iceman1001
374571046d
remove debug..
2018-02-07 20:12:16 +01:00
iceman1001
aee5fcb24a
debugs
2018-02-07 17:22:23 +01:00
iceman1001
094b5db9c5
fix: configure mux at startup
2018-02-07 17:21:51 +01:00
iceman1001
a2ac368fdb
fix.. wrong switch
2018-02-07 13:14:04 +01:00
iceman1001
75d04307a1
chg: adapting some HF voltage readings.
2018-02-07 13:11:10 +01:00
iceman1001
3d2fd2e3a1
FIX: start up,MUXSEL_HIPKD(PA19),MUXSEL_LOPKD(PA20) are floating state. Should adapt FPGA image aswell.
2018-02-07 12:08:50 +01:00
iceman1001
13bb29a386
fix: 'hf mf fchk' - releasing memory when finished is a good thing
2018-02-05 22:59:49 +01:00
iceman1001
3464fbe1df
fix 'hf mf darkside' - adapted solution from @pwpivi
2018-02-05 20:46:14 +01:00
iceman1001
fca1c9b7cf
chg: 'hf mf mifare' - (deviceside) reset cycles when negative or too large
2018-02-05 16:47:10 +01:00
Jean-Pierre Clair
847656c613
spelling error authetication instead of authentication
2018-02-05 14:09:38 +01:00
iceman1001
6605d92fbb
chg: tried making the reselect more stable.
...
chg: 'hf iclass readblk'
chg: 'hf iclass writeblk'
chg: 'hf iclass dump'
chg: 'hf iclass clone'
all commands now has 'v' verbose parameter for more detailed output.
2018-02-04 12:25:55 +01:00
iceman1001
6a9ddf6e69
chg 'hf iclass chk' - increased timeout, switch off antenna before each run in order to reset card, three retires. all this make it more stable.
2018-02-04 10:20:38 +01:00
iceman1001
dc25f9212f
FIX: 'hf iclass sim 2'
...
FIX: 'hf iclass sim 4'
FIX: 'hf iclass loclass' - this fixes the bug where loclass assumes the epurse value is all zeros, while it now should save the epurse value during the simulation if it is updated/read.
I assume a empty valid epurse, while an all zero epurse is too much easy to detect as a anomaly.
2018-02-04 00:52:29 +01:00
iceman1001
856e2770a6
chg: 'hf iclass sim' different output
2018-02-01 17:44:27 +01:00
iceman1001
e0373212a3
chg: 'hf iclass sim' - sim2, 4 get less default output, set DBG 4 for verbose
2018-02-01 16:10:24 +01:00
iceman1001
fa5b550fa8
chg: should be a define.
2018-02-01 15:35:00 +01:00
iceman1001
145bccdea8
chg: wrong type
2018-02-01 15:33:10 +01:00
iceman1001
519cc72966
chg: crc change
2018-02-01 15:22:01 +01:00
iceman1001
52d69ed4ee
CHG: refactor CRC16 algos. This is a big change, most likely some parts broke, hard to test it all.
2018-02-01 15:19:47 +01:00
iceman1001
721ba5d287
fix: 'hf iclass sim' - too small buffers caused sim to fail
2018-02-01 09:31:30 +01:00
iceman1001
c6207d09e1
chg: 'hf felica reader' is better, almost working good
2018-01-30 03:29:37 +01:00
iceman1001
50743b7e88
rem: 'hf iclass' blocknum LUT is gone. Removed also functionality for it.
2018-01-29 16:44:49 +01:00
iceman1001
5c380767e8
chg: 'hf iclass' removed a blocknum LUT implementation. My guess is the new crc16_iclass will do fine.
2018-01-29 16:38:03 +01:00
iceman1001
b39332e938
REM: 'hf 15 debug' removed command, unified with mf_debuglevel instead. The idea is to have ONE debug flag on deviceside.
2018-01-29 15:58:00 +01:00
iceman1001
787d87e0e6
testing to make dma buffer larger.
2018-01-29 13:42:42 +01:00
iceman1001
c04ac4f9ac
ADD: 'hf felica reader' - added pm3 as FeliCa reader
...
ADD: raw commands - added the basis for sending RAW commands to FeliCa.
CHG: CRC16 rework, uses table based implementation. This will change more functions as I go on.
2018-01-29 13:42:02 +01:00
iceman1001
fd854a9308
chg: added Abrasive's uart implementation, its simpler to understand but the downside it doesn't do both speeds. (1/4 , 1/2556).
...
ref 2b8bff7dae
2018-01-28 12:36:41 +01:00
iceman1001
57df6a1a7e
revert: add reflect function since its used in crc.c
2018-01-28 10:49:57 +01:00
iceman1001
cf44d04be1
add: reflect16
...
rem: swapbits, reflect
2018-01-28 10:46:46 +01:00
iceman1001
e76b4f93b8
notes
2018-01-27 23:15:08 +01:00
iceman1001
ede55a1498
add: fast 8bit reversal.
2018-01-27 22:20:56 +01:00
iceman1001
60afef3938
FIX: 'hf snoop' - forcing function to clean up AT91C_BASE_SSC->SSC_RFMR into default setup values.
...
FIX: 'lf ti' - forcing to cleaning up of SSC when finished.
2018-01-27 20:30:50 +01:00
iceman1001
a6c50d7de2
chg: 'hf 14b' removed a delay loop when transmit as reader
2018-01-25 18:44:25 +01:00
iceman1001
5939164635
FIX: 'hf 15' timouts bugs when wait is set == 0...
...
thanks @lnv42 for fix 84cb4f6bbf
2018-01-21 18:34:29 +01:00
iceman1001
be82f9f018
DEL: 'hf mf sniff' - since it is very similar to 'hf 14a sniff' , I removed this command. The desired functionality will become a new 'hf list mf' option in the future.
2018-01-18 14:11:22 +01:00
iceman1001
b4afc8cdc4
fix: 'hf mf sniff' - @merlokk 's adjustments
2018-01-17 00:28:40 +01:00
iceman1001
de983252eb
chg: dma macros instead
2018-01-17 00:27:13 +01:00
iceman1001
93ecfddb88
CHG: iso15 from b8f35947f2 @lnv42
2018-01-16 21:07:58 +01:00
iceman1001
466bbe1733
fix: 'hf mf hardnested' - too fast timeouts. https://github.com/Proxmark/proxmark3/issues/518
2018-01-15 14:22:46 +01:00
iceman1001
5ee4eeb84b
chg: 'hf mf sim' wrong debuglevel for message
2018-01-11 22:08:02 +01:00
iceman1001
5ea8f73547
FIX: cmd_send has wrong varible definitions, leading to loss of values.
2018-01-11 21:47:27 +01:00
iceman1001
eed271af5c
CHG: 'hw tune' tuning antenna now can handle bigger antennas than 65v, with shifting 9, it can measure up to 130v.
...
CHG: 'hw tune' - command output and layout changes. I think this is easier to read.
2018-01-09 14:53:17 +01:00
iceman1001
b578e55d17
chg: 'hf 14b snoop' renamed 'hf 14b sniff'...
...
In order to use one command for SNIFFING.. All snoop names will be renamed.
2018-01-06 21:12:28 +01:00
iceman1001
647d275d18
chg: 'hf felica litedump' - now turns off device when aborted via keyboard, or buttonpress
2018-01-05 17:57:50 +01:00
iceman1001
05b62d0b3d
syntax sugar
2018-01-05 17:40:07 +01:00
iceman1001
82dbfba827
chg: 'hf felica litedump' - more stable impl. Will not break when run twice in a row. Still device can be in a loop if 100sec timeout occures. :(
2018-01-05 17:39:04 +01:00
iceman1001
6e93ed80a3
chg: 'hf iclass sniff' - still problems with the dmabuffer
2018-01-02 19:10:55 +01:00
iceman1001
fe9416db23
chg: 'hf iclass' - work in progress. running default_iclass_keys.dic against reader (pm3 as simulation)
2018-01-02 11:17:31 +01:00
iceman1001
036d050384
chg: syntax sugar
2018-01-02 11:15:23 +01:00
iceman1001
186de6e1ae
chg: adapting to new paths
2017-12-24 10:30:29 +01:00
