* .h include only the strict minimum for their own parsing
* this forces all files to include explicitment their needs and not count on far streched dependencies
* this helps Makefile to rebuild only the minimum
* according to this rule, most standalone .h are now gone
* big app.h is gone
* remove seldom __cplusplus, if c++ happens, everything will have to be done properly anyway
* all unrequired include were removed
* split common/ into common/ (client+arm) and common_arm/ (os+bootloader)
* bring zlib to common/
* bring stuff not really/not yet used in common back to armsrc/ or client/
* bring liblua into client/
* bring uart into client/
* move some portions of code around (dbprint, protocols,...)
* rename unused files into *_disabled.[ch] to make it explicit
* rename soft Uarts between 14a, 14b and iclass, so a standalone could use several without clash
* remove PrintAndLogDevice
* move deprecated-hid-flasher from client to tools
* Makefiles
* treat deps in armsrc/ as in client/
* client: stop on warning (-Werror), same as for armsrc/
Tested on:
* all standalone modes
* Linux
* TestProxmark uses pingng
* New command CMD_CAPABILITIES to transmit capabilities from pm3 to host
* Use TestProxmark to retrieve capabilities with that new command
* CloseProxmark if TestProxmark fails
* Hide baudrate for USB and retrieve real baudrate from pm3 for BT
* using WITH_FPC:
* activate basic usart
* no double buffer for now, no interrupt
* usart_dataavailable/usart_readbuffer/usart_writebuffer, to demo it:
* pm3 client over USB, minicom over usart
* analyse a d 414243
* using WITH_FPC_HOST:
* it implies WITH_FPC as it's based on it
* control pm3 with client over usart
* EXPERIMENTAL! still some frame desync issues
* you can connect both from usart & USB with two pm3 clients
* actually you *have* to connect USB for the moment because
it's used to send debug messages about buggy usart... See Dbprintf_usb below
* "sessions": msgs are directed to the latest client to have sent a cmd
* Dbprintf_usb macro to send msgs to USB client to help debugging usart...
* We now have an option to run client at different speed as usart is 115200:
client/proxmark3 /dev/ttyUSB0 -b 115200
* Consequently, argc,argv handling is a bit revamped, it was so messy...
* USB and flashing are still at 460800, don't try flashing over usart yet ^^
