ADD: Marshmellows fixes for the LF (demods) commands, (LF SEACH)
ADD: Holimans changes with hash1_brute
FIXES: minor fixes with some calls to "free" and redundant debug statement and code cleanup. removal of commented code.
FIX: a suggested patch for "hf mf csetuid" (https://github.com/Proxmark/proxmark3/issues/35)
FIX: fixed a bug in iso14443a_select_card where the len variable wasnt set, this made desfire/magic cards not work.
Applied PwPiwi's new parity fix.
Applied Marshmellw's fixes for FSKdemod (HID, IO)
FIX: a potential bigbuffer fault given pwpiwi's change inside lfops.c CmdIOdemodFSK & CmdHIDdemodFSK
FIX: change some "int" parameters to uint's.
FIX: changed the lfops.c - DoAcquisition125k_internal to respect pwpiwi's definitions of FREE_BUFFER_OFFSET
HEADS up: The ultralight functions hasn't been verified since pwpiwi's changes.
ADD: found some new default keys
ADD: changed alot of memorys buffers to use constant values. like usbbuffer sizes, tracelogs, etc etc
ADD: all changes Peter filmoore has in his pull request.
FIX: hf mf esave - now supports specifying 0,1,2,4 in card memory for the file to be saved.
ADD: data.h - added FILE_PATH_SIZE constant
ADD: hf legic load - a command help and checks for FILE_PATH_SIZE
ADD: hf legis save - now checks for FILE_PATH_SIZE
ADD: lf hitag - now checks for FILE_PATH_SIZE
ADD: util.c - AddLogLine now checks for FILE_PATH_SIZE
ADD: data load / save - now checks for FILE_PATH_SIZE
FIX: ui.c - added a case of closing a filehandle
FIX: hf mf cload / csave now checks for FILE_PATH_SIZE
FIX: armsrc/mifarecmd.c - adjusted the buffersize in MifareEMemget from 48 to USB_CMD_DATA_SIZE
Fix: removed a call to free, which I think made linux people unhappy during "lf t55xx rd 0"...
Add: "lf t55xx fsk" now kind of outputs binary from "FSK2a R/40 R/50"..
- hf mf rdsc (fix): didn't account for 16 block sectors, allowed max sector 63 instead of 39
- hf mf ecfill (add): added (optional) card size parameter and support for non 1K cards
- hf mf dump (add): added (optional) card size parameter and support for non 1K cards
- hf mf dump (fix): Access Condition 011 not handled correctly (tried to access with key A)
- hf mf restore (add): added (optional) card size parameter and support for non 1K cards
- hf mf nested (fix): didn't account for 16 block sectors, allowed max sector 63 instead of 39
- hf mf nested (fix): always dumped 16 keys to dumpkeys.bin instead of correct number
- hf mf chk (fix): always dumped 16 keys to dumpkeys.bin instead of correct number
- hf mf eget (fix): displayed three instead of one block
- hf mf eload (add): load 4K .eml files (but accepts 1K .eml files for backwards compatibility)
- hf mf esave (add): always save the whole emulator memory (4K) instead of 1K only
- hf mf ecfill (add): added (optional) card size parameter and support for non 1K cards
- output of debug messages caused communication failures due to timing issues.
hf mf dbg 4 now required to see these debug messages.
- changed help text for hf mf dbg
- fixed minor bugs in help texts for hf mf sim and hf mf ecset
- display "key A" or "key B" instead of "key=0" or "key=1 in hf mf sim
- tracing was not always enabled when starting hf mf sniff or hf 14a snoop
- ATQA was displayed in wrong byte order in hf mf sniff
- 4 Byte UIDs were displayed as 7 Byte UIDs (padded with 0x000000) in hf mf sniff
- same for logfile names.
- assignment (=) had been used instead of == in comparisons (shouldn't have been relevant though)
This is a new LF edge detection algorithm for the FPGA.
- It uses a low-pass IIR filter to clean the signal
(see https://fail0verflow.com/blog/2014/proxmark3-fpga-iir-filter.html)
- The algorithm is able to detect consecutive peaks in the same
direction
- It uses an envelope follower to dynamically adjust the peak thresholds
- The main threshold used in the envelope follower can be set from the ARM side
fpga/lf_edge_detect.v,
fpga/lp20khz_1MSa_iir_filter.v,
fpga/min_max_tracker.v: New file.
fpga/lo_edge_detect.v, fpga/fpga_lf.v: Modify accordingly.
armsrc/apps.h (FPGA_CMD_SET_USER_BYTE1,
FPGA_CMD_SET_EDGE_DETECT_THRESHOLD): New FPGA command.
fpga/fpga_lf.v: Modify accordingly/Add a 8bit user register.
fpga/fpga_lf.bit: Update accordingly.
fpga/tests: New directory for testbenches
fpga/tests/Makefile: New file. It compiles the testbenches
and runs all the tests by default (comparing with the golden output)
fpga/tests/tb_lp20khz_1MSa_iir_filter.v,
fpga/tests/tb_min_max_tracker.v,
fpga/tests/tb_lf_edge_detect.v: New testbenches
fpga/tests/plot_edgedetect.py: New script to plot the results from
the edge detection tests.
fpga/tests/tb_data: New directory for data and golden outputs
