mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2024-09-21 15:56:21 +08:00
lf t55 config - now uses cliparser... and texts
This commit is contained in:
iceman1001
parent
0067a9b7fa
commit
827c529aea
|
|
@ -50,7 +50,7 @@ t55xx_conf_block_t config = {
|
|||
.inverted = false,
|
||||
.offset = 0x00,
|
||||
.block0 = 0x00,
|
||||
.block0Status = notSet,
|
||||
.block0Status = NOTSET,
|
||||
.Q5 = false,
|
||||
.usepwd = false,
|
||||
.downlink_mode = refFixedBit
|
||||
|
|
@ -106,27 +106,7 @@ static void arg_add_t55xx_downloadlink(void *at[], uint8_t *idx, uint8_t show, u
|
|||
*idx = n;
|
||||
}
|
||||
|
||||
static int usage_t55xx_config(void) {
|
||||
PrintAndLogEx(NORMAL, "Usage: lf t55xx config [c <blk0>] [d <demodulation>] [i [0/1]] [o <offset>] [Q5 [0/1]] [ST [0/1]]");
|
||||
PrintAndLogEx(NORMAL, "Options:");
|
||||
PrintAndLogEx(NORMAL, " h - This help");
|
||||
PrintAndLogEx(NORMAL, " c <block0> - set configuration from a block0");
|
||||
PrintAndLogEx(NORMAL, " b <8|16|32|40|50|64|100|128> - Set bitrate");
|
||||
PrintAndLogEx(NORMAL, " d <FSK|FSK1|FSK1a|FSK2|FSK2a|ASK|PSK1|PSK2|NRZ|BI|BIa> - Set demodulation FSK / ASK / PSK / NRZ / Biphase / Biphase A");
|
||||
PrintAndLogEx(NORMAL, " i [0/1] - Set/reset data signal inversion");
|
||||
PrintAndLogEx(NORMAL, " o [offset] - Set offset, where data should start decode in bitstream");
|
||||
PrintAndLogEx(NORMAL, " Q5 [0/1] - Set/reset as Q5/T5555 chip instead of T55x7");
|
||||
PrintAndLogEx(NORMAL, " ST [0/1] - Set/reset Sequence Terminator on");
|
||||
PrintAndLogEx(NORMAL, ""); // layout is a little differnet, so seperate until a better fix
|
||||
print_usage_t55xx_downloadlink(T55XX_DLMODE_SINGLE, config.downlink_mode);
|
||||
PrintAndLogEx(NORMAL, "");
|
||||
PrintAndLogEx(NORMAL, "Examples:");
|
||||
PrintAndLogEx(NORMAL, _YELLOW_(" lf t55xx config d FSK") " - FSK demodulation");
|
||||
PrintAndLogEx(NORMAL, _YELLOW_(" lf t55xx config d FSK i 1") " - FSK demodulation, inverse data");
|
||||
PrintAndLogEx(NORMAL, _YELLOW_(" lf t55xx config d FSK i 1 o 3") " - FSK demodulation, inverse data, offset=3,start from position 3 to decode data");
|
||||
PrintAndLogEx(NORMAL, "");
|
||||
return PM3_SUCCESS;
|
||||
}
|
||||
|
||||
static int usage_t55xx_read(void) {
|
||||
PrintAndLogEx(NORMAL, "Usage: lf t55xx read [r <mode>] b <block> [p <password>] [o] <page1>");
|
||||
PrintAndLogEx(NORMAL, "Options:");
|
||||
|
|
@ -489,141 +469,183 @@ void SetConfigWithBlock0Ex(uint32_t block0, uint8_t offset, bool Q5) {
|
|||
}
|
||||
|
||||
static int CmdT55xxSetConfig(const char *Cmd) {
|
||||
|
||||
// No args
|
||||
if (strlen(Cmd) == 0) return printConfiguration(config);
|
||||
if (strlen(Cmd) == 0) {
|
||||
PrintAndLogEx(INFO, "--- " _CYAN_("current t55xx config") " --------------------------");
|
||||
return printConfiguration(config);
|
||||
}
|
||||
|
||||
CLIParserContext *ctx;
|
||||
CLIParserInit(&ctx, "lf t55xx config",
|
||||
"Set/Get T55XX configuration of the pm3 client. Like modulation, inverted, offset, rate etc.\n"
|
||||
"Offset is start position to decode data.",
|
||||
"lf t55xx config --FSK --> FSK demodulation\n"
|
||||
"lf t55xx config --FSK -i --> FSK demodulation, inverse data\n"
|
||||
"lf t55xx config --FSK -i -o 3 --> FSK demodulation, inverse data, offset 3\n"
|
||||
);
|
||||
|
||||
// 1 (help) + 19 (user specified params) + (5 T55XX_DLMODE_SINGLE)
|
||||
void *argtable[1 + 12 + 6 + 5] = {
|
||||
arg_param_begin,
|
||||
arg_lit0(NULL, "FSK", "set demodulation FSK"),
|
||||
arg_lit0(NULL, "FSK1", "set demodulation FSK 1"),
|
||||
arg_lit0(NULL, "FSK1A", "set demodulation FSK 1a (inv)"),
|
||||
arg_lit0(NULL, "FSK2", "set demodulation FSK 2"),
|
||||
arg_lit0(NULL, "FSK2A", "set demodulation FSK 2a (inv)"),
|
||||
arg_lit0(NULL, "ASK", "set demodulation ASK"),
|
||||
arg_lit0(NULL, "PSK1", "set demodulation PSK 1"),
|
||||
arg_lit0(NULL, "PSK2", "set demodulation PSK 2"),
|
||||
arg_lit0(NULL, "PSK3", "set demodulation PSK 3"),
|
||||
arg_lit0(NULL, "NRZ", "set demodulation NRZ"),
|
||||
arg_lit0(NULL, "BI", "set demodulation Biphase"),
|
||||
arg_lit0(NULL, "BIA", "set demodulation Diphase (inverted biphase)"),
|
||||
arg_lit0("i", "inv", "set/reset data signal inversion"),
|
||||
arg_lit0(NULL, "q5", "set/reset as Q5/T5555 chip instead of T55x7"),
|
||||
arg_lit0(NULL, "st", "set/reset Sequence Terminator on"),
|
||||
arg_int0(NULL, "rate", "<dec>", "set bitrate <8|16|32|40|50|64|100|128>"),
|
||||
arg_str0("c", "blk0", "<hex>", "set configuration from a block0 (4 hex bytes)"),
|
||||
arg_int0("o", "offset", "<dec>", "set offset, where data should start decode in bitstream"),
|
||||
};
|
||||
|
||||
uint8_t idx = 19;
|
||||
arg_add_t55xx_downloadlink(argtable, &idx, T55XX_DLMODE_SINGLE, config.downlink_mode);
|
||||
CLIExecWithReturn(ctx, Cmd, argtable, true);
|
||||
|
||||
idx = 1;
|
||||
bool mods[12];
|
||||
int verify_mods = 0;
|
||||
while (idx - 1 < sizeof(mods)) {
|
||||
mods[idx - 1] = arg_get_lit(ctx, idx);
|
||||
verify_mods += mods[idx - 1];
|
||||
idx++;
|
||||
}
|
||||
|
||||
bool invert = arg_get_lit(ctx, idx++);
|
||||
bool use_q5 = arg_get_lit(ctx, idx++);
|
||||
bool use_st = arg_get_lit(ctx, idx++);
|
||||
|
||||
int bitrate = arg_get_int_def(ctx, idx++, -1);
|
||||
|
||||
uint8_t offset = 0, bitRate = 0;
|
||||
char modulation[6] = {0x00};
|
||||
uint8_t rates[9] = {8, 16, 32, 40, 50, 64, 100, 128, 0};
|
||||
uint8_t cmdp = 0;
|
||||
uint8_t downlink_mode = 0;
|
||||
bool errors = false;
|
||||
uint32_t block0 = 0;
|
||||
bool gotconf = false;
|
||||
uint32_t block0 = 0;
|
||||
int res = arg_get_u32_hexstr_def_nlen(ctx, idx++, 0, &block0, 4, true);
|
||||
if (res == 0 || res == 2) {
|
||||
PrintAndLogEx(ERR, "block0 data must be 4 hex bytes");
|
||||
CLIParserFree(ctx);
|
||||
return PM3_EINVARG;
|
||||
}
|
||||
if (res == 1) {
|
||||
gotconf = true;
|
||||
}
|
||||
|
||||
while (param_getchar(Cmd, cmdp) != 0x00 && !errors) {
|
||||
char tmp = tolower(param_getchar(Cmd, cmdp));
|
||||
switch (tmp) {
|
||||
case 'h':
|
||||
return usage_t55xx_config();
|
||||
case 'b':
|
||||
errors |= param_getdec(Cmd, cmdp + 1, &bitRate);
|
||||
if (!errors) {
|
||||
uint8_t i = 0;
|
||||
for (; i < 9; i++) {
|
||||
if (rates[i] == bitRate) {
|
||||
config.bitrate = i;
|
||||
config.block0 = ((config.block0 & ~(0x1c0000)) | (i << 18));
|
||||
break;
|
||||
}
|
||||
}
|
||||
if (i == 9) errors = true;
|
||||
}
|
||||
cmdp += 2;
|
||||
break;
|
||||
case 'c':
|
||||
block0 = param_get32ex(Cmd, cmdp + 1, 0, 16);
|
||||
gotconf = true;
|
||||
cmdp += 2;
|
||||
break;
|
||||
case 'd':
|
||||
param_getstr(Cmd, cmdp + 1, modulation, sizeof(modulation));
|
||||
cmdp += 2;
|
||||
int offset = arg_get_int_def(ctx, idx++, -1);
|
||||
|
||||
if (strcmp(modulation, "FSK") == 0) {
|
||||
config.modulation = DEMOD_FSK;
|
||||
} else if (strcmp(modulation, "FSK1") == 0) {
|
||||
config.modulation = DEMOD_FSK1;
|
||||
config.inverted = 1;
|
||||
} else if (strcmp(modulation, "FSK1a") == 0) {
|
||||
config.modulation = DEMOD_FSK1a;
|
||||
config.inverted = 0;
|
||||
} else if (strcmp(modulation, "FSK2") == 0) {
|
||||
config.modulation = DEMOD_FSK2;
|
||||
config.inverted = 0;
|
||||
} else if (strcmp(modulation, "FSK2a") == 0) {
|
||||
config.modulation = DEMOD_FSK2a;
|
||||
config.inverted = 1;
|
||||
} else if (strcmp(modulation, "ASK") == 0) {
|
||||
config.modulation = DEMOD_ASK;
|
||||
} else if (strcmp(modulation, "NRZ") == 0) {
|
||||
config.modulation = DEMOD_NRZ;
|
||||
} else if (strcmp(modulation, "PSK1") == 0) {
|
||||
config.modulation = DEMOD_PSK1;
|
||||
} else if (strcmp(modulation, "PSK2") == 0) {
|
||||
config.modulation = DEMOD_PSK2;
|
||||
} else if (strcmp(modulation, "PSK3") == 0) {
|
||||
config.modulation = DEMOD_PSK3;
|
||||
} else if (strcmp(modulation, "BIa") == 0) {
|
||||
config.modulation = DEMOD_BIa;
|
||||
config.inverted = 1;
|
||||
} else if (strcmp(modulation, "BI") == 0) {
|
||||
config.modulation = DEMOD_BI;
|
||||
config.inverted = 0;
|
||||
} else {
|
||||
PrintAndLogEx(WARNING, "Unknown modulation '%s'", modulation);
|
||||
errors = true;
|
||||
}
|
||||
config.block0 = ((config.block0 & ~(0x1f000)) | (config.modulation << 12));
|
||||
break;
|
||||
case 'i':
|
||||
if ((param_getchar(Cmd, cmdp + 1) == '0') || (param_getchar(Cmd, cmdp + 1) == '1')) {
|
||||
config.inverted = param_getchar(Cmd, cmdp + 1) == '1';
|
||||
cmdp += 2;
|
||||
} else {
|
||||
config.inverted = true;
|
||||
cmdp += 1;
|
||||
}
|
||||
break;
|
||||
case 'o':
|
||||
errors |= param_getdec(Cmd, cmdp + 1, &offset);
|
||||
if (!errors)
|
||||
config.offset = offset;
|
||||
cmdp += 2;
|
||||
break;
|
||||
case 'q':
|
||||
if ((param_getchar(Cmd, cmdp + 1) == '0') || (param_getchar(Cmd, cmdp + 1) == '1')) {
|
||||
config.Q5 = param_getchar(Cmd, cmdp + 1) == '1';
|
||||
cmdp += 2;
|
||||
} else {
|
||||
config.Q5 = true;
|
||||
cmdp += 1;
|
||||
}
|
||||
break;
|
||||
case 's':
|
||||
if ((param_getchar(Cmd, cmdp + 1) == '0') || (param_getchar(Cmd, cmdp + 1) == '1')) {
|
||||
config.ST = param_getchar(Cmd, cmdp + 1) == '1';
|
||||
cmdp += 2;
|
||||
} else {
|
||||
config.ST = true;
|
||||
cmdp += 1;
|
||||
}
|
||||
config.block0 = ((config.block0 & ~(0x8)) | (config.ST << 3));
|
||||
break;
|
||||
case 'r':
|
||||
errors = param_getdec(Cmd, cmdp + 1, &downlink_mode);
|
||||
if (downlink_mode > 3)
|
||||
downlink_mode = 0;
|
||||
if (!errors)
|
||||
config.downlink_mode = downlink_mode;
|
||||
cmdp += 2;
|
||||
break;
|
||||
default:
|
||||
PrintAndLogEx(WARNING, "Unknown parameter '%c'", param_getchar(Cmd, cmdp));
|
||||
errors = true;
|
||||
bool r0 = arg_get_lit(ctx, idx++);
|
||||
bool r1 = arg_get_lit(ctx, idx++);
|
||||
bool r2 = arg_get_lit(ctx, idx++);
|
||||
bool r3 = arg_get_lit(ctx, idx++);
|
||||
CLIParserFree(ctx);
|
||||
|
||||
// validate user specified downlink mode
|
||||
if ((r0 + r1 + r2 + r3) > 1) {
|
||||
PrintAndLogEx(FAILED, "Error multiple downlink encoding");
|
||||
return PM3_EINVARG;
|
||||
}
|
||||
|
||||
// validate user specified modulation FSK,FSK1,...BIA
|
||||
if (verify_mods > 1) {
|
||||
PrintAndLogEx(FAILED, "Error multiple demodulations, select one");
|
||||
return PM3_EINVARG;
|
||||
}
|
||||
|
||||
// validate user specified bitrate
|
||||
uint8_t rates[9] = {8, 16, 32, 40, 50, 64, 100, 128, 0};
|
||||
if (bitrate != -1) {
|
||||
uint8_t i = 0;
|
||||
for (; i < ARRAYLEN(rates); i++) {
|
||||
if (rates[i] == bitrate) {
|
||||
config.bitrate = i;
|
||||
config.block0 = ((config.block0 & ~(0x1c0000)) | (i << 18));
|
||||
break;
|
||||
}
|
||||
}
|
||||
if (i == 9){
|
||||
PrintAndLogEx(FAILED, "Error select a valid bitrate");
|
||||
return PM3_EINVARG;
|
||||
}
|
||||
}
|
||||
|
||||
//Validations
|
||||
if (errors) return usage_t55xx_config();
|
||||
// validate user specified offset
|
||||
if (offset > -1) {
|
||||
config.offset = offset;
|
||||
}
|
||||
|
||||
config.block0Status = userSet;
|
||||
// validate user specific T5555 / Q5
|
||||
config.Q5 = use_q5;
|
||||
|
||||
// validate user specific sequence terminator
|
||||
config.ST = use_st;
|
||||
if (use_st) {
|
||||
config.block0 = ((config.block0 & ~(0x8)) | (config.ST << 3));
|
||||
}
|
||||
|
||||
// validate user specific invert
|
||||
config.inverted = invert;
|
||||
|
||||
// validate user specific downlink mode
|
||||
uint8_t downlink_mode = config.downlink_mode;
|
||||
if (r0)
|
||||
downlink_mode = refFixedBit;
|
||||
else if (r1)
|
||||
downlink_mode = refLongLeading;
|
||||
else if (r2)
|
||||
downlink_mode = refLeading0;
|
||||
else if (r3)
|
||||
downlink_mode = ref1of4;
|
||||
|
||||
config.downlink_mode = downlink_mode;
|
||||
|
||||
// validate user specific modulation
|
||||
if (mods[0]){
|
||||
config.modulation = DEMOD_FSK;
|
||||
} else if (mods[1]) {
|
||||
config.modulation = DEMOD_FSK1;
|
||||
config.inverted = 0;
|
||||
} else if (mods[2]) {
|
||||
config.modulation = DEMOD_FSK1a;
|
||||
config.inverted = 1;
|
||||
} else if (mods[3]) {
|
||||
config.modulation = DEMOD_FSK2;
|
||||
config.inverted = 0;
|
||||
} else if (mods[4]) {
|
||||
config.modulation = DEMOD_FSK2a;
|
||||
config.inverted = 1;
|
||||
} else if (mods[5]) {
|
||||
config.modulation = DEMOD_ASK;
|
||||
} else if (mods[6]) {
|
||||
config.modulation = DEMOD_PSK1;
|
||||
} else if (mods[7]) {
|
||||
config.modulation = DEMOD_PSK2;
|
||||
} else if (mods[8]) {
|
||||
config.modulation = DEMOD_PSK3;
|
||||
} else if (mods[9]) {
|
||||
config.modulation = DEMOD_NRZ;
|
||||
} else if (mods[10]) {
|
||||
config.modulation = DEMOD_BI;
|
||||
config.inverted = 0;
|
||||
} else if (mods[11]) {
|
||||
config.modulation = DEMOD_BIa;
|
||||
config.inverted = 1;
|
||||
}
|
||||
|
||||
config.block0 = ((config.block0 & ~(0x1f000)) | (config.modulation << 12));
|
||||
|
||||
config.block0Status = USERSET;
|
||||
if (gotconf) {
|
||||
SetConfigWithBlock0Ex(block0, config.offset, config.Q5);
|
||||
}
|
||||
|
||||
PrintAndLogEx(INFO, "--- " _CYAN_("current t55xx config") " --------------------------");
|
||||
return printConfiguration(config);
|
||||
}
|
||||
int T55xxReadBlock(uint8_t block, bool page1, bool usepwd, uint8_t override, uint32_t password, uint8_t downlink_mode) {
|
||||
|
|
@ -1201,7 +1223,7 @@ bool t55xxTryDetectModulationEx(uint8_t downlink_mode, bool print_config, uint32
|
|||
config.pwd = pwd & 0xffffffff;
|
||||
}
|
||||
|
||||
config.block0Status = autoDetect;
|
||||
config.block0Status = AUTODETECT;
|
||||
if (print_config)
|
||||
printConfiguration(config);
|
||||
|
||||
|
|
@ -1237,7 +1259,7 @@ bool t55xxTryDetectModulationEx(uint8_t downlink_mode, bool print_config, uint32
|
|||
PrintAndLogEx(NORMAL, "--[%d]---------------", i + 1);
|
||||
}
|
||||
|
||||
config.block0Status = autoDetect;
|
||||
config.block0Status = AUTODETECT;
|
||||
if (print_config)
|
||||
printConfiguration(tests[i]);
|
||||
}
|
||||
|
|
@ -1514,17 +1536,17 @@ int CmdT55xxSpecial(const char *Cmd) {
|
|||
}
|
||||
|
||||
int printConfiguration(t55xx_conf_block_t b) {
|
||||
PrintAndLogEx(INFO, " Chip Type : " _GREEN_("%s"), (b.Q5) ? "Q5/T5555" : "T55x7");
|
||||
PrintAndLogEx(INFO, " Modulation : " _GREEN_("%s"), GetSelectedModulationStr(b.modulation));
|
||||
PrintAndLogEx(INFO, " Bit Rate : %s", GetBitRateStr(b.bitrate, (b.block0 & T55x7_X_MODE && (b.block0 >> 28 == 6 || b.block0 >> 28 == 9))));
|
||||
PrintAndLogEx(INFO, " Inverted : %s", (b.inverted) ? _GREEN_("Yes") : "No");
|
||||
PrintAndLogEx(INFO, " Offset : %d", b.offset);
|
||||
PrintAndLogEx(INFO, " Seq. Term. : %s", (b.ST) ? _GREEN_("Yes") : "No");
|
||||
PrintAndLogEx(INFO, " Block0 : 0x%08X %s", b.block0, GetConfigBlock0Source(b.block0Status));
|
||||
PrintAndLogEx(INFO, " Downlink Mode : %s", GetDownlinkModeStr(b.downlink_mode));
|
||||
PrintAndLogEx(INFO, " Password Set : %s", (b.usepwd) ? _RED_("Yes") : _GREEN_("No"));
|
||||
PrintAndLogEx(INFO, " Chip type......... " _GREEN_("%s"), (b.Q5) ? "Q5/T5555" : "T55x7");
|
||||
PrintAndLogEx(INFO, " Modulation........ " _GREEN_("%s"), GetSelectedModulationStr(b.modulation));
|
||||
PrintAndLogEx(INFO, " Bit rate.......... %s", GetBitRateStr(b.bitrate, (b.block0 & T55x7_X_MODE && (b.block0 >> 28 == 6 || b.block0 >> 28 == 9))));
|
||||
PrintAndLogEx(INFO, " Inverted.......... %s", (b.inverted) ? _GREEN_("Yes") : "No");
|
||||
PrintAndLogEx(INFO, " Offset............ %d", b.offset);
|
||||
PrintAndLogEx(INFO, " Seq. terminator... %s", (b.ST) ? _GREEN_("Yes") : "No");
|
||||
PrintAndLogEx(INFO, " Block0............ %08X %s", b.block0, GetConfigBlock0Source(b.block0Status));
|
||||
PrintAndLogEx(INFO, " Downlink mode..... %s", GetDownlinkModeStr(b.downlink_mode));
|
||||
PrintAndLogEx(INFO, " Password set...... %s", (b.usepwd) ? _RED_("Yes") : _GREEN_("No"));
|
||||
if (b.usepwd) {
|
||||
PrintAndLogEx(INFO, " Password : %08X", b.pwd);
|
||||
PrintAndLogEx(INFO, " Password.......... %08X", b.pwd);
|
||||
}
|
||||
PrintAndLogEx(NORMAL, "");
|
||||
return PM3_SUCCESS;
|
||||
|
|
@ -2714,17 +2736,17 @@ char *GetConfigBlock0Source(uint8_t id) {
|
|||
char *retStr = buf;
|
||||
|
||||
switch (id) {
|
||||
case autoDetect:
|
||||
snprintf(retStr, sizeof(buf), _YELLOW_("(Auto detect)"));
|
||||
case AUTODETECT:
|
||||
snprintf(retStr, sizeof(buf), _YELLOW_("(auto detect)"));
|
||||
break;
|
||||
case userSet:
|
||||
snprintf(retStr, sizeof(buf), _YELLOW_("(User set)"));
|
||||
case USERSET:
|
||||
snprintf(retStr, sizeof(buf), _YELLOW_("(user set)"));
|
||||
break;
|
||||
case tagRead:
|
||||
snprintf(retStr, sizeof(buf), _GREEN_("(Tag read)"));
|
||||
case TAGREAD:
|
||||
snprintf(retStr, sizeof(buf), _GREEN_("(tag read)"));
|
||||
break;
|
||||
default:
|
||||
snprintf(retStr, sizeof(buf), _RED_("(Unknown)"));
|
||||
snprintf(retStr, sizeof(buf), _RED_("(n/a)"));
|
||||
break;
|
||||
}
|
||||
return buf;
|
||||
|
|
@ -4249,7 +4271,7 @@ static command_t CommandTable[] = {
|
|||
{"info", CmdT55xxInfo, AlwaysAvailable, "Show T55x7 configuration data (page 0/ blk 0)"},
|
||||
{"p1detect", CmdT55xxDetectPage1, IfPm3Lf, "Try detecting if this is a t55xx tag by reading page 1"},
|
||||
{"read", CmdT55xxReadBlock, IfPm3Lf, "Read T55xx block data"},
|
||||
{"resetread", CmdResetRead, IfPm3Lf, "Send Reset Cmd then lf read the stream to attempt to identify the start of it (needs a demod and/or plot after)"},
|
||||
{"resetread", CmdResetRead, IfPm3Lf, "Send Reset Cmd then lf read the stream to attempt to identify the start of it"},
|
||||
{"restore", CmdT55xxRestore, IfPm3Lf, "Restore T55xx card Page 0 / Page 1 blocks"},
|
||||
{"trace", CmdT55xxReadTrace, AlwaysAvailable, "Show T55x7 traceability data (page 1/ blk 0-1)"},
|
||||
{"wakeup", CmdT55xxWakeUp, IfPm3Lf, "Send AOR wakeup command"},
|
||||
|
|
|
|||
|
|
@ -127,10 +127,10 @@ typedef struct {
|
|||
uint8_t offset;
|
||||
uint32_t block0;
|
||||
enum {
|
||||
notSet = 0x00,
|
||||
autoDetect = 0x01,
|
||||
userSet = 0x02,
|
||||
tagRead = 0x03,
|
||||
NOTSET = 0x00,
|
||||
AUTODETECT = 0x01,
|
||||
USERSET = 0x02,
|
||||
TAGREAD = 0x03,
|
||||
} block0Status;
|
||||
enum {
|
||||
RF_8 = 0x00,
|
||||
|
|
|
|||
Loading…
Reference in a new issue