Create Kali-Installation-Instructions.md

Created Kali page

Installation_Instructions/Kali-Installation-Instructions.md

@@ -0,0 +1,105 @@
+# Kali Installation
+Kali users usually must kill their modem manager in order for the proxmark3 to enumerate properly.
+''' sudo apt remove modemmanager '''
+
+# Video Installation guide
+[![Kali Installation tutorial](https://github.com/5w0rdfish/Proxmark3-RDV4-ParrotOS/blob/master/screenshot-www.youtube.com-2019.03.17-20-44-33.png)](https://youtu.be/Wl9AsrU4igo "ParrotOS Installation Tutorial")
+
+
+---
+## Manual Install
+First what we want to do is get an update for the system. If you need to upgrade do this **before** the install
+An upgrade was carried out prior to following these instructions. 
+
+### Update
+```sh
+sudo apt-get update
+``` 
+### Requirements.
+
+```sh
+sudo apt-get install p7zip git build-essential libreadline5 libreadline-dev \
+libusb-0.1-4 libusb-dev libqt4-dev perl pkg-config wget libncurses5-dev gcc-arm-none-eabi
+```
+If you do get any issues during the requirements installation, I have found it to help using the synaptic package manager. 
+
+### Clone Fork 
+```sh
+git clone https://github.com/RfidResearchGroup/proxmark3.git
+```
+
+### Change directory into the directory created
+```sh
+cd proxmark3
+```
+
+### Get the latest commits
+```sh
+git pull
+```
+
+### Make Udev
+Iceman has made the udev script which takes care of the blacklist rules. This should take care of the remove modem manager.
+The make udev command also create's an alias for the pm3 under /dev which you will use to connect to the proxmark. 
+
+```sh
+sudo make udev
+```
+if you have any issues:
+```sh
+sudo apt remove modemmanager
+```
+
+> **Note**  If you have any issues connecting or during the flash, follow the steps listed [here](https://github.com/RfidResearchGroup/proxmark3/issues/35) and use the command sudo apt remove modemmanager 
+
+Log out and log back in again. And now we are all set to take the next step. 
+
+Enter the proxmark3 folder
+```sh
+cd proxmark3
+```
+
+### Clean and Compile
+Clean and complete compilation 
+
+```sh
+ make clean && make all
+```
+### Check Connection
+Once this is complete run the following comands to make sure the proxmark is being picked up by your computer. 
+
+```sh
+sudo dmesg | grep -i usb
+```
+It should show up as a CDC device:
+```sh
+[10416.555108] usb 2-1.2: Product: PM3
+[10416.555111] usb 2-1.2: Manufacturer: proxmark.org
+[10416.555871] cdc_acm 2-1.2:1.0: ttyACM0: USB ACM device
+```
+
+### Flash the BOOTROM & FULLIMAGE
+ ```sh
+ client/flasher /dev/ttyACM0 -b bootrom/obj/bootrom.elf armsrc/obj/fullimage.elf
+```
+### Change into the client folder
+
+```sh
+cd client
+```
+### Run the client
+ ``` sh 
+./proxmark3 /dev/pm #press tab on the keyboard for it to detect the proxmark
+```
+or  
+
+### Run the client 
+ ```sh
+./proxmark3 /dev/ttyACM0
+```
+ 
+### Run a test command
+ ```sh
+hw tune
+```
+