diff --git a/client/flash.c b/client/flash.c
index ab41e090d..732d0ef02 100644
--- a/client/flash.c
+++ b/client/flash.c
@@ -378,12 +378,12 @@ static int wait_for_ack(PacketResponseNG *ack) {
 }
 
 static void flash_suggest_update_bootloader(void) {
-    PrintAndLogEx(ERR, _RED_("It is recommended that you first" _YELLOW_("update your bootloader") " alone,"));
+    PrintAndLogEx(ERR, _RED_("It is recommended that you first " _YELLOW_("update your bootloader") _RED_("alone,")));
     PrintAndLogEx(ERR, _RED_("reboot the Proxmark3 then only update the main firmware") "\n");
 }
 
 static void flash_suggest_update_flasher(void) {
-    PrintAndLogEx(ERR, _RED_("It is recommended that you first" _YELLOW_("update your flasher") ));
+    PrintAndLogEx(ERR, _RED_("It is recommended that you first " _YELLOW_("update your flasher")));
 }
 
 // Go into flashing mode
@@ -418,17 +418,17 @@ int flash_start_flashing(int enable_bl_writes, char *serial_port_name, uint32_t
             flash_suggest_update_bootloader();
             //
         } else if (BL_VERSION_MAJOR(version) < BL_VERSION_MAJOR(FLASHER_VERSION)) {
-            PrintAndLogEx(ERR, _RED_("====================== OBS ! ==================================="));            
+            PrintAndLogEx(ERR, _RED_("====================== OBS ! ==================================="));
             PrintAndLogEx(ERR, _RED_("Note: Your bootloader reported a version older than this flasher"));
             flash_suggest_update_bootloader();
         } else if (BL_VERSION_MAJOR(version) > BL_VERSION_MAJOR(FLASHER_VERSION)) {
-            PrintAndLogEx(ERR, _RED_("====================== OBS ! ========================="));            
+            PrintAndLogEx(ERR, _RED_("====================== OBS ! ========================="));
             PrintAndLogEx(ERR, _RED_("Note: Your bootloader is more recent than this flasher"));
             flash_suggest_update_flasher();
         }
     } else {
         PrintAndLogEx(ERR, _RED_("====================== OBS ! ==========================================="));
-        PrintAndLogEx(ERR, _RED_("Note: Your bootloader does not understand the new" _YELLOW_("CMD_BL_VERSION") " command"));
+        PrintAndLogEx(ERR, _RED_("Note: Your bootloader does not understand the new " _YELLOW_("CMD_BL_VERSION") _RED_("command")));
         flash_suggest_update_bootloader();
     }
 
@@ -437,10 +437,10 @@ int flash_start_flashing(int enable_bl_writes, char *serial_port_name, uint32_t
 
     int mem_avail = chipid_to_mem_avail(chipinfo);
     if (mem_avail != 0) {
-        PrintAndLogEx(NORMAL, "Available memory on this board: %uK bytes\n", mem_avail);
+        PrintAndLogEx(NORMAL, "Available memory on this board: "_YELLOW_("%uK") "bytes\n", mem_avail);
         if (mem_avail > 256) {
             if (BL_VERSION_MAJOR(version) < BL_VERSION_MAJOR(BL_VERSION_1_0_0)) {
-                PrintAndLogEx(ERR, _RED_("====================== OBS ! ======================"));                
+                PrintAndLogEx(ERR, _RED_("====================== OBS ! ======================"));
                 PrintAndLogEx(ERR, _RED_("Your bootloader does not support writing above 256k"));
                 flash_suggest_update_bootloader();
             } else {
@@ -451,7 +451,7 @@ int flash_start_flashing(int enable_bl_writes, char *serial_port_name, uint32_t
     } else {
         PrintAndLogEx(NORMAL, "Available memory on this board: "_RED_("UNKNOWN")"\n");
         PrintAndLogEx(ERR, _RED_("====================== OBS ! ======================================"));
-        PrintAndLogEx(ERR, _RED_("Note: Your bootloader does not understand the new" _YELLOW_("CHIP_INFO") " command"));
+        PrintAndLogEx(ERR, _RED_("Note: Your bootloader does not understand the new " _YELLOW_("CHIP_INFO") _RED_("command")));
         flash_suggest_update_bootloader();
     }
 
@@ -471,7 +471,7 @@ int flash_start_flashing(int enable_bl_writes, char *serial_port_name, uint32_t
         return wait_for_ack(&resp);
     } else {
         PrintAndLogEx(ERR, _RED_("====================== OBS ! ========================================"));
-        PrintAndLogEx(ERR, _RED_("Note: Your bootloader does not understand the new" _YELLOW_("START_FLASH") " command"));
+        PrintAndLogEx(ERR, _RED_("Note: Your bootloader does not understand the new " _YELLOW_("START_FLASH") _RED_("command")));
         flash_suggest_update_bootloader();
     }
     return 0;