ook @marshmellows changes and remade them a bit. TagTypeUL_t behaves like a flag-enum.
"HF MFU DUMP" now autodetects tagtype, and the deviceside should report back proper length.
NEW: HF MFU SETUID - set UID to a magic UL / UL-C tag. *not implemented*
CHG: minor alignment for "Hf list" output.
CHG: removed unneeded function parameters to the ultralight commands
CHG: the const MAX_MIFARE_FRAME_SIZE is changed to MAX_FRAME_SIZE in the ultralight commands since the UL-Ev1 can have bigger frames than 18bytes.
CHG: adding DES support for the Ultralight-c read commands on deviceside.
- provided a BigBuf_malloc() function to dynamically allocate parts of BigBuf
e.g. for DMA-Buffers, Frame-Buffers, Emulator-Memory
- the whole rest of BigBuf is now available for traces (instead of a small fixed amount)
- send actual traceLen together with trace data
- changed client side to cope with varying traceLen
- changed small buffers to automatic variables instead of parts of BigBuf
ADD: added a manufacturer list in "hf 14a reader", only viable when UID is double or triple size. Thanks to Asper for the list.
ADD: detect chinese magic backdoor commands in "hf 14a reader"
CHG: minor code clean up.
CHG: USB_CMD_DATA_SIZE is now used as maxsize for transfer of data between client and pm3device
CHG: suggested a fix for the underscore problem in ioclass\fileutils.c
ADD: tnp3xx support
ADD: nxp tag idents.
ADD: identifiction of chinese backdoor commands to hf 14a reader.
- buffers were too small to handle 256 byte frames
- parity bits were only handled for up to 32 byte frames
- trace format was inefficient
- removed parity calculation from decoders in iclass.c (parity not used on air anyway)
- hf mf rdsc (fix): didn't account for 16 block sectors, allowed max sector 63 instead of 39
- hf mf ecfill (add): added (optional) card size parameter and support for non 1K cards
- hf mf dump (add): added (optional) card size parameter and support for non 1K cards
- hf mf dump (fix): Access Condition 011 not handled correctly (tried to access with key A)
- hf mf restore (add): added (optional) card size parameter and support for non 1K cards
- hf mf nested (fix): didn't account for 16 block sectors, allowed max sector 63 instead of 39
- hf mf nested (fix): always dumped 16 keys to dumpkeys.bin instead of correct number
- hf mf chk (fix): always dumped 16 keys to dumpkeys.bin instead of correct number
- hf mf eget (fix): displayed three instead of one block
- hf mf eload (add): load 4K .eml files (but accepts 1K .eml files for backwards compatibility)
- hf mf esave (add): always save the whole emulator memory (4K) instead of 1K only
- hf mf ecfill (add): added (optional) card size parameter and support for non 1K cards
- enhanced tracing: hf 14a list now shows meaningful timing information. With new option f it also shows the frame delay times (fdt)
- small fix for hf 14b list - it used to run into the trace trailer
- hf 14a sim now obeys iso14443 timing (fdt of 1172 or 1234 resp.)
Note: you need to flash FPGA as well.
More details in http://www.proxmark.org/forum/viewtopic.php?pid=9721#p9721
- PM: used GetCountMifare in MifareNested() for improved timing accuracy and to deliver better quality nonces
- PM: MifareNested now delivers exactly two different nonces to avoid time consuming multiple lfsr_recovery32() on client side
- Client: replaced quicksort by bucketsort in crapto1.c which is faster
- Client: use multithreading (two parallel calls to lfsr_recovery32())
- Client: fixed a small bug in mfnested() (always showed trgkey=0)
- Client: introduced a mutex for PrintAndLog() to avoid interlaced printing
Minor rework of hf mf chk:
- Avoid time consuming off/on cycles. Send a "halt" instead.
2. added abilities to: clear, get, set, load from card, load from nested card emulator dump
3. tried to fix proxmark promt have seen everywhere (not so good)
4. reorganized arm code
