RfidResearchGroup/proxmark3
1
1
Fork 0
mirror of https://github.com/RfidResearchGroup/proxmark3.git synced 2025-02-21 22:54:40 +08:00
Code Issues Projects Releases Packages Wiki Activity

Update bt_manual_v10.md

Browse source
This commit is contained in:
Iceman 2020-05-19 10:13:19 +02:00 committed by GitHub
parent e73aab8ed3
commit ecd709494a
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
1 changed files with 4 additions and 4 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

8
doc/bt_manual_v10.md
View file

@ -310,7 +310,7 @@ Settings of the Blue Shark add-on and of the white dongle:
If you bought your Bluetooth adapter dongle somewhere else, make sure to set the baud rate to 115200 `AT+BAUD8`, the name `AT+NAMEPM3_RDV4.0` and PIN `AT+PIN1234` correctly.
### 6.1 UART and LED behavior
### 6.2 UART and LED behavior
^[Top](#top)
Bluetooth is connected to Proxmark3 RDV4.0 via UART. The USB and UART interfaces of RDV4.0 can coexist without conflict, and no special switching is required.
@ -318,18 +318,18 @@ Bluetooth is connected to Proxmark3 RDV4.0 via UART. The USB and UART interfaces
The following link has helpful notes on UART usage and baud rates:
https://github.com/RfidResearchGroup/proxmark3/blob/master/doc/uart_notes.md
### 6.2 Disassembly
### 6.3 Disassembly
^[Top](#top)
There is a heat conductive double-sided tape inside the add-on, which has strong adhesive force. Therefore, if add-on needs to be removed, it needs to be pulled out from the heat sink end with greater efforts. Each disassembly will reduce the viscidity of double-sided tape. When double-sided tape is well protected, it will not affect the second use. Thermal conductivity will be slightly worse and will therefore have a direct impact on the thermal performance of the heat sink.
### 6.3 Battery charging
### 6.4 Battery charging
^[Top](#top)
The battery charging circuit is turned on by default. Any time a USB cable is inserted, the battery will be automatically charged. The red LED will remain bright when charging.
The red LED will be extinguished when charging is completed.
### 6.4 Get better signals
### 6.5 Get better signals
^[Top](#top)
For the better heat dissipation, we have used a cast metal enclosure for the add-on. As a result Bluetooth wireless signals are sacrificed. For example, if the back of add-on is facing the Bluetooth host, the signal is very bad and the distance will be reduced. The best signal strength can be obtained when the front glass faces the Bluetooth host.