Chris
5f77121694
initial commit to be in sync the-soon-defunct repo pm3rdv40.
2018-08-12 21:54:31 +02:00
Chris
bacf8aff0f
add: FPC connector skeleton usart. Not working but if will be a starting point for those who might want to help out with it.
2018-07-30 09:54:44 +02:00
iceman1001
4d8488e14b
CHG: https://github.com/Proxmark/proxmark3/pull/631 from offical repo. (piwi)
...
CHG: textual adjustments
2018-07-28 14:25:12 +02:00
Chris
79158c7360
chg; preparing for more cmds.
2018-07-06 00:24:04 +02:00
Chris
36d774506c
chg: 'sm raw' - implemented 'r' don't read reply
2018-07-05 21:10:21 +02:00
Chris
fca841122f
chg: 'sc reader' - hooked up atr.
2018-07-05 16:32:10 +02:00
Chris
ee006c6a7b
add: sc upgrade - beta test
2018-07-05 14:38:31 +02:00
Chris
e7342e7402
chg: 'sc upgr' shouldnt print too much
2018-07-05 11:37:04 +02:00
Chris
f70b8be5de
add: 'sc' - smart card commad [rdv40]
...
chg: test to read out firmware
2018-07-05 10:48:24 +02:00
Chris
3ecff83de2
chg: clean up
2018-07-04 15:29:27 +02:00
Chris
9571cf1d13
chg: and wrap FPC code with defines..
2018-07-04 13:05:23 +02:00
Chris
e09f9cbb32
add: RDV40 smart card module comms ( Thanks to @Willok! ) bitbanging i2c with it
2018-07-04 12:19:04 +02:00
iceman1001
501c29f76d
add: support for reading flashmem
2018-05-22 12:09:17 +02:00
iceman1001
6b7819276d
add: 'mem info' - rudamentary support for new command.
2018-05-06 09:26:06 +02:00
iceman1001
4cd72b95c5
fix: coverty scan #277726 , unsigned value comparision always true.
2018-05-03 20:36:01 +02:00
iceman1001
989b80007c
chg: removed debugstatements
2018-05-03 16:20:46 +02:00
iceman1001
e50fef6607
fix: 'mem load' - wrong offset when uploading
2018-05-03 16:10:38 +02:00
iceman1001
021c0a1349
ADD: 'mem' commands. For RDV40 devices only.
...
If you don't have one, comment out inside client/Makefile this line
CFLAGS += -DWITH_FLASH
2018-05-03 12:15:03 +02:00
iceman1001
207fa2b574
add: potential fix for OSX uses, by @piwi
...
chg: adapting fix to support iceman forks extended commands.
2018-05-02 08:11:29 +02:00
iceman1001
98f0e9a284
fix: print.c on device doesn't have support for formatter %f
2018-04-27 12:16:35 +02:00
iceman1001
6ab1b285a0
chg.
2018-04-20 19:50:56 +02:00
iceman1001
f5718fb448
chg: wiping / reading / writing flashmem
2018-04-20 16:11:10 +02:00
iceman1001
a746699f5f
chg: reading / writing flashmem works better now.
2018-04-19 00:27:44 +02:00
iceman1001
42569a6f13
chg: adjusting for DEFINE usages.
2018-04-18 16:17:49 +02:00
iceman1001
0492df266c
chg: only print if compiled with smartcard flag
2018-04-18 12:41:03 +02:00
iceman1001
192aa9abd7
CHG: renamed iso7816 files
...
ADD: smartcard functionality (big thanks to Chris Nocker!)
2018-04-08 10:51:19 +02:00
iceman1001
3f5aab8f05
chg: preparing for iso7816 module statuses
2018-04-03 11:45:20 +02:00
iceman1001
3d956e686b
chg: flashmem adaptions
2018-03-31 10:35:40 +02:00
iceman1001
5690c0f5bc
chg: 'hw detectreader' - kind of useless previous change, measuring from two different readers, the max was 18.8v and 20.1v Not even close to 36v the standard ADC is configured
2018-03-15 10:48:57 +01:00
iceman1001
c3ba3f306f
chg: 'hw detectreader' - RDV40 adjustment
2018-03-15 09:25:22 +01:00
iceman1001
62814fd352
fix: 'hw detectreader' - adapted to PM3 RDV40 for HF measures.
2018-03-15 09:20:21 +01:00
iceman1001
7e0455aa0c
ADD: 'MattyRun' standalone - added the MattyRun standalone mode. *untested compilation*
2018-03-12 12:27:43 +01:00
iceman1001
802994d30a
add: 'hf 14 antifuzz' - the outline for the new functionality which fuzzes the anticollision phase ISO 14443a.
2018-02-28 13:21:47 +01:00
iceman1001
7b9ba2de8e
chg: standalone modes - adapted for HF_COLIN aswell, for easier compilation
2018-02-25 16:04:24 +01:00
iceman1001
35bdf6a58d
FIX: Accourding to errata, a SPI reset should be executed twice.
2018-02-17 17:35:54 +01:00
iceman1001
d0da96bf8a
remove warning "missleading-indentation"
...
flashmen spi 9bits?
2018-02-13 16:13:37 +01:00
iceman1001
1709c1ce1a
chg: flash_mem - hooked up client - device comms
2018-02-13 15:36:20 +01:00
iceman1001
85b2533435
chg: 'hw tune' device side should be unsigned and only 1024 (10b ADC)
2018-02-13 11:40:05 +01:00
iceman1001
5adb9af78f
chg: 'hw tune' - compensating the 3% error marginal.
2018-02-09 00:25:45 +01:00
iceman1001
094b5db9c5
fix: configure mux at startup
2018-02-07 17:21:51 +01:00
iceman1001
a2ac368fdb
fix.. wrong switch
2018-02-07 13:14:04 +01:00
iceman1001
75d04307a1
chg: adapting some HF voltage readings.
2018-02-07 13:11:10 +01:00
iceman1001
3d2fd2e3a1
FIX: start up,MUXSEL_HIPKD(PA19),MUXSEL_LOPKD(PA20) are floating state. Should adapt FPGA image aswell.
2018-02-07 12:08:50 +01:00
iceman1001
b39332e938
REM: 'hf 15 debug' removed command, unified with mf_debuglevel instead. The idea is to have ONE debug flag on deviceside.
2018-01-29 15:58:00 +01:00
iceman1001
c04ac4f9ac
ADD: 'hf felica reader' - added pm3 as FeliCa reader
...
ADD: raw commands - added the basis for sending RAW commands to FeliCa.
CHG: CRC16 rework, uses table based implementation. This will change more functions as I go on.
2018-01-29 13:42:02 +01:00
iceman1001
be82f9f018
DEL: 'hf mf sniff' - since it is very similar to 'hf 14a sniff' , I removed this command. The desired functionality will become a new 'hf list mf' option in the future.
2018-01-18 14:11:22 +01:00
iceman1001
5ea8f73547
FIX: cmd_send has wrong varible definitions, leading to loss of values.
2018-01-11 21:47:27 +01:00
iceman1001
eed271af5c
CHG: 'hw tune' tuning antenna now can handle bigger antennas than 65v, with shifting 9, it can measure up to 130v.
...
CHG: 'hw tune' - command output and layout changes. I think this is easier to read.
2018-01-09 14:53:17 +01:00
iceman1001
b578e55d17
chg: 'hf 14b snoop' renamed 'hf 14b sniff'...
...
In order to use one command for SNIFFING.. All snoop names will be renamed.
2018-01-06 21:12:28 +01:00
iceman1001
6e93ed80a3
chg: 'hf iclass sniff' - still problems with the dmabuffer
2018-01-02 19:10:55 +01:00