proxmark3/doc/cheatsheet.md

# Command Cheat Sheet
<a id="Top"></a>

|Generic|Low Frequence 125 kHz|High Frequence 13.56 MHz|
|---|---|---|
|[Generic](#Generic)|[T55XX](#T55XX)|[Mifare](#Mifare)|
|[Data](#Data)|[HID Prox](#HID-Prox)|[iClass](#iClass)|
|[Memory](#Memory)|[Indala](#Indala)||
|[Sim Module](#Sim-Module)|[Hitag](#Hitag)||
|[Lua Scripts](#Lua-Scripts)|||
|[Smart Card](#Smart-Card)|||
|[Wiegand convertion](#Wiegand-manipulation)|||

## Generic
^[Top](#top)

Identify High Frequency cards
```
pm3 --> hf search
```

Identify Low Frequency cards
```
pm3 --> lf search
```

Measure antenna characteristics, LF/HF voltage should be around 20-45+ V
```
pm3 --> hw tune
```

Check versioning
```
pm3 --> hw version
```

Check overall status
```
pm3 --> hw status
```

## iClass
^[Top](#top)

Reverse permute iClass master key
```
Options
---
r          reverse permuted key

pm3 --> hf iclass permute r 3F90EBF0910F7B6F
```

iClass Reader
```
pm3 --> hf iclass reader
```

Dump iClass card contents
```
Options
---
k <Key>      : *Access Key as 16 hex symbols or 1 hex to select key from memory

m3 --> hf iclass dump k 0
```

Read iClass Block
```
Options
---
b <Block>  : The block number as 2 hex symbols
k <Key>    : Access Key as 16 hex symbols or 1 hex to select key from memory

pm3 --> hf iclass rdbl b 7 k 0
```

Write to iClass Block
```
Options
---
b <Block>  : The block number as 2 hex symbols
d <data>   : Set the Data to write as 16 hex symbols
k <Key>    : Access Key as 16 hex symbols or 1 hex to select key from memory

pm3 --> hf iclass wrbl b 07 d 6ce099fe7e614fd0 k 0
```

Print keystore
```
Options
---
p           : print keys loaded into memory

pm3 --> hf iclass managekeys p
```

Add key to keystore [0-7]
```
Options
---
n <keynbr>    : specify the keyNbr to set in memory
k <key>       : set a key in memory

pm3 --> hf iclass managekeys n 0 k AFA785A7DAB33378
```

Encrypt iClass Block
```
pm3 --> hf iclass encrypt 0000000f2aa3dba8
```

Load iClass dump into memory for simulation
```
Options
---
f <filename>     : load iclass tag-dump filename

pm3 --> hf iclass eload f hf-iclass-db883702f8ff12e0.bin
```

Simulate iClass
```
Options
---
0 <CSN>     simulate the given CSN
2           Runs part 1 of LOCLASS attack
1           simulate default CSN
3           Full simulation using emulator memory (see 'hf iclass eload')

pm3 --> hf iclass sim 3
```

Clone iClass Legacy Sequence
```
pm3 --> hf iclass rdbl b 7 k 0
pm3 --> hf iclass wrbl b 7 d 6ce099fe7e614fd0 k 0
```

Simulate iClass Sequence
```
pm3 --> hf iclass dump k 0
pm3 --> hf iclass eload f hf-iclass-db883702f8ff12e0.bin
pm3 --> hf iclass sim 3
```

Extract custom iClass key (loclass attack)
```
Options
---
f <filename>   : specify a filename to clone from
k <Key>        : Access Key as 16 hex symbols or 1 hex to select key from memory
e              : If 'e' is specified, elite computations applied to key

pm3 --> hf iclass sim 2
pm3 --> hf iclass loclass f iclass_mac_attack.bin
pm3 --> hf iclass dump k <Kcus> e
```

Verify custom iClass key
```
Options
---
f <filename> : Dictionary file with default iclass keys
u            : CSN
p            : EPURSE
m            : macs
e            : elite

pm3 --> hf iclass lookup u 010a0ffff7ff12e0 p feffffffffffffff m 66348979153c41b9 f iclass_default_keys e
```

## Mifare
^[Top](#top)

Check for default keys
```
Options
---
<*card memory> <key type (A/B/?)> [t|d|s|ss] <dic (*.dic)>
*              : all sectors
card memory    : 0 - MINI(320 bytes), 1 - 1K, 2 - 2K, 4 - 4K
d              : write keys to binary file

pm3 --> hf mf chk *1 ? d mfc_default_keys
```

Check for default keys from local memory
```
Options
---
card memory   : 0 - MINI(320 bytes), 1 - 1K, 2 - 2K, 4 - 4K
m             : use dictionary from flashmemory

pm3 --> hf mf fchk 1 m
```

Dump Mifare card contents
```
Options
---
<card memory> : 0 = 320 bytes (Mifare Mini), 1 = 1K (default), 2 = 2K, 4 = 4K
k <name>      : key filename, if no <name> given, UID will be used as filename"
f <name>      : data filename, if no <name> given, UID will be used as filename

pm3 --> hf mf dump 1
pm3 --> hf mf dump 1 k hf-mf-A29558E4-key.bin f hf-mf-A29558E4-data.bin
```

Convert .bin to .eml
```
Options
---
i <file>     : Specifies the dump-file (input). If omitted, 'dumpdata.bin' is used

pm3 --> script run dumptoemul -i dumpdata.bin
```

Write to Mifare block
```
Options
---
<block number> <key A/B> <key (12 hex symbols)> <block data (32 hex symbols)>

pm3 --> hf mf wrbl 0 A FFFFFFFFFFFF d3a2859f6b880400c801002000000016
```

Run autopwn
```
Options
---

pm3 --> hf mf autopwn
```

Run Hardnested attack
```
Options
---
<block number> <key A|B> <key (12 hex symbols)> <target block number> <target key A|B> [known target key (12 hex symbols)] [w] [s]
w          : Acquire nonces and write them to binary file nonces.bin

pm3 --> hf mf hardnested 0 A 8829da9daf76 0 A w
```

Load Mifare emul dump file into memory for simulation
```
Options
---
<card memory> <file name w/o `.eml`>
[card memory]: 0 = 320 bytes (Mifare Mini), 1 = 1K (default), 2 = 2K, 4 = 4K, u = UL

pm3 --> hf mf eload hf-mf-353C2AA6
pm3 --> hf mf eload 1 hf-mf-353C2AA6
```

Simulate Mifare
```
u     : (Optional) UID 4,7 or 10 bytes. If not specified, the UID 4B from emulator memory will be used

pm3 --> hf mf sim u 353c2aa6
```

Simulate Mifare Sequence
```
pm3 --> hf mf chk *1 ? d mfc_default_keys
pm3 --> hf mf dump 1
pm3 --> script run dumptoemul -i dumpdata.bin
pm3 --> hf mf eload 353C2AA6
pm3 --> hf mf sim u 353c2aa6
```

Clone Mifare 1K Sequence
```
pm3 --> hf mf chk *1 ? d mfc_default_keys
pm3 --> hf mf dump
pm3 --> hf mf restore 1 u 4A6CE843 k hf-mf-A29558E4-key.bin f hf-mf-A29558E4-data.bin
```

## Wiegand manipulation
^[Top](#top)

List all available weigand formats in client
```
pm3 --> wiegand list
```

Convert Site & Facility code to Wiegand raw hex
```
Options
---
w <format> o <OEM> f <FC> c <CN> i <issuelevel>
w            : wiegand format to use
o            : OEM number / site code
f            : facility code
c            : card number
i            : issue level

pm3 --> wiegand encode 0 56 150
```

Convert Site & Facility code from Wiegand raw hex to numbers
```
Options
---
p            : ignore parity errors

pm3 --> wiegand decode 2006f623ae
```

## HID Prox
^[Top](#top)

Read HID Prox card
```
pm3 --> lf hid read
```

Demodulate HID Prox card
```
pm3 --> lf hid demod
```

Simulate Prox card
```

pm3 --> lf hid sim 200670012d
```

Clone Prox to T5577 card
```
pm3 --> lf hid clone 200670012d
```

Brute force HID reader
```
Options
---
a <format>        :  26|33|34|35|37|40|44|84
f <facility-code> :  8-bit value HID facility code
c <cardnumber>    :  (optional) cardnumber to start with, max 65535
d <delay>         :  delay betweens attempts in ms. Default 1000ms
v                 :  verbose logging, show all tries

pm3 --> lf hid brute a 26 f 224
pm3 --> lf hid brute v a 26 f 21 c 200 d 2000
```

## Indala
^[Top](#top)

Read Indala card
```
pm3 --> lf indala read
```

Demodulate Indala card
```
pm3 --> lf indala demod
```

Simulate Indala card
```
Options
---
<uid> :  64/224 UID

pm3 --> lf indala sim a0000000c2c436c1
```

Clone to T55x7 card
```
Options
---
<uid> :  64/224 UID

pm3 --> lf indala clone a0000000c2c436c1
```

## Hitag
^[Top](#top)

Read Hitag information
```
pm3 --> lf hitag info
```

Act as Hitag reader
```
Options
---
HitagS:
01 <nr> <ar>    : Read all pages, challenge mode
02 <key>        : Read all pages, crypto mode. Set key=0 for no auth

Hitag2:
21 <password>   : Read all pages, password mode. Default: 4D494B52 ("MIKR")
22 <nr> <ar>    : Read all pages, challenge mode
23 <key>        : Read all pages, crypto mode. Key format: ISK high + ISK low. Default: 4F4E4D494B52 ("ONMIKR")
25              : Test recorded authentications
26              : Just read UID

pm3 --> lf hitag 26
pm3 --> lf hitag 21 4D494B52
```

Sniff Hitag traffic
```
pm3 --> lf hitag sniff
pm3 --> lf hitag list
```

Simulate Hitag
```
pm3 --> lf hitag sim c378181c_a8f7.ht2
```

Write to Hitag block
```
Options
---
HitagS:
03 <nr,ar> <page> <byte0...byte3>     : Write page, challenge mode
04 <key> <page> <byte0...byte3>       : Write page, crypto mode. Set key=0 for no auth

Hitag2:
24  <key> <page> <byte0...byte3>      : Write page, crypto mode. Key format: ISK high + ISK low.
27  <password> <page> <byte0...byte3> : Write page, password mode. Default: 4D494B52 ("MIKR")

pm3 --> lf hitag writer 24 499602D2 1 00000000
```

Simulate Hitag2 sequence
```
pm3 --> lf hitag reader 21 56713368
pm3 --> lf hitag sim c378181c_a8f7.ht2
```

## T55XX
^[Top](#top)

Detect T55XX card
```
pm3 --> lf t55xx detect
```

Configure modulation
```
Options
---
<FSK|FSK1|FSK1a|FSK2|FSK2a|ASK|PSK1|PSK2|NRZ|BI|BIa>  : Set modulation
EM is ASK
HID Prox is FSK
Indala is PSK

pm3 --> lf t55xx config FSK
```

Set timings to default
```
Options
---
p            : persist to flashmemory
z            : Set default t55x7 timings (use p to save if required)

pm3 --> lf t55xx deviceconfig z p
```

Write to T55xx block
```
b <block>    : block number to write. Between 0-7
d <data>     : 4 bytes of data to write (8 hex characters)

pm3 --> lf t55xx wr b 0 d 00081040
```

Wipe a T55xx tag and set defaults
```
pm3 --> lf t55xx wipe
```

## Data
^[Top](#top)

Get raw samples [512-40000]
```
pm3 --> data samples <size>
```

Save samples to file
```
pm3 --> data save <filename>
```

Load samples from file
```
pm3 --> data load <filename>
```

## Lua Scripts
^[Top](#top)

List Lua Scripts

```
pm3 --> script list
```

Convert .bin to .eml
```
Options
---
i <file>    : Specifies the dump-file (input). If omitted, 'dumpdata.bin' is used

pm3 --> script run dumptoemul -i xxxxxxxxxxxxxx.bin
```

Format Mifare card
```
Options
---
k <key>       : the current six byte key with write access
n <key>       : the new key that will be written to the card
a <access>    : the new access bytes that will be written to the card
x             : execute the commands aswell.

pm3 --> script run formatMifare -k FFFFFFFFFFFF -n FFFFFFFFFFFF -x
```

## Memory
^[Top](#top)

Load default keys into memory
```
Options
---
o <offset>         : offset in memory
f <filename>       : file name
m                  : upload 6 bytes keys (mifare key dictionary)
i                  : upload 8 bytes keys (iClass key dictionary)
t                  : upload 4 bytes keys (pwd dictionary)

pm3 --> mem load f mfc_default_keys m
pm3 --> mem load f t55xx_default_pwds t
pm3 --> mem load f iclass_default_keys i
```

## Sim Module
^[Top](#top)

Upgrade Sim Module firmware
```
pm3 --> sc upgrade f ../tools/simmodule/sim011.bin
```

## Smart Card
^[Top](#top)

Get Smart Card Information
```
pm3 --> sc info
```

Act like an IS07816 reader
```
pm3 --> sc reader
```

Set clock speed
```
Options
---
c <speed>       : clockspeed (0 = 16MHz, 1=8MHz, 2=4MHz)

pm3 --> sc setclock c 2
```

Send raw hex data
```
Options
---
r           : do not read response
a           : active smartcard without select (reset sc module)
s           : active smartcard with select (get ATR)
t           : executes TLV decoder if it possible
0           : use protocol T=0
d <bytes>   : bytes to send

pm3 --> sc raw s 0 d 00a404000e315041592e5359532e4444463031 : 1PAY.SYS.DDF01 PPSE directory with get ATR
pm3 --> sc raw 0 d 00a404000e325041592e5359532e4444463031   : 2PAY.SYS.DDF01 PPSE directory
pm3 --> sc raw 0 t d 00a4040007a0000000041010               : Mastercard
pm3 --> sc raw 0 t d 00a4040007a0000000031010               : Visa
````

Bruteforce SPI
```
Options
---
t          : executes TLV decoder if it possible

pm3 --> sc brute
pm3 --> sc brute t
```