corresponding to each of the FPGA's
// major modes, and use muxes to connect the outputs of the active mode to
// the output pins.
//-----------------------------------------------------------------------------
// ############################################################################
// # Enable Low Frequency Modules
`ifdef WITH_LF
// LF reader (generic)
`ifdef WITH_LF0
lo_read lr(
.pck0 (pck0),
.pck_divclk (pck_divclk),
.pck_cnt (pck_cnt),
.adc_d (adc_d),
.lf_field (conf_word[0]),
.ssp_din (mux0_ssp_din),
.ssp_frame (mux0_ssp_frame),
.ssp_clk (mux0_ssp_clk),
.adc_clk (mux0_adc_clk),
.pwr_lo (mux0_pwr_lo),
.pwr_hi (mux0_pwr_hi),
.pwr_oe1 (mux0_pwr_oe1),
.pwr_oe2 (mux0_pwr_oe2),
.pwr_oe3 (mux0_pwr_oe3),
.pwr_oe4 (mux0_pwr_oe4),
.debug (mux0_debug)
);
`endif
// LF edge detect (generic)
`ifdef WITH_LF1
lo_edge_detect le(
.pck0 (pck0),
.pck_divclk (pck_divclk),
.adc_d (adc_d),
.cross_lo (cross_lo),
.lf_field (conf_word[0]),
.lf_ed_toggle_mode (conf_word[1]),
.lf_ed_threshold (lf_ed_threshold),
.ssp_dout (ssp_dout),
.ssp_frame (mux1_ssp_frame),
.ssp_clk (mux1_ssp_clk),
.adc_clk (mux1_adc_clk),
.pwr_lo (mux1_pwr_lo),
.pwr_hi (mux1_pwr_hi),
.pwr_oe1 (mux1_pwr_oe1),
.pwr_oe2 (mux1_pwr_oe2),
.pwr_oe3 (mux1_pwr_oe3),
.pwr_oe4 (mux1_pwr_oe4),
.debug (mux1_debug)
);
`endif
// LF passthrough
`ifdef WITH_LF2
lo_passthru lp(
.pck_divclk (pck_divclk),
.cross_lo (cross_lo),
.ssp_dout (ssp_dout),
.ssp_din (mux2_ssp_din),
.adc_clk (mux2_adc_clk),
.pwr_lo (mux2_pwr_lo),
.pwr_hi (mux2_pwr_hi),
.pwr_oe1 (mux2_pwr_oe1),
.pwr_oe2 (mux2_pwr_oe2),
.pwr_oe3 (mux2_pwr_oe3),
.pwr_oe4 (mux2_pwr_oe4),
.debug (mux2_debug)
);
`endif
// LF ADC (read/write)
`ifdef WITH_LF3
lo_adc la(
.pck0 (pck0),
.adc_d (adc_d),
.divisor (divisor),
.lf_field (conf_word[0]),
.ssp_dout (ssp_dout),
.ssp_din (mux3_ssp_din),
.ssp_frame (mux3_ssp_frame),
.ssp_clk (mux3_ssp_clk),
.adc_clk (mux3_adc_clk),
.pwr_lo (mux3_pwr_lo ),
.pwr_hi (mux3_pwr_hi ),
.pwr_oe1 (mux3_pwr_oe1),
.pwr_oe2 (mux3_pwr_oe2),
.pwr_oe3 (mux3_pwr_oe3),
.pwr_oe4 (mux3_pwr_oe4),
.debug (mux3_debug)
);
`endif // WITH_LF3
assign mux6_pwr_lo = 1'b1;
// 7 -- SPARE
`else // if WITH_LF not defined
// ############################################################################
// # Enable High Frequency Modules
// HF reader
`ifdef WITH_HF0
`ifdef WITH_HF_15
hi_reader_15 hr(
`else
hi_reader hr(
`endif
.ck_1356meg (ck_1356megb),
.adc_d (adc_d),
.subcarrier_frequency (conf_word[5:4]),
.minor_mode (conf_word[3:0]),
.ssp_dout (ssp_dout),
.ssp_din (mux0_ssp_din),
.ssp_frame (mux0_ssp_frame),
.ssp_clk (mux0_ssp_clk),
.adc_clk (mux0_adc_clk),
.pwr_lo (mux0_pwr_lo),
.pwr_hi (mux0_pwr_hi),
.pwr_oe1 (mux0_pwr_oe1),
.pwr_oe2 (mux0_pwr_oe2),
.pwr_oe3 (mux0_pwr_oe3),
.pwr_oe4 (mux0_pwr_oe4),
.debug (mux0_debug)
);
`endif // WITH_HF0
// HF simulated tag
`ifdef WITH_HF1
hi_simulate hs(
.ck_1356meg (ck_1356meg),
.adc_d (adc_d),
.mod_type (conf_word[3:0]),
.ssp_dout (ssp_dout),
.ssp_din (mux1_ssp_din),
.ssp_frame (mux1_ssp_frame),
.ssp_clk (mux1_ssp_clk),
.adc_clk (mux1_adc_clk),
.pwr_lo (mux1_pwr_lo),
.pwr_hi (mux1_pwr_hi),
.pwr_oe1 (mux1_pwr_oe1),
.pwr_oe2 (mux1_pwr_oe2),
.pwr_oe3 (mux1_pwr_oe3),
.pwr_oe4 (mux1_pwr_oe4),
.debug (mux1_debug)
);
`endif // WITH_HF1
// HF ISO14443-A
`ifdef WITH_HF2
hi_iso14443a hisn(
.ck_1356meg (ck_1356meg),
.adc_d (adc_d),
.mod_type (conf_word[3:0]),
.ssp_dout (ssp_dout),
.ssp_din (mux2_ssp_din),
.ssp_frame (mux2_ssp_frame),
.ssp_clk (mux2_ssp_clk),
.adc_clk (mux2_adc_clk),
.pwr_lo (mux2_pwr_lo),
.pwr_hi (mux2_pwr_hi),
.pwr_oe1 (mux2_pwr_oe1),
.pwr_oe2 (mux2_pwr_oe2),
.pwr_oe3 (mux2_pwr_oe3),
.pwr_oe4 (mux2_pwr_oe4),
.debug (mux2_debug)
);
`endif // WITH_HF2
// HF sniff
`ifdef WITH_HF3
hi_sniffer he(
.ck_1356meg (ck_1356megb),
.adc_d (adc_d),
.ssp_din (mux3_ssp_din),
.ssp_frame (mux3_ssp_frame),
.ssp_clk (mux3_ssp_clk),
.adc_clk (mux3_adc_clk),
.pwr_lo (mux3_pwr_lo),
.pwr_hi (mux3_pwr_hi),
.pwr_oe1 (mux3_pwr_oe1),
.pwr_oe2 (mux3_pwr_oe2),
.pwr_oe3 (mux3_pwr_oe3),
.pwr_oe4 (mux3_pwr_oe4)
);
`endif //WITH_HF3
// HF ISO18092 FeliCa
`ifdef WITH_HF4
hi_flite hfl(
.ck_1356meg (ck_1356megb),
.adc_d (adc_d),
.mod_type (conf_word[3:0]),
.ssp_dout (ssp_dout),
.ssp_din (mux4_ssp_din),
.ssp_frame (mux4_ssp_frame),
.ssp_clk (mux4_ssp_clk),
.adc_clk (mux4_adc_clk),
.pwr_lo (mux4_pwr_lo),
.pwr_hi (mux4_pwr_hi),
.pwr_oe1 (mux4_pwr_oe1),
.pwr_oe2 (mux4_pwr_oe2),
.pwr_oe3 (mux4_pwr_oe3),
.pwr_oe4 (mux4_pwr_oe4),
.debug (mux4_debug)
);
`endif // WITH_HF4
// HF get trace
`ifdef WITH_HF5
hi_get_trace gt(
.ck_1356megb (ck_1356megb),
.adc_d (adc_d),
.trace_enable (trace_enable),
.major_mode (conf_word[8:6]),
.ssp_din (mux5_ssp_din),
.ssp_frame (mux5_ssp_frame),
.ssp_clk (mux5_ssp_clk)
);
`endif // WITH_HF5
`endif // WITH_LF
// These assignments must agree with the defines in fpgaloader.h
// Major modes Low Frequency
// mux0 = LF reader (generic)
// mux1 = LF edge detect (generic)
// mux2 = LF passthrough
// mux3 = LF ADC (read/write)
// mux4 = SPARE
// mux5 = SPARE
// mux6 = SPARE
// mux7 = FPGA_MAJOR_MODE_OFF
// Major modes High Frequency
// mux0 = HF reader
// mux1 = HF simulated tag
// mux2 = HF ISO14443-A
// mux3 = HF sniff
// mux4 = HF ISO18092 FeliCa
// mux5 = HF get trace
// mux6 = unused
// mux7 = FPGA_MAJOR_MODE_OFF
mux8 mux_ssp_clk (.sel(conf_word[8:6]), .y(ssp_clk ), .x0(mux0_ssp_clk ), .x1(mux1_ssp_clk ), .x2(mux2_ssp_clk ), .x3(mux3_ssp_clk ), .x4(mux4_ssp_clk ), .x5(mux5_ssp_clk ), .x6(mux6_ssp_clk ), .x7(mux7_ssp_clk ) );
mux8 mux_ssp_din (.sel(conf_word[8:6]), .y(ssp_din ), .x0(mux0_ssp_din ), .x1(mux1_ssp_din ), .x2(mux2_ssp_din ), .x3(mux3_ssp_din ), .x4(mux4_ssp_din ), .x5(mux5_ssp_din ), .x6(mux6_ssp_din ), .x7(mux7_ssp_din ) );
mux8 mux_ssp_frame (.sel(conf_word[8:6]), .y(ssp_frame), .x0(mux0_ssp_frame), .x1(mux1_ssp_frame), .x2(mux2_ssp_frame), .x3(mux3_ssp_frame), .x4(mux4_ssp_frame), .x5(mux5_ssp_frame), .x6(mux6_ssp_frame), .x7(mux7_ssp_frame) );
mux8 mux_pwr_oe1 (.sel(conf_word[8:6]), .y(pwr_oe1 ), .x0(mux0_pwr_oe1 ), .x1(mux1_pwr_oe1 ), .x2(mux2_pwr_oe1 ), .x3(mux3_pwr_oe1 ), .x4(mux4_pwr_oe1 ), .x5(mux5_pwr_oe1 ), .x6(mux6_pwr_oe1 ), .x7(mux7_pwr_oe1 ) );
mux8 mux_pwr_oe2 (.sel(conf_word[8:6]), .y(pwr_oe2 ), .x0(mux0_pwr_oe2 ), .x1(mux1_pwr_oe2 ), .x2(mux2_pwr_oe2 ), .x3(mux3_pwr_oe2 ), .x4(mux4_pwr_oe2 ), .x5(mux5_pwr_oe2 ), .x6(mux6_pwr_oe2 ), .x7(mux7_pwr_oe2 ) );
mux8 mux_pwr_oe3 (.sel(conf_word[8:6]), .y(pwr_oe3 ), .x0(mux0_pwr_oe3 ), .x1(mux1_pwr_oe3 ), .x2(mux2_pwr_oe3 ), .x3(mux3_pwr_oe3 ), .x4(mux4_pwr_oe3 ), .x5(mux5_pwr_oe3 ), .x6(mux6_pwr_oe3 ), .x7(mux7_pwr_oe3 ) );
mux8 mux_pwr_oe4 (.sel(conf_word[8:6]), .y(pwr_oe4 ), .x0(mux0_pwr_oe4 ), .x1(mux1_pwr_oe4 ), .x2(mux2_pwr_oe4 ), .x3(mux3_pwr_oe4 ), .x4(mux4_pwr_oe4 ), .x5(mux5_pwr_oe4 ), .x6(mux6_pwr_oe4 ), .x7(mux7_pwr_oe4 ) );
mux8 mux_pwr_lo (.sel(conf_word[8:6]), .y(pwr_lo ), .x0(mux0_pwr_lo ), .x1(mux1_pwr_lo ), .x2(mux2_pwr_lo ), .x3(mux3_pwr_lo ), .x4(mux4_pwr_lo ), .x5(mux5_pwr_lo ), .x6(mux6_pwr_lo ), .x7(mux7_pwr_lo ) );
mux8 mux_pwr_hi (.sel(conf_word[8:6]), .y(pwr_hi ), .x0(mux0_pwr_hi ), .x1(mux1_pwr_hi ), .x2(mux2_pwr_hi ), .x3(mux3_pwr_hi ), .x4(mux4_pwr_hi ), .x5(mux5_pwr_hi ), .x6(mux6_pwr_hi ), .x7(mux7_pwr_hi ) );
mux8 mux_adc_clk (.sel(conf_word[8:6]), .y(adc_clk ), .x0(mux0_adc_clk ), .x1(mux1_adc_clk ), .x2(mux2_adc_clk ), .x3(mux3_adc_clk ), .x4(mux4_adc_clk ), .x5(mux5_adc_clk ), .x6(mux6_adc_clk ), .x7(mux7_adc_clk ) );
mux8 mux_dbg (.sel(conf_word[8:6]), .y(dbg ), .x0(mux0_debug ), .x1(mux1_debug ), .x2(mux2_debug ), .x3(mux3_debug ), .x4(mux4_debug ), .x5(mux5_debug ), .x6(mux6_debug ), .x7(mux7_debug ) );
endmodule