2014-03-17 12:41:33 +08:00
|
|
|
NOTICE:
|
2014-03-26 12:12:32 +08:00
|
|
|
(2014-03-26)
|
|
|
|
|
This is now the official Proxmark repository!
|
2014-03-17 12:41:33 +08:00
|
|
|
|
2014-03-26 12:12:32 +08:00
|
|
|
INTRODUCTION:
|
2010-02-23 03:18:49 +08:00
|
|
|
|
2014-03-26 12:12:32 +08:00
|
|
|
The proxmark3 is a powerful general purpose RFID tool, the size of a deck
|
|
|
|
|
of cards, designed to snoop, listen and emulate everything from
|
|
|
|
|
Low Frequency (125kHz) to High Frequency (13.56MHz) tags.
|
2010-02-23 03:18:49 +08:00
|
|
|
|
2014-03-26 12:12:32 +08:00
|
|
|
This repository contains enough software, logic (for the FPGA), and design
|
|
|
|
|
documentation for the hardware that you could, at least in theory,
|
|
|
|
|
do something useful with a proxmark3.
|
|
|
|
|
|
|
|
|
|
RESOURCES:
|
|
|
|
|
|
|
|
|
|
* This repository!
|
|
|
|
|
https://github.com/Proxmark/proxmark3
|
|
|
|
|
|
|
|
|
|
* The Wiki
|
|
|
|
|
https://github.com/Proxmark/proxmark3/wiki
|
|
|
|
|
|
|
|
|
|
* The GitHub page
|
|
|
|
|
http://proxmark.github.io/proxmark3/
|
|
|
|
|
|
|
|
|
|
* The Forum
|
|
|
|
|
http://www.proxmark.org/forum
|
|
|
|
|
|
|
|
|
|
* The IRC chanel
|
|
|
|
|
irc.freenode.org #proxmark3
|
|
|
|
|
-or-
|
|
|
|
|
http://webchat.freenode.net/?channels=#proxmark3
|
|
|
|
|
|
|
|
|
|
DEVELOPMENT:
|
|
|
|
|
|
|
|
|
|
The tools required to build or run the project will vary depending on
|
|
|
|
|
your operating system. Please refer to the Wiki for details.
|
|
|
|
|
|
|
|
|
|
* https://github.com/Proxmark/proxmark3/wiki
|
2010-02-23 03:18:49 +08:00
|
|
|
|
2014-03-26 12:12:32 +08:00
|
|
|
OBTAINING HARDWARE:
|
2010-02-23 03:18:49 +08:00
|
|
|
|
2014-03-26 12:12:32 +08:00
|
|
|
The Proxmark 3 is available for purcahse (assembled and tested) from the
|
|
|
|
|
following locations:
|
2010-02-23 03:18:49 +08:00
|
|
|
|
2014-03-26 12:12:32 +08:00
|
|
|
* http://proxmark3.com/
|
|
|
|
|
* http://www.xfpga.com/
|
2010-02-23 03:18:49 +08:00
|
|
|
|
2014-03-26 12:12:32 +08:00
|
|
|
Most of the ultra-low-volume contract assemblers could put
|
2010-02-23 03:18:49 +08:00
|
|
|
something like this together with a reasonable yield. A run of around
|
|
|
|
|
a dozen units is probably cost-effective. The BOM includes (possibly-
|
|
|
|
|
outdated) component pricing, and everything is available from Digikey
|
|
|
|
|
and the usual distributors.
|
|
|
|
|
|
|
|
|
|
If you've never assembled a modern circuit board by hand, then this is
|
|
|
|
|
not a good place to start. Some of the components (e.g. the crystals)
|
|
|
|
|
must not be assembled with a soldering iron, and require hot air.
|
|
|
|
|
|
|
|
|
|
The schematics are included; the component values given are not
|
|
|
|
|
necessarily correct for all situations, but it should be possible to do
|
|
|
|
|
nearly anything you would want with appropriate population options.
|
|
|
|
|
|
|
|
|
|
The printed circuit board artwork is also available, as Gerbers and an
|
|
|
|
|
Excellon drill file.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LICENSING:
|
|
|
|
|
|
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
|
|
|
it under the terms of the GNU General Public License as published by
|
|
|
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
|
|
|
(at your option) any later version.
|
|
|
|
|
|
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
|
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
GNU General Public License for more details.
|
|
|
|
|
|
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
|
|
|
along with this program; if not, write to the Free Software
|
|
|
|
|
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Jonathan Westhues
|
|
|
|
|
user jwesthues, at host cq.cx
|
|
|
|
|
|
|
|
|
|
May 2007, Cambridge MA
|
|
|
|
|
|
