RfidResearchGroup/proxmark3
1
1
Fork 0
mirror of https://github.com/RfidResearchGroup/proxmark3.git synced 2025-02-15 03:34:22 +08:00
Code Issues Projects Releases Packages Wiki Activity

update btaddon doc

Browse source
This commit is contained in:
Philippe Teuwen 2019-06-02 16:39:50 +02:00
parent 27493a7b90
commit 3cb6912d8e
1 changed files with 27 additions and 7 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

34
doc/bt_manual_v10.md
View file

@ -17,7 +17,7 @@ It can easily connect to Bluetooth mobile phone, portable computer, etc. Without
Built-in battery can support standalone mode, off-line sniffing, off-line reading & simulation, etc. The temperature of the device is stable.
### 2. PARAMETER
### 2. PARAMETERS
* Battery capacity: 400 mAh
* Standby time: 3.5h @ StandBy; 2.9h @ LF-On; 50min @ HF-On;
@ -42,7 +42,32 @@ Built-in battery can support standalone mode, off-line sniffing, off-line readin
<img src="http://www.icedev.se/proxmark3/blueshark/addon_open_1.jpg" alt="Image of blue shark add-on open fit" width="300"><img src="http://www.icedev.se/proxmark3/blueshark/addon_fitted_1.jpg" alt="Image of blue shark add-on fitted" width="300">
</p>
### 4. CONNECT WITH BLUETOOTH
### 4. COMPILATION / FLASHING
Please download the latest source code from Rfid Research Group's Github repo:
https://github.com/RfidResearchGroup/proxmark3
To compile the client and firmware with FPC support, the easiest way is to
1. Copy the sample file: `Makefile.platform.sample` ⇒ `Makefile.platform`
2. Edit `Makefile.platform`, uncomment the line `#PLATFORM_EXTRAS=BTADDON` by removing the `#`
3. Recompile the project:
* `make clean; make -j8`
4. Flash the firmware
You are now ready to run the client with the serial port you got from your BT device on your laptop etc.
See instructions below.
### 5. CONNECT WITH BLUETOOTH
You can have both USB cable connect and BT active at the same time and connect to either serial port.
You can also switch serial port from inside the proxmark3 client using the new command `hw connect`.
### Default settings
1. Serial: `115200 8N1`
2. Name: `PM3_RDV4.0`
3. Pin: `1234`
#### Windows
@ -118,11 +143,6 @@ turn on solid.
./proxmark /dev/ttyUSB0
```
### 5. Compiling / Flashing
Please download the latest source code from Rfid Research Group's Github repo:
https://github.com/RfidResearchGroup/proxmark3
### 6. OTHER NOTES
#### (1) UART and LED behavior