Whats in this fork? I have scraped the web for different enhancements to the PM3 source code and not all of them ever found their way to the master branch.
Among the stuff is
* Jonor's hf 14a raw timing patch
* Piwi's updates. (usually gets into the master)
* Piwi's "topaz" branch
* Piwi's "hardnested" branch
* Holiman's iclass, (usually gets into the master)
* Marshmellow's fixes (usually gets into the master)
Give me a hint, and I'll see if I can't merge in the stuff you have.
I don't actually know how to make small pull-request to github :( and that is the number one reason for me not pushing a lot of things back to the PM3 master.
PM3 GUI:
I do tend to rename and move stuff around, the official PM3-GUI from Gaucho will not work so well. *sorry*
DEVELOPMENT:
This fork is adjusted to compile on windows/mingw environment with Qt5.3.1 & GCC 4.8
For people with linux you will need to patch some source code and some small change to one makefile. If you are lazy, you google the forum and find asper's or holimans makefile or you find your solution below.
GC made updates to allow this to build easily on Ubuntu 14.04.2 LTS.
- See https://github.com/Proxmark/proxmark3/wiki/Ubuntu%20Linux
- Generally speaking, if you're running a "later" Proxmark, installation is very easy.
Get devkitARM release 41 from SourceForge (choose either the 64/32 ¿bit depending on your architecture, it is assumed you know how to check and recognize your architecture):
An old Qt4 version makefile is found here: http://www.icesql.se/proxmark3/code/linuxmakefile.txt but this one doesn't have all new files in it. So I don't recommend it.
January 2015, Sweden
iceman at host iuse.se
The Proxmark 3 is available for purchase (assembled and tested) from the
following locations:
* http://www.elechouse.com (new and revised hardware package 2015)
Most of the ultra-low-volume contract assemblers could put
something like this together with a reasonable yield. A run of around
a dozen units is probably cost-effective. The BOM includes (possibly-
outdated) component pricing, and everything is available from Digikey
and the usual distributors.
If you've never assembled a modern circuit board by hand, then this is
not a good place to start. Some of the components (e.g. the crystals)
must not be assembled with a soldering iron, and require hot air.
The schematics are included; the component values given are not
necessarily correct for all situations, but it should be possible to do
nearly anything you would want with appropriate population options.
The printed circuit board artwork is also available, as Gerbers and an
Excellon drill file.
LICENSING:
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
