- output of debug messages caused communication failures due to timing issues.
hf mf dbg 4 now required to see these debug messages.
- changed help text for hf mf dbg
- fixed minor bugs in help texts for hf mf sim and hf mf ecset
- display "key A" or "key B" instead of "key=0" or "key=1 in hf mf sim
- tracing was not always enabled when starting hf mf sniff or hf 14a snoop
- ATQA was displayed in wrong byte order in hf mf sniff
- 4 Byte UIDs were displayed as 7 Byte UIDs (padded with 0x000000) in hf mf sniff
- same for logfile names.
- assignment (=) had been used instead of == in comparisons (shouldn't have been relevant though)
- fixed a circular buffer rollover bug in iso14443a.c
- fixed 7 Byte UID handling in hf mf sniff
- fixed "cannot append" error in hf mf sniff d
- fixed hint on mfkey32 in hf mf sim x
- fixed hf mf sniff sometimes showing rogue data from previous calloc
- improve snooping/sniffing by syncing modulation detector window with reader signal (hi_iso14443a.v)
- code cleanup of hi_iso14443a.v
- enhanced tracing: hf 14a list now shows meaningful timing information. With new option f it also shows the frame delay times (fdt)
- small fix for hf 14b list - it used to run into the trace trailer
- hf 14a sim now obeys iso14443 timing (fdt of 1172 or 1234 resp.)
Note: you need to flash FPGA as well.
More details in http://www.proxmark.org/forum/viewtopic.php?pid=9721#p9721
- PM: used GetCountMifare in MifareNested() for improved timing accuracy and to deliver better quality nonces
- PM: MifareNested now delivers exactly two different nonces to avoid time consuming multiple lfsr_recovery32() on client side
- Client: replaced quicksort by bucketsort in crapto1.c which is faster
- Client: use multithreading (two parallel calls to lfsr_recovery32())
- Client: fixed a small bug in mfnested() (always showed trgkey=0)
- Client: introduced a mutex for PrintAndLog() to avoid interlaced printing
Minor rework of hf mf chk:
- Avoid time consuming off/on cycles. Send a "halt" instead.
-According to ISO14443-4, the block number (bit 0) in the PCB needs to be flipped every once in a while. Not doing so leads to the card not responding to commands anymore. The flipping is done according to the standard now.
-Declare iso14_apdu in iso14443a.h to enable usage from other .c files
-iso14_apdu now returns 0 if ReaderReceive returned 0 (to distinguish between the case that ReaderReceive returns -1 and the case that it returns 0)
-Added a new function to change the timeout (to enable changing it from other .c files without the need for a global variable)
