RfidResearchGroup/proxmark3
1
1
Fork 0
mirror of https://github.com/RfidResearchGroup/proxmark3.git synced 2025-02-13 02:34:48 +08:00
Code Issues Projects Releases Packages Wiki Activity

doc

Browse source
This commit is contained in:
Philippe Teuwen 2019-05-31 21:37:11 +02:00
parent ecc62add26
commit ebf714fc64
1 changed files with 6 additions and 2 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

8
doc/bt_manual_v10.md
View file

@ -33,7 +33,7 @@ Built-in battery can support standalone mode, off-line sniffing, off-line readin
* Unplug your Proxmark3 RDV4.0 device from any usb cable. * Unplug your Proxmark3 RDV4.0 device from any usb cable.
* Remove the plastic upper case of Proxmark3 RDV4.0 with opener. * Remove the plastic upper case of Proxmark3 RDV4.0 with opener.
* The antenna is temporarily removed with a screwdriver to expose the FPC interface. * Remove temporarily the antenna with a screwdriver to expose the FPC interface.
* Turn off all power switches, insert the FPC wire into the FPC connector, and lock the FPC connector. * Turn off all power switches, insert the FPC wire into the FPC connector, and lock the FPC connector.
* Tear off the blue film of heat conductive double-sided tape. Align the add-on to the hole positions and gently insert it into the case. * Tear off the blue film of heat conductive double-sided tape. Align the add-on to the hole positions and gently insert it into the case.
* Assembly finished! * Assembly finished!
@ -70,12 +70,16 @@ sudo hcitool scan
Scanning ... Scanning ...
aa:bb:cc:dd:ee:ff PM3_RDV4.0 aa:bb:cc:dd:ee:ff PM3_RDV4.0
``` ```
Instead of aa:bb:cc:dd:ee:ff, you'll see your MAC address.
Instead of aa:bb:cc:dd:ee:ff, you'll see your MAC address.
2. Bind your BT add-on MAC address to a serial port 2. Bind your BT add-on MAC address to a serial port
```sh ```sh
sudo rfcomm bind rfcomm0 aa:bb:cc:dd:ee:ff sudo rfcomm bind rfcomm0 aa:bb:cc:dd:ee:ff
``` ```
Replace `aa:bb:cc:dd:ee:ff` by yourMAC address.
3. The blue state LED on the add-on will keep blinking after the 3. The blue state LED on the add-on will keep blinking after the
connection is established. Only when the Proxmark3 client opens the connection is established. Only when the Proxmark3 client opens the
/dev/rfcomm0 port, the blue LED turns on solid, indicating that the /dev/rfcomm0 port, the blue LED turns on solid, indicating that the