proxmark3/common/iso15693tools.h

115 lines
4.6 KiB
C
Raw Normal View History

//-----------------------------------------------------------------------------
2022-01-07 08:58:03 +08:00
// Copyright (C) Proxmark3 contributors. See AUTHORS.md for details.
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// See LICENSE.txt for the text of the license.
//-----------------------------------------------------------------------------
// ISO15693 other commons
//-----------------------------------------------------------------------------
#ifndef ISO15693_H__
#define ISO15693_H__
#include "common.h"
// REQUEST FLAGS
2019-03-10 02:19:50 +08:00
#define ISO15_REQ_SUBCARRIER_SINGLE 0x00 // Tag should respond using one subcarrier (ASK)
#define ISO15_REQ_SUBCARRIER_TWO 0x01 // Tag should respond using two subcarriers (FSK)
#define ISO15_REQ_DATARATE_LOW 0x00 // Tag should respond using low data rate
#define ISO15_REQ_DATARATE_HIGH 0x02 // Tag should respond using high data rate
#define ISO15_REQ_NONINVENTORY 0x00
#define ISO15_REQ_INVENTORY 0x04 // This is an inventory request - see inventory flags
#define ISO15_REQ_PROTOCOL_NONEXT 0x00
#define ISO15_REQ_PROTOCOL_EXT 0x08 // RFU
// REQUEST FLAGS when INVENTORY is not set
2019-03-10 02:19:50 +08:00
#define ISO15_REQ_SELECT 0x10 // only selected cards response
#define ISO15_REQ_ADDRESS 0x20 // this req contains an address
#define ISO15_REQ_OPTION 0x40 // Command specific option selector
//REQUEST FLAGS when INVENTORY is set
2019-03-10 02:19:50 +08:00
#define ISO15_REQINV_AFI 0x10 // AFI Field is present
#define ISO15_REQINV_SLOT1 0x20 // 1 Slot
#define ISO15_REQINV_SLOT16 0x00 // 16 Slots
#define ISO15_REQINV_OPTION 0x40 // Command specific option selector
//RESPONSE FLAGS
2019-03-10 02:19:50 +08:00
#define ISO15_RES_ERROR 0x01
2021-10-10 07:35:38 +08:00
#define ISO15_RES_EXT 0x08 // Protocol Extension
// RESPONSE ERROR CODES
2019-03-10 02:19:50 +08:00
#define ISO15_NOERROR 0x00
#define ISO15_ERROR_CMD_NOT_SUP 0x01 // Command not supported
#define ISO15_ERROR_CMD_NOT_REC 0x02 // Command not recognized (eg. parameter error)
#define ISO15_ERROR_CMD_OPTION 0x03 // Command option not supported
#define ISO15_ERROR_GENERIC 0x0F // No additional Info about this error
#define ISO15_ERROR_BLOCK_UNAVAILABLE 0x10
#define ISO15_ERROR_BLOCK_LOCKED_ALREADY 0x11 // cannot lock again
#define ISO15_ERROR_BLOCK_LOCKED 0x12 // cannot be changed
#define ISO15_ERROR_BLOCK_WRITE 0x13 // Writing was unsuccessful
#define ISO15_ERROR_BLOCL_WRITELOCK 0x14 // Locking was unsuccessful
//-----------------------------------------------------------------------------
// Map a sequence of octets (~layer 2 command) into the set of bits to feed
// to the FPGA, to transmit that command to the tag.
// Mode: highspeed && one subcarrier (ASK)
//-----------------------------------------------------------------------------
2019-03-10 07:00:59 +08:00
// The sampling rate is 106.353 ksps/s, for T = 18.8 us
2019-03-10 07:00:59 +08:00
// SOF defined as
// 1) Unmodulated time of 56.64us
2019-08-06 19:51:10 +08:00
// 2) 24 pulses of 423.75kHz
// 3) logic '1' (unmodulated for 18.88us followed by 8 pulses of 423.75kHz)
2019-03-10 07:00:59 +08:00
static const int Iso15693FrameSOF[] = {
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
2020-01-13 00:28:12 +08:00
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
-1, -1, -1, -1,
-1, -1, -1, -1,
1, 1, 1, 1,
1, 1, 1, 1
};
2019-03-10 07:00:59 +08:00
static const int Iso15693Logic0[] = {
1, 1, 1, 1,
1, 1, 1, 1,
-1, -1, -1, -1,
-1, -1, -1, -1
};
static const int Iso15693Logic1[] = {
-1, -1, -1, -1,
2020-01-13 00:28:12 +08:00
-1, -1, -1, -1,
1, 1, 1, 1,
1, 1, 1, 1
};
2019-03-10 07:00:59 +08:00
// EOF defined as
2019-08-06 19:51:10 +08:00
// 1) logic '0' (8 pulses of 423.75kHz followed by unmodulated for 18.88us)
// 2) 24 pulses of 423.75kHz
2019-03-10 07:00:59 +08:00
// 3) Unmodulated time of 56.64us
static const int Iso15693FrameEOF[] = {
1, 1, 1, 1,
1, 1, 1, 1,
-1, -1, -1, -1,
-1, -1, -1, -1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1
};
char *iso15693_sprintUID(char *dest, uint8_t *uid);
2019-03-12 07:12:26 +08:00
#endif