RfidResearchGroup/proxmark3
1
1
Fork 0
mirror of https://github.com/RfidResearchGroup/proxmark3.git synced 2025-01-03 22:53:58 +08:00
Code Issues Projects Releases Packages Wiki Activity

Updated linux instructions

Browse source
This commit is contained in:
gator96100 2020-12-29 18:08:35 +01:00
parent 800e68d993
commit d1a6164a10
1 changed files with 26 additions and 1 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

27
doc/md/Installation_Instructions/Linux-Installation-Instructions.md
View file

@ -25,13 +25,16 @@ Install the requirements
```sh
sudo apt-get install --no-install-recommends git ca-certificates build-essential pkg-config \
libreadline-dev gcc-arm-none-eabi libnewlib-dev qtbase5-dev libbz2-dev libbluetooth-dev
libreadline-dev gcc-arm-none-eabi libnewlib-dev qtbase5-dev libbz2-dev libbluetooth-dev \
binutils-arm-none-eabi gdb openocd gdb-multiarch
```
If you don't need the native Bluetooth support in the client, you can skip the installation of `libbluetooth-dev`.
If you don't need the graphical components of the Proxmark3 client (such as in `hw tune`), you can skip the installation of `qtbase5-dev`.
If you don't need the debugging packages, you can skip the installation of `binutils-arm-none-eabi`,`gdb`,`openocd` and `gdb-multiarch`.
If you get some (non blocking) error at runtime such as _Gtk-Message: Failed to load module "canberra-gtk-module"_ you may have to install `libcanberra-gtk-module`.
## On ArchLinux
@ -112,3 +115,25 @@ It must return `ok`. Otherwise this means you've got a permission problem to fix
# Compile and use the project
Now you're ready to follow the [compilation instructions](/doc/md/Use_of_Proxmark/0_Compilation-Instructions.md).
## (Optional) Visual Studio Code debugging
Download and install [Visual Studio Code](https://code.visualstudio.com/)
Download and install [J-Link Software and Documentation pack](https://www.segger.com/downloads/jlink)
On some systems `arm-none-eabi-gdb` was replaced with `gdb-multiarch`. In order to use the J-Link debugger you need to link `arm-none-eabi-gdb` to `gdb-multiarch`:
```sh
ln -s /usr/bin/gdb-multiarch /usr/bin/arm-none-eabi-gdb
```
Setup the Visual Studio Code configuration, by going into your project folder and run:
```sh
./.vscode/setup.sh
```
now launch Visual Studio Code and open your project folder
_note_
Please install the recommended Visual Studio Code extensions in order for debugging to work.