proxmark3/include/usart_defs.h

#ifndef __USART_DEFS_H
#define __USART_DEFS_H

//#define USART_BAUD_RATE 9600
#define USART_BAUD_RATE 115200
// BT HC-06 physical layer runs at 128kbps
// so it's possible to gain a little bit by using 230400
// with some risk to overflow its internal buffers:
//#define USART_BAUD_RATE 230400

#define USART_BUFFLEN 512
#define USART_FIFOLEN (2*USART_BUFFLEN)

// Higher baudrates are pointless, only increasing overflow risk

#define USART_PARITY 'N'

#if defined (_WIN32)
#define SERIAL_PORT_EXAMPLE_H   "com3"
#elif defined(__APPLE__)
#define SERIAL_PORT_EXAMPLE_H   "/dev/tty.usbmodemiceman1"
#else
#define SERIAL_PORT_EXAMPLE_H   "/dev/ttyACM0"
#endif

#endif
summer restructuring: * .h include only the strict minimum for their own parsing * this forces all files to include explicitment their needs and not count on far streched dependencies * this helps Makefile to rebuild only the minimum * according to this rule, most standalone .h are now gone * big app.h is gone * remove seldom __cplusplus, if c++ happens, everything will have to be done properly anyway * all unrequired include were removed * split common/ into common/ (client+arm) and common_arm/ (os+bootloader) * bring zlib to common/ * bring stuff not really/not yet used in common back to armsrc/ or client/ * bring liblua into client/ * bring uart into client/ * move some portions of code around (dbprint, protocols,...) * rename unused files into _disabled.[ch] to make it explicit rename soft Uarts between 14a, 14b and iclass, so a standalone could use several without clash * remove PrintAndLogDevice * move deprecated-hid-flasher from client to tools * Makefiles * treat deps in armsrc/ as in client/ * client: stop on warning (-Werror), same as for armsrc/ Tested on: * all standalone modes * Linux 2019-08-08 22:57:33 +08:00			`#ifndef __USART_DEFS_H`
			`#define __USART_DEFS_H`
Fix: USART - better RX/TX with one dma bank and wait loops (@ryan) 2019-04-14 17:08:44 +08:00
usart working... when debugged... 2019-04-21 01:17:32 +08:00			`//#define USART_BAUD_RATE 9600`
			`#define USART_BAUD_RATE 115200`
clarify usart baudrates 2019-06-13 05:59:00 +08:00			`// BT HC-06 physical layer runs at 128kbps`
			`// so it's possible to gain a little bit by using 230400`
			`// with some risk to overflow its internal buffers:`
baudrate 230400 works good on PM3 device communicating with BT add-on (Blue Shark) 2019-05-18 23:56:46 +08:00			`//#define USART_BAUD_RATE 230400`
clarify usart baudrates 2019-06-13 05:59:00 +08:00
summer restructuring: * .h include only the strict minimum for their own parsing * this forces all files to include explicitment their needs and not count on far streched dependencies * this helps Makefile to rebuild only the minimum * according to this rule, most standalone .h are now gone * big app.h is gone * remove seldom __cplusplus, if c++ happens, everything will have to be done properly anyway * all unrequired include were removed * split common/ into common/ (client+arm) and common_arm/ (os+bootloader) * bring zlib to common/ * bring stuff not really/not yet used in common back to armsrc/ or client/ * bring liblua into client/ * bring uart into client/ * move some portions of code around (dbprint, protocols,...) * rename unused files into _disabled.[ch] to make it explicit rename soft Uarts between 14a, 14b and iclass, so a standalone could use several without clash * remove PrintAndLogDevice * move deprecated-hid-flasher from client to tools * Makefiles * treat deps in armsrc/ as in client/ * client: stop on warning (-Werror), same as for armsrc/ Tested on: * all standalone modes * Linux 2019-08-08 22:57:33 +08:00			`#define USART_BUFFLEN 512`
			`#define USART_FIFOLEN (2*USART_BUFFLEN)`

clarify usart baudrates 2019-06-13 05:59:00 +08:00			`// Higher baudrates are pointless, only increasing overflow risk`
chg: add fractional for 921600, 1382400 baudrate 2019-05-19 03:40:45 +08:00
Add usart btfactory 2019-05-15 08:15:19 +08:00			`#define USART_PARITY 'N'`
usart working... when debugged... 2019-04-21 01:17:32 +08:00
summer restructuring: * .h include only the strict minimum for their own parsing * this forces all files to include explicitment their needs and not count on far streched dependencies * this helps Makefile to rebuild only the minimum * according to this rule, most standalone .h are now gone * big app.h is gone * remove seldom __cplusplus, if c++ happens, everything will have to be done properly anyway * all unrequired include were removed * split common/ into common/ (client+arm) and common_arm/ (os+bootloader) * bring zlib to common/ * bring stuff not really/not yet used in common back to armsrc/ or client/ * bring liblua into client/ * bring uart into client/ * move some portions of code around (dbprint, protocols,...) * rename unused files into _disabled.[ch] to make it explicit rename soft Uarts between 14a, 14b and iclass, so a standalone could use several without clash * remove PrintAndLogDevice * move deprecated-hid-flasher from client to tools * Makefiles * treat deps in armsrc/ as in client/ * client: stop on warning (-Werror), same as for armsrc/ Tested on: * all standalone modes * Linux 2019-08-08 22:57:33 +08:00			`#if defined (_WIN32)`
			`#define SERIAL_PORT_EXAMPLE_H "com3"`
			`#elif defined(__APPLE__)`
Use /dev/tty on OSX rather than /dev/cu See https://stackoverflow.com/questions/8632586/macos-whats-the-difference-between-dev-tty-and-dev-cu/8632603 2019-08-21 05:21:18 +08:00			`#define SERIAL_PORT_EXAMPLE_H "/dev/tty.usbmodemiceman1"`
summer restructuring: * .h include only the strict minimum for their own parsing * this forces all files to include explicitment their needs and not count on far streched dependencies * this helps Makefile to rebuild only the minimum * according to this rule, most standalone .h are now gone * big app.h is gone * remove seldom __cplusplus, if c++ happens, everything will have to be done properly anyway * all unrequired include were removed * split common/ into common/ (client+arm) and common_arm/ (os+bootloader) * bring zlib to common/ * bring stuff not really/not yet used in common back to armsrc/ or client/ * bring liblua into client/ * bring uart into client/ * move some portions of code around (dbprint, protocols,...) * rename unused files into _disabled.[ch] to make it explicit rename soft Uarts between 14a, 14b and iclass, so a standalone could use several without clash * remove PrintAndLogDevice * move deprecated-hid-flasher from client to tools * Makefiles * treat deps in armsrc/ as in client/ * client: stop on warning (-Werror), same as for armsrc/ Tested on: * all standalone modes * Linux 2019-08-08 22:57:33 +08:00			`#else`
			`#define SERIAL_PORT_EXAMPLE_H "/dev/ttyACM0"`
			`#endif`
Fix: USART - better RX/TX with one dma bank and wait loops (@ryan) 2019-04-14 17:08:44 +08:00
add: FPC connector skeleton usart. Not working but if will be a starting point for those who might want to help out with it. 2018-07-30 15:54:44 +08:00			`#endif`