//-----------------------------------------------------------------------------
// Copyright (C) 2010 iZsh <izsh at fail0verflow.com>
//
// This code is licensed to you under the terms of the GNU GPL, version 2 or,
// at your option, any later version. See the LICENSE.txt file for the text of
// the license.
//-----------------------------------------------------------------------------
// Low frequency EM4x commands
//-----------------------------------------------------------------------------
#include "cmdlfem4x.h"
uint64_t g_em410xid = 0;
static int CmdHelp(const char *Cmd);
//////////////// 410x commands
int usage_lf_em410x_demod(void){
PrintAndLog("Usage: lf em 410x_demod [h] [clock] <0|1> [maxError]");
PrintAndLog("Options:");
PrintAndLog(" h - this help");
PrintAndLog(" clock - set clock as integer, optional, if not set, autodetect.");
PrintAndLog(" <0|1> - 0 normal output, 1 for invert output");
PrintAndLog(" maxerror - set maximum allowed errors, default = 100.");
PrintAndLog("");
PrintAndLog(" sample: lf em 410x_demod = demod an EM410x Tag ID from GraphBuffer");
PrintAndLog(" : lf em 410x_demod 32 = demod an EM410x Tag ID from GraphBuffer using a clock of RF/32");
PrintAndLog(" : lf em 410x_demod 32 1 = demod an EM410x Tag ID from GraphBuffer using a clock of RF/32 and inverting data");
PrintAndLog(" : lf em 410x_demod 1 = demod an EM410x Tag ID from GraphBuffer while inverting data");
PrintAndLog(" : lf em 410x_demod 64 1 0 = demod an EM410x Tag ID from GraphBuffer using a clock of RF/64 and inverting data and allowing 0 demod errors");
return 0;
}
int usage_lf_em410x_write(void) {
PrintAndLog("Writes EM410x ID to a T55x7 / T5555 (Q5) tag");
PrintAndLog("");
PrintAndLog("Usage: lf em 410x_write [h] <id> <card> [clock]");
PrintAndLog("Options:");
PrintAndLog(" h - this help");
PrintAndLog(" <id> - ID number");
PrintAndLog(" <card> - 0|1 T5555 (Q5) / T55x7");
PrintAndLog(" <clock> - 16|32|40|64, optional, set R/F clock rate, defaults to 64");
PrintAndLog("samples:");
PrintAndLog(" lf em 410x_write 0F0368568B");
return 0;
}
int usage_lf_em410x_ws(void) {
PrintAndLog("Watch 'nd Spoof, activates reader, waits until a EM410x tag gets presented then it starts simulating the found UID");
PrintAndLog("");
PrintAndLog("Usage: lf em 410x_spoof [h]");
PrintAndLog("Options:");
PrintAndLog(" h - this help");
PrintAndLog("samples:");
PrintAndLog(" lf em 410x_spoof");
return 0;
}
int usage_lf_em410x_clone(void) {
PrintAndLog("Simulating EM410x tag");
PrintAndLog("");
PrintAndLog("Usage: lf em 410x_clone [h] <uid> <clock>");
PrintAndLog("Options:");
PrintAndLog(" h - this help");
PrintAndLog(" uid - uid (10 HEX symbols)");
PrintAndLog(" clock - clock (32|64) (optional)");
PrintAndLog("samples:");
PrintAndLog(" lf em 410x_clone 0F0368568B");
PrintAndLog(" lf em 410x_clone 0F0368568B 32");
return 0;
}
int usage_lf_em410x_sim(void) {
PrintAndLog("Simulating EM410x tag");
PrintAndLog("");
PrintAndLog("Usage: lf em 410x_sim [h] <uid> <clock>");
PrintAndLog("Options:");
PrintAndLog(" h - this help");
PrintAndLog(" uid - uid (10 HEX symbols)");
PrintAndLog(" clock - clock (32|64) (optional)");
PrintAndLog("samples:");
PrintAndLog(" lf em 410x_sim 0F0368568B");
PrintAndLog(" lf em 410x_sim 0F0368568B 32");
return 0;
}
int usage_lf_em410x_brute(void) {
PrintAndLog("Bruteforcing by emulating EM410x tag");
PrintAndLog("");
PrintAndLog("Usage: lf em 410x_brute [h] ids.txt [d 2000] [c clock]");
PrintAndLog("Options:");
PrintAndLog(" h - this help");
PrintAndLog(" ids.txt - file with UIDs in HEX format, one per line");
PrintAndLog(" d (2000) - pause delay in milliseconds between UIDs simulation, default 1000 ms (optional)");
PrintAndLog(" c (32) - clock (32|64), default 64 (optional)");
PrintAndLog("samples:");
PrintAndLog(" lf em 410x_brute ids.txt");
PrintAndLog(" lf em 410x_brute ids.txt c 32");
PrintAndLog(" lf em 410x_brute ids.txt d 3000");
PrintAndLog(" lf em 410x_brute ids.txt d 3000 c 32");
return 0;
}
//////////////// 4050 / 4450 commands
int usage_lf_em4x50_dump(void) {
PrintAndLog("Dump EM4x50/EM4x69. Tag must be on antenna. ");
PrintAndLog("");
PrintAndLog("Usage: lf em 4x50_dump [h] <pwd>");
PrintAndLog("Options:");
PrintAndLog(" h - this help");
PrintAndLog(" pwd - password (hex) (optional)");
PrintAndLog("samples:");
PrintAndLog(" lf em 4x50_dump");
PrintAndLog(" lf em 4x50_dump 11223344");
return 0;
}
int usage_lf_em4x50_read(void) {
PrintAndLog("Read EM 4x50/EM4x69. Tag must be on antenna. ");
PrintAndLog("");
PrintAndLog("Usage: lf em 4x50_read [h] <address> <pwd>");
PrintAndLog("Options:");
PrintAndLog(" h - this help");
PrintAndLog(" address - memory address to read. (0-15)");
PrintAndLog(" pwd - password (hex) (optional)");
PrintAndLog("samples:");
PrintAndLog(" lf em 4x50_read 1");
PrintAndLog(" lf em 4x50_read 1 11223344");
return 0;
}
int usage_lf_em4x50_write(void) {
PrintAndLog("Write EM 4x50/4x69. Tag must be on antenna. ");
PrintAndLog("");
PrintAndLog("Usage: lf em 4x50_write [h] <address> <data> <pwd>");
PrintAndLog("Options:");
PrintAndLog(" h - this help");
PrintAndLog(" address - memory address to write to. (0-15)");
PrintAndLog(" data - data to write (hex)");
PrintAndLog(" pwd - password (hex) (optional)");
PrintAndLog("samples:");
PrintAndLog(" lf em 4x50_write 1 deadc0de");
PrintAndLog(" lf em 4x50_write 1 deadc0de 11223344");
return 0;
}
//////////////// 4205 / 4305 commands
int usage_lf_em4x05_dump(void) {
PrintAndLog("Dump EM4x05/EM4x69. Tag must be on antenna. ");
PrintAndLog("");
PrintAndLog("Usage: lf em 4x05_dump [h] <pwd>");
PrintAndLog("Options:");
PrintAndLog(" h - this help");
PrintAndLog(" pwd - password (hex) (optional)");
PrintAndLog("samples:");
PrintAndLog(" lf em 4x05_dump");
PrintAndLog(" lf em 4x05_dump 11223344");
return 0;
}
int usage_lf_em4x05_read(void) {
PrintAndLog("Read EM4x05/EM4x69. Tag must be on antenna. ");
PrintAndLog("");
PrintAndLog("Usage: lf em 4x05_read [h] <address> <pwd>");
PrintAndLog("Options:");
PrintAndLog(" h - this help");
PrintAndLog(" address - memory address to read. (0-15)");
PrintAndLog(" pwd - password (hex) (optional)");
PrintAndLog("samples:");
PrintAndLog(" lf em 4x05_read 1");
PrintAndLog(" lf em 4x05_read 1 11223344");
return 0;
}
int usage_lf_em4x05_write(void) {
PrintAndLog("Write EM4x05/4x69. Tag must be on antenna. ");
PrintAndLog("");
PrintAndLog("Usage: lf em 4x05_write [h] <address> <data> <pwd>");
PrintAndLog("Options:");
PrintAndLog(" h - this help");
PrintAndLog(" address - memory address to write to. (0-15)");
PrintAndLog(" data - data to write (hex)");
PrintAndLog(" pwd - password (hex) (optional)");
PrintAndLog("samples:");
PrintAndLog(" lf em 4x05_write 1 deadc0de");
PrintAndLog(" lf em 4x05_write 1 deadc0de 11223344");
return 0;
}
int usage_lf_em4x05_info(void) {
PrintAndLog("Tag information EM4205/4305/4469//4569 tags. Tag must be on antenna.");
PrintAndLog("");
PrintAndLog("Usage: lf em 4x05_info [h] <pwd>");
PrintAndLog("Options:");
PrintAndLog(" h - this help");
PrintAndLog(" pwd - password (hex) (optional)");
PrintAndLog("samples:");
PrintAndLog(" lf em 4x05_info");
PrintAndLog(" lf em 4x05_info deadc0de");
return 0;
}
/* Read the ID of an EM410x tag.
* Format:
* 1111 1111 1 <-- standard non-repeatable header
* XXXX [row parity bit] <-- 10 rows of 5 bits for our 40 bit tag ID
* ....
* CCCC <-- each bit here is parity for the 10 bits above in corresponding column
* 0 <-- stop bit, end of tag
*/
// Construct the graph for emulating an EM410X tag
void ConstructEM410xEmulGraph(const char *uid,const uint8_t clock) {
int i, n, j, binary[4], parity[4];
/* clear our graph */
ClearGraph(0);
/* write 9 start bits */
for (i = 0; i < 9; i++)
AppendGraph(0, clock, 1);
/* for each hex char */
parity[0] = parity[1] = parity[2] = parity[3] = 0;
for (i = 0; i < 10; i++){
/* read each hex char */
sscanf(&uid[i], "%1x", &n);
for (j = 3; j >= 0; j--, n/= 2)
binary[j] = n % 2;
/* append each bit */
AppendGraph(0, clock, binary[0]);
AppendGraph(0, clock, binary[1]);
AppendGraph(0, clock, binary[2]);
AppendGraph(0, clock, binary[3]);
/* append parity bit */
AppendGraph(0, clock, binary[0] ^ binary[1] ^ binary[2] ^ binary[3]);
/* keep track of column parity */
parity[0] ^= binary[0];
parity[1] ^= binary[1];
parity[2] ^= binary[2];
parity[3] ^= binary[3];
}
/* parity columns */
AppendGraph(0, clock, parity[0]);
AppendGraph(0, clock, parity[1]);
AppendGraph(0, clock, parity[2]);
AppendGraph(0, clock, parity[3]);
/* stop bit */
AppendGraph(1, clock, 0);
}
//by marshmellow
//print 64 bit EM410x ID in multiple formats
void printEM410x(uint32_t hi, uint64_t id) {
if (!id && !hi) return;
PrintAndLog("EM410x %s pattern found", (hi) ? "XL" : "" );
uint64_t iii=1;
uint64_t id2lo=0;
uint32_t ii=0;
uint32_t i=0;
for (ii=5; ii>0;ii--){
for (i=0;i<8;i++){
id2lo=(id2lo<<1LL) | ((id & (iii << (i+((ii-1)*8)))) >> (i+((ii-1)*8)));
}
}
if (hi){
//output 88 bit em id
PrintAndLog("\nEM TAG ID : %06X%016" PRIX64, hi, id);
} else {
//output 40 bit em id
PrintAndLog("\nEM TAG ID : %010" PRIX64, id);
PrintAndLog("\nPossible de-scramble patterns");
PrintAndLog("Unique TAG ID : %010" PRIX64, id2lo);
PrintAndLog("HoneyWell IdentKey {");
PrintAndLog("DEZ 8 : %08" PRIu64, id & 0xFFFFFF);
PrintAndLog("DEZ 10 : %010" PRIu64, id & 0xFFFFFFFF);
PrintAndLog("DEZ 5.5 : %05" PRIu64 ".%05" PRIu64, (id>>16LL) & 0xFFFF, (id & 0xFFFF));
PrintAndLog("DEZ 3.5A : %03" PRIu64 ".%05" PRIu64, (id>>32ll), (id & 0xFFFF));
PrintAndLog("DEZ 3.5B : %03" PRIu64 ".%05" PRIu64, (id & 0xFF000000) >> 24, (id & 0xFFFF));
PrintAndLog("DEZ 3.5C : %03" PRIu64 ".%05" PRIu64, (id & 0xFF0000) >> 16, (id & 0xFFFF));
PrintAndLog("DEZ 14/IK2 : %014" PRIu64, id);
PrintAndLog("DEZ 15/IK3 : %015" PRIu64, id2lo);
PrintAndLog("DEZ 20/ZK : %02" PRIu64 "%02" PRIu64 "%02" PRIu64 "%02" PRIu64 "%02" PRIu64 "%02" PRIu64 "%02" PRIu64 "%02" PRIu64 "%02" PRIu64 "%02" PRIu64,
(id2lo & 0xf000000000) >> 36,
(id2lo & 0x0f00000000) >> 32,
(id2lo & 0x00f0000000) >> 28,
(id2lo & 0x000f000000) >> 24,
(id2lo & 0x0000f00000) >> 20,
(id2lo & 0x00000f0000) >> 16,
(id2lo & 0x000000f000) >> 12,
(id2lo & 0x0000000f00) >> 8,
(id2lo & 0x00000000f0) >> 4,
(id2lo & 0x000000000f)
);
uint64_t paxton = (((id>>32) << 24) | (id & 0xffffff)) + 0x143e00;
PrintAndLog("}\nOther : %05" PRIu64 "_%03" PRIu64 "_%08" PRIu64, (id&0xFFFF), ((id>>16LL) & 0xFF), (id & 0xFFFFFF));
PrintAndLog("Pattern Paxton : %" PRIu64 " [0x%" PRIX64 "]", paxton, paxton);
uint32_t p1id = (id & 0xFFFFFF);
uint8_t arr[32] = {0x00};
int i =0;
int j = 23;
for (; i < 24; ++i, --j ){
arr[i] = (p1id >> i) & 1;
}
uint32_t p1 = 0;
p1 |= arr[23] << 21;
p1 |= arr[22] << 23;
p1 |= arr[21] << 20;
p1 |= arr[20] << 22;
p1 |= arr[19] << 18;
p1 |= arr[18] << 16;
p1 |= arr[17] << 19;
p1 |= arr[16] << 17;
p1 |= arr[15] << 13;
p1 |= arr[14] << 15;
p1 |= arr[13] << 12;
p1 |= arr[12] << 14;
p1 |= arr[11] << 6;
p1 |= arr[10] << 2;
p1 |= arr[9] << 7;
p1 |= arr[8] << 1;
p1 |= arr[7] << 0;
p1 |= arr[6] << 8;
p1 |= arr[5] << 11;
p1 |= arr[4] << 3;
p1 |= arr[3] << 10;
p1 |= arr[2] << 4;
p1 |= arr[1] << 5;
p1 |= arr[0] << 9;
PrintAndLog("Pattern 1 : %d [0x%X]", p1, p1);
uint16_t sebury1 = id & 0xFFFF;
uint8_t sebury2 = (id >> 16) & 0x7F;
uint32_t sebury3 = id & 0x7FFFFF;
PrintAndLog("Pattern Sebury : %d %d %d [0x%X 0x%X 0x%X]", sebury1, sebury2, sebury3, sebury1, sebury2, sebury3);
}
}
/* Read the ID of an EM410x tag.
* Format:
* 1111 1111 1 <-- standard non-repeatable header
* XXXX [row parity bit] <-- 10 rows of 5 bits for our 40 bit tag ID
* ....
* CCCC <-- each bit here is parity for the 10 bits above in corresponding column
* 0 <-- stop bit, end of tag
*/
int AskEm410xDecode(bool verbose, uint32_t *hi, uint64_t *lo ) {
size_t idx = 0;
uint8_t bits[512] = {0};
size_t size = sizeof(bits);
if ( !getDemodBuf(bits, &size) ) {
PrintAndLog("DEBUG: Error - Em410x problem during copy from ASK demod");
return 0;
}
int ans = Em410xDecode(bits, &size, &idx, hi, lo);
if ( ans < 0){
if (g_debugMode){
if (ans == -1)
PrintAndLog("DEBUG: Error - Em410x not only 0|1 in decoded bitstream");
else if (ans == -2)
PrintAndLog("DEBUG: Error - Em410x not enough samples after demod");
else if (ans == -4)
PrintAndLog("DEBUG: Error - Em410x preamble not found");
else if (ans == -5)
PrintAndLog("DEBUG: Error - Em410x Size not correct: %d", size);
else if (ans == -6)
PrintAndLog("DEBUG: Error - Em410x parity failed");
}
return 0;
}
if (!lo && !hi) {
PrintAndLog("DEBUG: Error - Em410x decoded to all zeros");
return 0;
}
//set GraphBuffer for clone or sim command
setDemodBuf(DemodBuffer, (size==40) ? 64 : 128, idx+1);
setClockGrid(g_DemodClock, g_DemodStartIdx + ((idx+1)*g_DemodClock));
if (g_debugMode){
PrintAndLog("DEBUG: Em410x idx: %d, Len: %d, Printing Demod Buffer:", idx, size);
printDemodBuff();
}
if (verbose)
printEM410x(*hi, *lo);
return 1;
}
int AskEm410xDemod(const char *Cmd, uint32_t *hi, uint64_t *lo, bool verbose) {
bool st = true;
if (!ASKDemod_ext(Cmd, false, false, 1, &st)) return 0;
return AskEm410xDecode(verbose, hi, lo);
}
// this read is the "normal" read, which download lf signal and tries to demod here.
int CmdEM410xRead(const char *Cmd) {
lf_read(true, 8192);
CmdEM410xDemod(Cmd);
return 0;
}
// this read loops on device side.
// uses the demod in lfops.c
int CmdEM410xRead_device(const char *Cmd) {
char cmdp = param_getchar(Cmd, 0);
uint8_t findone = (cmdp == '1') ? 1 : 0;
UsbCommand c = {CMD_EM410X_DEMOD, {findone, 0, 0}};
SendCommand(&c);
return 0;
}
//by marshmellow
//takes 3 arguments - clock, invert and maxErr as integers
//attempts to demodulate ask while decoding manchester
//prints binary found and saves in graphbuffer for further commands
int CmdEM410xDemod(const char *Cmd) {
char cmdp = param_getchar(Cmd, 0);
if (strlen(Cmd) > 10 || cmdp == 'h' || cmdp == 'H') return usage_lf_em410x_demod();
uint32_t hi = 0;
uint64_t lo = 0;
if(AskEm410xDemod(Cmd, &hi, &lo, true) != 1) return 0;
g_em410xid = lo;
return 1;
}
// emulate an EM410X tag
int CmdEM410xSim(const char *Cmd) {
char cmdp = param_getchar(Cmd, 0);
if (cmdp == 'h' || cmdp == 'H') return usage_lf_em410x_sim();
uint8_t uid[5] = {0x00};
/* clock is 64 in EM410x tags */
uint8_t clock = 64;
if (param_gethex(Cmd, 0, uid, 10)) {
PrintAndLog("UID must include 10 HEX symbols");
return 0;
}
param_getdec(Cmd, 1, &clock);
PrintAndLog("Starting simulating UID %02X%02X%02X%02X%02X clock: %d", uid[0],uid[1],uid[2],uid[3],uid[4],clock);
PrintAndLog("Press pm3-button to abort simulation");
ConstructEM410xEmulGraph(Cmd, clock);
CmdLFSim("0"); //240 start_gap.
return 0;
}
int CmdEM410xBrute(const char *Cmd) {
char filename[FILE_PATH_SIZE] = {0};
FILE *f = NULL;
char buf[11];
uint32_t uidcnt = 0;
uint8_t stUidBlock = 20;
uint8_t *uidBlock = NULL, *p = NULL;
uint8_t uid[5] = {0x00};
/* clock is 64 in EM410x tags */
uint8_t clock = 64;
/* default pause time: 1 second */
uint32_t delay = 1000;
char cmdp = param_getchar(Cmd, 0);
if (cmdp == 'h' || cmdp == 'H') return usage_lf_em410x_brute();
cmdp = param_getchar(Cmd, 1);
if (cmdp == 'd' || cmdp == 'D') {
delay = param_get32ex(Cmd, 2, 1000, 10);
param_getdec(Cmd, 4, &clock);
} else if (cmdp == 'c' || cmdp == 'C') {
param_getdec(Cmd, 2, &clock);
delay = param_get32ex(Cmd, 4, 1000, 10);
}
param_getstr(Cmd, 0, filename);
if (strlen(filename) == 0) {
PrintAndLog("Error: Please specify a filename");
return 1;
}
if ((f = fopen(filename, "r")) == NULL) {
PrintAndLog("Error: Could not open UIDs file [%s]", filename);
return 1;
}
uidBlock = calloc(stUidBlock, 5);
if (uidBlock == NULL) return 1;
while( fgets(buf, sizeof(buf), f) ) {
if (strlen(buf) < 10 || buf[9] == '\n') continue;
while (fgetc(f) != '\n' && !feof(f)); //goto next line
//The line start with # is comment, skip
if( buf[0]=='#' ) continue;
if (param_gethex(buf, 0, uid, 10)) {
PrintAndLog("UIDs must include 10 HEX symbols");
free(uidBlock);
fclose(f);
return 1;
}
buf[10] = 0;
if ( stUidBlock - uidcnt < 2) {
p = realloc(uidBlock, 5 * (stUidBlock += 10) );
if (!p) {
PrintAndLog("Cannot allocate memory for UIDs");
free(uidBlock);
fclose(f);
return 1;
}
uidBlock = p;
}
memset(uidBlock + 5 * uidcnt, 0, 5);
num_to_bytes(strtoll(buf, NULL, 16), 5, uidBlock + 5 * uidcnt);
uidcnt++;
memset(buf, 0, sizeof(buf));
}
fclose(f);
if (uidcnt == 0) {
PrintAndLog("No UIDs found in file");
free(uidBlock);
return 1;
}
PrintAndLog("Loaded %d UIDs from %s, pause delay: %d ms", uidcnt, filename, delay);
// loop
for(uint32_t c = 0; c < uidcnt; ++c ) {
char testuid[11];
testuid[10] = 0;
if (ukbhit()) {
int gc = getchar(); (void)gc;
printf("\nAborted via keyboard!\n");
free(uidBlock);
return 0;
}
sprintf(testuid, "%010" PRIX64, bytes_to_num(uidBlock + 5*c, 5));
PrintAndLog("Bruteforce %d / %d: simulating UID %s, clock %d", c + 1, uidcnt, testuid, clock);
ConstructEM410xEmulGraph(testuid, clock);
CmdLFSim("0"); //240 start_gap.
msleep(delay);
}
free(uidBlock);
return 0;
}
/* Function is equivalent of lf read + data samples + em410xread
* looped until an EM410x tag is detected
*
* Why is CmdSamples("16000")?
* TBD: Auto-grow sample size based on detected sample rate. IE: If the
* rate gets lower, then grow the number of samples
* Changed by martin, 4000 x 4 = 16000,
* see http://www.proxmark.org/forum/viewtopic.php?pid=7235#p7235
*
* EDIT -- capture enough to get 2 complete preambles at the slowest data rate known to be used (rf/64) (64*64*2+9 = 8201) marshmellow
*/
int CmdEM410xWatch(const char *Cmd) {
do {
if (ukbhit()) {
int gc = getchar(); (void)gc;
printf("\naborted via keyboard!\n");
break;
}
lf_read(true, 8201);
} while (!CmdEM410xRead(""));
return 0;
}
//currently only supports manchester modulations
int CmdEM410xWatchnSpoof(const char *Cmd) {
char cmdp = param_getchar(Cmd, 0);
if (cmdp == 'h' || cmdp == 'H') return usage_lf_em410x_ws();
// loops if the captured ID was in XL-format.
CmdEM410xWatch(Cmd);
PrintAndLog("# Replaying captured ID: %010" PRIx64 , g_em410xid);
CmdLFaskSim("");
return 0;
}
int CmdEM410xWrite(const char *Cmd) {
char cmdp = param_getchar(Cmd, 0);
if (cmdp == 'h' || cmdp == 'H') return usage_lf_em410x_write();
uint64_t id = 0xFFFFFFFFFFFFFFFF; // invalid id value
int card = 0xFF; // invalid card value
uint32_t clock = 0; // invalid clock value
sscanf(Cmd, "%" SCNx64 " %d %d", &id, &card, &clock);
// Check ID
if (id == 0xFFFFFFFFFFFFFFFF) {
PrintAndLog("Error! ID is required.\n");
return 0;
}
if (id >= 0x10000000000) {
PrintAndLog("Error! Given EM410x ID is longer than 40 bits.\n");
return 0;
}
// Check Card
if (card == 0xFF) {
PrintAndLog("Error! Card type required.\n");
return 0;
}
if (card < 0) {
PrintAndLog("Error! Bad card type selected.\n");
return 0;
}
// Check Clock
if (clock == 0)
clock = 64;
// Allowed clock rates: 16, 32, 40 and 64
if ((clock != 16) && (clock != 32) && (clock != 64) && (clock != 40)) {
PrintAndLog("Error! Clock rate %d not valid. Supported clock rates are 16, 32, 40 and 64.\n", clock);
return 0;
}
if (card == 1) {
PrintAndLog("Writing %s tag with UID 0x%010" PRIx64 " (clock rate: %d)", "T55x7", id, clock);
// NOTE: We really should pass the clock in as a separate argument, but to
// provide for backwards-compatibility for older firmware, and to avoid
// having to add another argument to CMD_EM410X_WRITE_TAG, we just store
// the clock rate in bits 8-15 of the card value
card = (card & 0xFF) | ((clock << 8) & 0xFF00);
} else if (card == 0) {
PrintAndLog("Writing %s tag with UID 0x%010" PRIx64, "T5555", id, clock);
card = (card & 0xFF) | ((clock << 8) & 0xFF00);
} else {
PrintAndLog("Error! Bad card type selected.\n");
return 0;
}
UsbCommand c = {CMD_EM410X_WRITE_TAG, {card, (uint32_t)(id >> 32), (uint32_t)id}};
SendCommand(&c);
return 0;
}
//**************** Start of EM4x50 Code ************************
bool EM_EndParityTest(uint8_t *BitStream, size_t size, uint8_t rows, uint8_t cols, uint8_t pType) {
if (rows*cols>size) return false;
uint8_t colP=0;
//assume last col is a parity and do not test
for (uint8_t colNum = 0; colNum < cols-1; colNum++) {
for (uint8_t rowNum = 0; rowNum < rows; rowNum++) {
colP ^= BitStream[(rowNum*cols)+colNum];
}
if (colP != pType) return false;
}
return true;
}
bool EM_ByteParityTest(uint8_t *BitStream, size_t size, uint8_t rows, uint8_t cols, uint8_t pType) {
if (rows*cols>size) return false;
uint8_t rowP=0;
//assume last row is a parity row and do not test
for (uint8_t rowNum = 0; rowNum < rows-1; rowNum++) {
for (uint8_t colNum = 0; colNum < cols; colNum++) {
rowP ^= BitStream[(rowNum*cols)+colNum];
}
if (rowP != pType) return false;
}
return true;
}
// EM word parity test.
// 9*5 = 45 bits in total
// 012345678|r1
// 012345678|r2
// 012345678|r3
// 012345678|r4
// ------------
//c012345678| 0
// |- must be zero
bool EMwordparitytest(uint8_t *bits){
// last row/col parity must be 0
if (bits[44] != 0 ) return false;
// col parity check
uint8_t c1 = bytebits_to_byte(bits, 8) ^ bytebits_to_byte(bits+9, 8) ^ bytebits_to_byte(bits+18, 8) ^ bytebits_to_byte(bits+27, 8);
uint8_t c2 = bytebits_to_byte(bits+36, 8);
if ( c1 != c2 ) return false;
// row parity check
uint8_t rowP = 0;
for ( uint8_t i = 0; i < 36; ++i ) {
rowP ^= bits[i];
if ( i>0 && (i % 9) == 0) {
if ( rowP != EVEN )
return false;
rowP = 0;
}
}
// all checks ok.
return true;
}
//////////////// 4050 / 4450 commands
uint32_t OutputEM4x50_Block(uint8_t *BitStream, size_t size, bool verbose, bool pTest) {
if (size<45) return 0;
uint32_t code = bytebits_to_byte(BitStream,8);
code = code<<8 | bytebits_to_byte(BitStream+9,8);
code = code<<8 | bytebits_to_byte(BitStream+18,8);
code = code<<8 | bytebits_to_byte(BitStream+27,8);
if (verbose || g_debugMode){
for (uint8_t i = 0; i<5; i++){
if (i == 4) PrintAndLog(""); //parity byte spacer
PrintAndLog("%d%d%d%d%d%d%d%d %d -> 0x%02x",
BitStream[i*9],
BitStream[i*9+1],
BitStream[i*9+2],
BitStream[i*9+3],
BitStream[i*9+4],
BitStream[i*9+5],
BitStream[i*9+6],
BitStream[i*9+7],
BitStream[i*9+8],
bytebits_to_byte(BitStream+i*9,8)
);
}
if (pTest)
PrintAndLog("Parity Passed");
else
PrintAndLog("Parity Failed");
}
return code;
}
/* Read the transmitted data of an EM4x50 tag from the graphbuffer
* Format:
*
* XXXXXXXX [row parity bit (even)] <- 8 bits plus parity
* XXXXXXXX [row parity bit (even)] <- 8 bits plus parity
* XXXXXXXX [row parity bit (even)] <- 8 bits plus parity
* XXXXXXXX [row parity bit (even)] <- 8 bits plus parity
* CCCCCCCC <- column parity bits
* 0 <- stop bit
* LW <- Listen Window
*
* This pattern repeats for every block of data being transmitted.
* Transmission starts with two Listen Windows (LW - a modulated
* pattern of 320 cycles each (32/32/128/64/64)).
*
* Note that this data may or may not be the UID. It is whatever data
* is stored in the blocks defined in the control word First and Last
* Word Read values. UID is stored in block 32.
*/
//completed by Marshmellow
int EM4x50Read(const char *Cmd, bool verbose) {
uint8_t fndClk[] = {8,16,32,40,50,64,128};
int clk = 0;
int invert = 0;
int tol = 0;
int i, j, startblock, skip, block, start, end, low, high, minClk;
bool complete = false;
int tmpbuff[MAX_GRAPH_TRACE_LEN / 64];
uint32_t Code[6];
char tmp[6];
char tmp2[20];
int phaseoff;
high = low = 0;
memset(tmpbuff, 0, sizeof(tmpbuff) );
// get user entry if any
sscanf(Cmd, "%i %i", &clk, &invert);
// first get high and low values
for (i = 0; i < GraphTraceLen; i++) {
if (GraphBuffer[i] > high)
high = GraphBuffer[i];
else if (GraphBuffer[i] < low)
low = GraphBuffer[i];
}
i = 0;
j = 0;
minClk = 255;
// get to first full low to prime loop and skip incomplete first pulse
while ((GraphBuffer[i] < high) && (i < GraphTraceLen))
++i;
while ((GraphBuffer[i] > low) && (i < GraphTraceLen))
++i;
skip = i;
// populate tmpbuff buffer with pulse lengths
while (i < GraphTraceLen) {
// measure from low to low
while ((GraphBuffer[i] > low) && (i < GraphTraceLen))
++i;
start= i;
while ((GraphBuffer[i] < high) && (i < GraphTraceLen))
++i;
while ((GraphBuffer[i] > low) && (i < GraphTraceLen))
++i;
if (j>=(MAX_GRAPH_TRACE_LEN/64)) {
break;
}
tmpbuff[j++]= i - start;
if (i-start < minClk && i < GraphTraceLen) {
minClk = i - start;
}
}
// set clock
if (!clk) {
for (uint8_t clkCnt = 0; clkCnt<7; clkCnt++) {
tol = fndClk[clkCnt]/8;
if (minClk >= fndClk[clkCnt]-tol && minClk <= fndClk[clkCnt]+1) {
clk=fndClk[clkCnt];
break;
}
}
if (!clk) {
if (verbose || g_debugMode) PrintAndLog("ERROR: EM4x50 - didn't find a clock");
return 0;
}
} else tol = clk/8;
// look for data start - should be 2 pairs of LW (pulses of clk*3,clk*2)
start = -1;
for (i= 0; i < j - 4 ; ++i) {
skip += tmpbuff[i];
if (tmpbuff[i] >= clk*3-tol && tmpbuff[i] <= clk*3+tol) //3 clocks
if (tmpbuff[i+1] >= clk*2-tol && tmpbuff[i+1] <= clk*2+tol) //2 clocks
if (tmpbuff[i+2] >= clk*3-tol && tmpbuff[i+2] <= clk*3+tol) //3 clocks
if (tmpbuff[i+3] >= clk-tol) //1.5 to 2 clocks - depends on bit following
{
start= i + 4;
break;
}
}
startblock = i + 4;
// skip over the remainder of LW
skip += tmpbuff[i+1] + tmpbuff[i+2] + clk;
if (tmpbuff[i+3]>clk)
phaseoff = tmpbuff[i+3]-clk;
else
phaseoff = 0;
// now do it again to find the end
end = skip;
for (i += 3; i < j - 4 ; ++i) {
end += tmpbuff[i];
if (tmpbuff[i] >= clk*3-tol && tmpbuff[i] <= clk*3+tol) //3 clocks
if (tmpbuff[i+1] >= clk*2-tol && tmpbuff[i+1] <= clk*2+tol) //2 clocks
if (tmpbuff[i+2] >= clk*3-tol && tmpbuff[i+2] <= clk*3+tol) //3 clocks
if (tmpbuff[i+3] >= clk-tol) //1.5 to 2 clocks - depends on bit following
{
complete= true;
break;
}
}
end = i;
// report back
if (verbose || g_debugMode) {
if (start >= 0) {
PrintAndLog("\nNote: one block = 50 bits (32 data, 12 parity, 6 marker)");
} else {
PrintAndLog("No data found!, clock tried:%d",clk);
PrintAndLog("Try again with more samples.");
PrintAndLog(" or after a 'data askedge' command to clean up the read");
return 0;
}
} else if (start < 0) return 0;
start = skip;
snprintf(tmp2, sizeof(tmp2),"%d %d 1000 %d", clk, invert, clk*47);
// save GraphBuffer - to restore it later
save_restoreGB(GRAPH_SAVE);
// get rid of leading crap
snprintf(tmp, sizeof(tmp), "%i", skip);
CmdLtrim(tmp);
bool pTest;
bool AllPTest = true;
// now work through remaining buffer printing out data blocks
block = 0;
i = startblock;
while (block < 6) {
if (verbose || g_debugMode) PrintAndLog("\nBlock %i:", block);
skip = phaseoff;
// look for LW before start of next block
for ( ; i < j - 4 ; ++i) {
skip += tmpbuff[i];
if (tmpbuff[i] >= clk*3-tol && tmpbuff[i] <= clk*3+tol)
if (tmpbuff[i+1] >= clk-tol)
break;
}
if (i >= j-4) break; //next LW not found
skip += clk;
if (tmpbuff[i+1]>clk)
phaseoff = tmpbuff[i+1]-clk;
else
phaseoff = 0;
i += 2;
if (ASKDemod(tmp2, false, false, 1) < 1) {
save_restoreGB(GRAPH_RESTORE);
return 0;
}
//set DemodBufferLen to just one block
DemodBufferLen = skip/clk;
//test parities
pTest = EM_ByteParityTest(DemodBuffer,DemodBufferLen,5,9,0);
pTest &= EM_EndParityTest(DemodBuffer,DemodBufferLen,5,9,0);
AllPTest &= pTest;
//get output
Code[block] = OutputEM4x50_Block(DemodBuffer,DemodBufferLen,verbose, pTest);
if (g_debugMode) PrintAndLog("\nskipping %d samples, bits:%d", skip, skip/clk);
//skip to start of next block
snprintf(tmp,sizeof(tmp),"%i",skip);
CmdLtrim(tmp);
block++;
if (i >= end) break; //in case chip doesn't output 6 blocks
}
//print full code:
if (verbose || g_debugMode || AllPTest){
if (!complete) {
PrintAndLog("*** Warning!");
PrintAndLog("Partial data - no end found!");
PrintAndLog("Try again with more samples.");
}
PrintAndLog("Found data at sample: %i - using clock: %i", start, clk);
end = block;
for (block=0; block < end; block++){
PrintAndLog("Block %d: %08x",block,Code[block]);
}
if (AllPTest) {
PrintAndLog("Parities Passed");
} else {
PrintAndLog("Parities Failed");
PrintAndLog("Try cleaning the read samples with 'data askedge'");
}
}
//restore GraphBuffer
save_restoreGB(GRAPH_RESTORE);
return (int)AllPTest;
}
int CmdEM4x50Read(const char *Cmd) {
uint8_t ctmp = param_getchar(Cmd, 0);
if ( ctmp == 'H' || ctmp == 'h' ) return usage_lf_em4x50_read();
return EM4x50Read(Cmd, true);
}
int CmdEM4x50Write(const char *Cmd){
uint8_t ctmp = param_getchar(Cmd, 0);
if ( ctmp == 'H' || ctmp == 'h' ) return usage_lf_em4x50_write();
PrintAndLog("no implemented yet");
return 0;
}
int CmdEM4x50Dump(const char *Cmd){
uint8_t ctmp = param_getchar(Cmd, 0);
if ( ctmp == 'H' || ctmp == 'h' ) return usage_lf_em4x50_dump();
PrintAndLog("no implemented yet");
return 0;
}
#define EM_PREAMBLE_LEN 6
// download samples from device and copy to Graphbuffer
bool downloadSamplesEM(){
// 8 bit preamble + 32 bit word response (max clock (128) * 40bits = 5120 samples)
uint8_t got[6000];
GetFromBigBuf(got, sizeof(got), 0);
if ( !WaitForResponseTimeout(CMD_ACK, NULL, 2500) ) {
PrintAndLog("command execution time out");
return false;
}
setGraphBuf(got, sizeof(got));
return true;
}
// em_demod
bool doPreambleSearch(size_t *startIdx){
// sanity check
if ( DemodBufferLen < EM_PREAMBLE_LEN) {
if (g_debugMode) PrintAndLog("DEBUG: Error - EM4305 demodbuffer too small");
return false;
}
// set size to 20 to only test first 14 positions for the preamble
size_t size = (20 > DemodBufferLen) ? DemodBufferLen : 20;
*startIdx = 0;
// skip first two 0 bits as they might have been missed in the demod
uint8_t preamble[EM_PREAMBLE_LEN] = {0,0,1,0,1,0};
if ( !preambleSearchEx(DemodBuffer, preamble, EM_PREAMBLE_LEN, &size, startIdx, true)) {
if (g_debugMode) PrintAndLog("DEBUG: Error - EM4305 preamble not found :: %d", *startIdx);
return false;
}
return true;
}
bool detectFSK(){
// detect fsk clock
if (!GetFskClock("", false, false)) {
if (g_debugMode) PrintAndLog("DEBUG: Error - EM: FSK clock failed");
return false;
}
// demod
int ans = FSKrawDemod("0 0", false);
if (!ans) {
if (g_debugMode) PrintAndLog("DEBUG: Error - EM: FSK Demod failed");
return false;
}
return true;
}
// PSK clocks should be easy to detect ( but difficult to demod a non-repeating pattern... )
bool detectPSK(){
int ans = GetPskClock("", false, false);
if (ans <= 0) {
if (g_debugMode) PrintAndLog("DEBUG: Error - EM: PSK clock failed");
return false;
}
//demod
//try psk1 -- 0 0 6 (six errors?!?)
ans = PSKDemod("0 0 6", false);
if (!ans) {
if (g_debugMode) PrintAndLog("DEBUG: Error - EM: PSK1 Demod failed");
//try psk1 inverted
ans = PSKDemod("0 1 6", false);
if (!ans) {
if (g_debugMode) PrintAndLog("DEBUG: Error - EM: PSK1 inverted Demod failed");
return false;
}
}
// either PSK1 or PSK1 inverted is ok from here.
// lets check PSK2 later.
return true;
}
// try manchester - NOTE: ST only applies to T55x7 tags.
bool detectASK_MAN(){
bool stcheck = false;
if ( !ASKDemod_ext("0 0 0", false, false, 1, &stcheck) ) {
if (g_debugMode) PrintAndLog("DEBUG: Error - EM: ASK/Manchester Demod failed");
return false;
}
return true;
}
bool detectASK_BI(){
int ans = ASKbiphaseDemod("0 0 1", false);
if (!ans) {
if (g_debugMode) PrintAndLog("DEBUG: Error - EM: ASK/biphase normal demod failed");
ans = ASKbiphaseDemod("0 1 1", false);
if (!ans) {
if (g_debugMode) PrintAndLog("DEBUG: Error - EM: ASK/biphase inverted demod failed");
return false;
}
}
return true;
}
// param: idx - start index in demoded data.
bool setDemodBufferEM(uint32_t *word, size_t idx){
//test for even parity bits.
uint8_t parity[45] = {0};
memcpy( parity, DemodBuffer, 45);
if (!EMwordparitytest(parity) ){
if (g_debugMode) PrintAndLog("DEBUG: Error - EM Parity tests failed");
return false;
}
// test for even parity bits and remove them. (leave out the end row of parities so 36 bits)
if (!removeParity(DemodBuffer, idx + EM_PREAMBLE_LEN, 9, 0, 36)) {
if (g_debugMode) PrintAndLog("DEBUG: Error - EM, failed removing parity");
return false;
}
setDemodBuf(DemodBuffer, 32, 0);
*word = bytebits_to_byteLSBF(DemodBuffer, 32);
return true;
}
// FSK, PSK, ASK/MANCHESTER, ASK/BIPHASE, ASK/DIPHASE
// should cover 90% of known used configs
// the rest will need to be manually demoded for now...
bool demodEM4x05resp(uint32_t *word) {
size_t idx = 0;
*word = 0;
if (detectASK_MAN() && doPreambleSearch( &idx ))
return setDemodBufferEM(word, idx);
if (detectASK_BI() && doPreambleSearch( &idx ))
return setDemodBufferEM(word, idx);
if (detectFSK() && doPreambleSearch( &idx ))
return setDemodBufferEM(word, idx);
if (detectPSK()) {
if (doPreambleSearch( &idx ))
return setDemodBufferEM(word, idx);
psk1TOpsk2(DemodBuffer, DemodBufferLen);
if (doPreambleSearch( &idx ))
return setDemodBufferEM(word, idx);
}
return false;
}
//////////////// 4205 / 4305 commands
int EM4x05ReadWord_ext(uint8_t addr, uint32_t pwd, bool usePwd, uint32_t *word) {
UsbCommand c = {CMD_EM4X_READ_WORD, {addr, pwd, usePwd}};
clearCommandBuffer();
SendCommand(&c);
UsbCommand resp;
if (!WaitForResponseTimeout(CMD_ACK, &resp, 2500)){
PrintAndLog("Command timed out");
return -1;
}
if ( !downloadSamplesEM() ) {
return -1;
}
int testLen = (GraphTraceLen < 1000) ? GraphTraceLen : 1000;
if (is_justnoise(GraphBuffer, testLen)) {
PrintAndLog("no tag found");
return -1;
}
return demodEM4x05resp(word);
}
int CmdEM4x05Dump(const char *Cmd) {
uint8_t addr = 0;
uint32_t pwd = 0;
bool usePwd = false;
uint8_t ctmp = param_getchar(Cmd, 0);
if ( ctmp == 'H' || ctmp == 'h' ) return usage_lf_em4x05_dump();
// for now use default input of 1 as invalid (unlikely 1 will be a valid password...)
pwd = param_get32ex(Cmd, 0, 1, 16);
if ( pwd != 1 )
usePwd = true;
int success = 1;
uint32_t word = 0;
PrintAndLog("Addr | data | ascii");
PrintAndLog("-----+--------+------");
for (; addr < 16; addr++) {
if (addr == 2) {
if (usePwd) {
PrintAndLog(" %02u | %08X", addr, pwd, word );
} else {
PrintAndLog(" 02 | cannot read");
}
} else {
success &= EM4x05ReadWord_ext(addr, pwd, usePwd, &word);
}
}
return success;
}
int CmdEM4x05Read(const char *Cmd) {
uint8_t addr;
uint32_t pwd;
bool usePwd = false;
uint8_t ctmp = param_getchar(Cmd, 0);
if ( strlen(Cmd) == 0 || ctmp == 'H' || ctmp == 'h' ) return usage_lf_em4x05_read();
addr = param_get8ex(Cmd, 0, 50, 10);
pwd = param_get32ex(Cmd, 1, 1, 16);
if (addr > 15) {
PrintAndLog("Address must be between 0 and 15");
return 1;
}
if ( pwd == 1 ) {
PrintAndLog("Reading address %02u", addr);
} else {
usePwd = true;
PrintAndLog("Reading address %02u | password %08X", addr, pwd);
}
uint32_t word = 0;
int isOk = EM4x05ReadWord_ext(addr, pwd, usePwd, &word);
if (isOk)
PrintAndLog("Address %02d | %08X - %s", addr, word, (addr > 13) ? "Lock" : "");
else
PrintAndLog("Read Address %02d | failed",addr);
return isOk;
}
int CmdEM4x05Write(const char *Cmd) {
uint8_t ctmp = param_getchar(Cmd, 0);
if ( strlen(Cmd) == 0 || ctmp == 'H' || ctmp == 'h' ) return usage_lf_em4x05_write();
bool usePwd = false;
uint8_t addr = 50; // default to invalid address
uint32_t data = 0; // default to blank data
uint32_t pwd = 1; // default to blank password
addr = param_get8ex(Cmd, 0, 50, 10);
data = param_get32ex(Cmd, 1, 0, 16);
pwd = param_get32ex(Cmd, 2, 1, 16);
if ( addr > 15 ) {
PrintAndLog("Address must be between 0 and 15");
return 1;
}
if ( pwd == 1 )
PrintAndLog("Writing address %d data %08X", addr, data);
else {
usePwd = true;
PrintAndLog("Writing address %d data %08X using password %08X", addr, data, pwd);
}
uint16_t flag = (addr << 8 ) | usePwd;
UsbCommand c = {CMD_EM4X_WRITE_WORD, {flag, data, pwd}};
clearCommandBuffer();
SendCommand(&c);
UsbCommand resp;
if (!WaitForResponseTimeout(CMD_ACK, &resp, 2000)){
PrintAndLog("Error occurred, device did not respond during write operation.");
return -1;
}
if (!downloadSamplesEM())
return -1;
//need 0 bits demoded (after preamble) to verify write cmd
uint32_t dummy = 0;
int isOk = demodEM4x05resp(&dummy);
if (isOk)
PrintAndLog("Write Verified");
else
PrintAndLog("Write could not be verified");
return isOk;
}
void printEM4x05config(uint32_t wordData) {
uint16_t datarate = (((wordData & 0x3F)+1)*2);
uint8_t encoder = ((wordData >> 6) & 0xF);
char enc[14];
memset(enc,0,sizeof(enc));
uint8_t PSKcf = (wordData >> 10) & 0x3;
char cf[10];
memset(cf,0,sizeof(cf));
uint8_t delay = (wordData >> 12) & 0x3;
char cdelay[33];
memset(cdelay,0,sizeof(cdelay));
uint8_t numblks = EM4x05_GET_NUM_BLOCKS(wordData);
uint8_t LWR = numblks+5-1; //last word read
switch (encoder) {
case 0: snprintf(enc,sizeof(enc),"NRZ"); break;
case 1: snprintf(enc,sizeof(enc),"Manchester"); break;
case 2: snprintf(enc,sizeof(enc),"Biphase"); break;
case 3: snprintf(enc,sizeof(enc),"Miller"); break;
case 4: snprintf(enc,sizeof(enc),"PSK1"); break;
case 5: snprintf(enc,sizeof(enc),"PSK2"); break;
case 6: snprintf(enc,sizeof(enc),"PSK3"); break;
case 7: snprintf(enc,sizeof(enc),"Unknown"); break;
case 8: snprintf(enc,sizeof(enc),"FSK1"); break;
case 9: snprintf(enc,sizeof(enc),"FSK2"); break;
default: snprintf(enc,sizeof(enc),"Unknown"); break;
}
switch (PSKcf) {
case 0: snprintf(cf,sizeof(cf),"RF/2"); break;
case 1: snprintf(cf,sizeof(cf),"RF/8"); break;
case 2: snprintf(cf,sizeof(cf),"RF/4"); break;
case 3: snprintf(cf,sizeof(cf),"unknown"); break;
}
switch (delay) {
case 0: snprintf(cdelay, sizeof(cdelay),"no delay"); break;
case 1: snprintf(cdelay, sizeof(cdelay),"BP/8 or 1/8th bit period delay"); break;
case 2: snprintf(cdelay, sizeof(cdelay),"BP/4 or 1/4th bit period delay"); break;
case 3: snprintf(cdelay, sizeof(cdelay),"no delay"); break;
}
uint8_t readLogin = (wordData & EM4x05_READ_LOGIN_REQ)>>18;
uint8_t readHKL = (wordData & EM4x05_READ_HK_LOGIN_REQ)>>19;
uint8_t writeLogin = (wordData & EM4x05_WRITE_LOGIN_REQ)>>20;
uint8_t writeHKL = (wordData & EM4x05_WRITE_HK_LOGIN_REQ)>>21;
uint8_t raw = (wordData & EM4x05_READ_AFTER_WRITE)>>22;
uint8_t disable = (wordData & EM4x05_DISABLE_ALLOWED)>>23;
uint8_t rtf = (wordData & EM4x05_READER_TALK_FIRST)>>24;
uint8_t pigeon = (wordData & (1<<26))>>26;
PrintAndLog("ConfigWord: %08X (Word 4)\n", wordData);
PrintAndLog("Config Breakdown:");
PrintAndLog(" Data Rate: %02u | RF/%u", wordData & 0x3F, datarate);
PrintAndLog(" Encoder: %u | %s", encoder, enc);
PrintAndLog(" PSK CF: %u | %s", PSKcf, cf);
PrintAndLog(" Delay: %u | %s", delay, cdelay);
PrintAndLog(" LastWordR: %02u | Address of last word for default read - meaning %u blocks are output", LWR, numblks);
PrintAndLog(" ReadLogin: %u | Read Login is %s", readLogin, readLogin ? "Required" : "Not Required");
PrintAndLog(" ReadHKL: %u | Read Housekeeping Words Login is %s", readHKL, readHKL ? "Required" : "Not Required");
PrintAndLog("WriteLogin: %u | Write Login is %s", writeLogin, writeLogin ? "Required" : "Not Required");
PrintAndLog(" WriteHKL: %u | Write Housekeeping Words Login is %s", writeHKL, writeHKL ? "Required" : "Not Required");
PrintAndLog(" R.A.W.: %u | Read After Write is %s", raw, raw ? "On" : "Off");
PrintAndLog(" Disable: %u | Disable Command is %s", disable, disable ? "Accepted" : "Not Accepted");
PrintAndLog(" R.T.F.: %u | Reader Talk First is %s", rtf, rtf ? "Enabled" : "Disabled");
PrintAndLog(" Pigeon: %u | Pigeon Mode is %s\n", pigeon, pigeon ? "Enabled" : "Disabled");
}
void printEM4x05info(uint32_t block0, uint32_t serial) {
uint8_t chipType = (block0 >> 1) & 0xF;
uint8_t cap = (block0 >> 5) & 3;
uint16_t custCode = (block0 >> 9) & 0x3FF;
switch (chipType) {
case 9: PrintAndLog("\n Chip Type: %u | EM4305", chipType); break;
case 8: PrintAndLog("\n Chip Type: %u | EM4205", chipType); break;
case 4: PrintAndLog(" Chip Type: %u | Unknown", chipType); break;
case 2: PrintAndLog(" Chip Type: %u | EM4469", chipType); break;
//add more here when known
default: PrintAndLog(" Chip Type: %u Unknown", chipType); break;
}
switch (cap) {
case 3: PrintAndLog(" Cap Type: %u | 330pF",cap); break;
case 2: PrintAndLog(" Cap Type: %u | %spF",cap, (chipType==2)? "75":"210"); break;
case 1: PrintAndLog(" Cap Type: %u | 250pF",cap); break;
case 0: PrintAndLog(" Cap Type: %u | no resonant capacitor",cap); break;
default: PrintAndLog(" Cap Type: %u | unknown",cap); break;
}
PrintAndLog(" Cust Code: %03u | %s", custCode, (custCode == 0x200) ? "Default": "Unknown");
if (serial != 0)
PrintAndLog("\n Serial #: %08X\n", serial);
}
void printEM4x05ProtectionBits(uint32_t word) {
for (uint8_t i = 0; i < 15; i++) {
PrintAndLog(" Word: %02u | %s", i, (((1 << i) & word ) || i < 2) ? "Is Write Locked" : "Is Not Write Locked");
if (i==14)
PrintAndLog(" Word: %02u | %s", i+1, (((1 << i) & word ) || i < 2) ? "Is Write Locked" : "Is Not Write Locked");
}
}
//quick test for EM4x05/EM4x69 tag
bool EM4x05IsBlock0(uint32_t *word) {
return EM4x05ReadWord_ext(0, 0, false, word);
}
int CmdEM4x05Info(const char *Cmd) {
#define EM_SERIAL_BLOCK 1
#define EM_CONFIG_BLOCK 4
#define EM_PROT1_BLOCK 14
#define EM_PROT2_BLOCK 15
uint32_t pwd;
uint32_t word = 0, block0 = 0, serial = 0;
bool usePwd = false;
uint8_t ctmp = param_getchar(Cmd, 0);
if ( ctmp == 'H' || ctmp == 'h' ) return usage_lf_em4x05_info();
// for now use default input of 1 as invalid (unlikely 1 will be a valid password...)
pwd = param_get32ex(Cmd, 0, 1, 16);
if ( pwd != 1 )
usePwd = true;
// read word 0 (chip info)
// block 0 can be read even without a password.
if ( !EM4x05IsBlock0(&block0) )
return -1;
// read word 1 (serial #) doesn't need pwd
// continue if failed, .. non blocking fail.
EM4x05ReadWord_ext(EM_SERIAL_BLOCK, 0, false, &serial);
printEM4x05info(block0, serial);
// read word 4 (config block)
// needs password if one is set
if ( EM4x05ReadWord_ext(EM_CONFIG_BLOCK, pwd, usePwd, &word) != 1 )
return 0;
printEM4x05config(word);
// read word 14 and 15 to see which is being used for the protection bits
if ( EM4x05ReadWord_ext(EM_PROT1_BLOCK, pwd, usePwd, &word) != 1 ) {
return 0;
}
// if status bit says this is not the used protection word
if (!(word & 0x8000)) {
if ( EM4x05ReadWord_ext(EM_PROT2_BLOCK, pwd, usePwd, &word) != 1 )
return 0;
}
//something went wrong
if (!(word & 0x8000)) return 0;
printEM4x05ProtectionBits(word);
return 1;
}
static command_t CommandTable[] = {
{"help", CmdHelp, 1, "This help"},
//{"410x_demod", CmdEMdemodASK, 0, "Extract ID from EM410x tag on antenna)"},
{"410x_demod", CmdEM410xDemod, 0, "demodulate a EM410x tag from the GraphBuffer"},
{"410x_read", CmdEM410xRead, 1, "attempt to read and extract tag data"},
{"410x_sim", CmdEM410xSim, 0, "simulate EM410x tag"},
{"410x_brute", CmdEM410xBrute, 0, "reader bruteforce attack by simulating EM410x tags"},
{"410x_watch", CmdEM410xWatch, 0, "watches for EM410x 125/134 kHz tags (option 'h' for 134)"},
{"410x_spoof", CmdEM410xWatchnSpoof, 0, "watches for EM410x 125/134 kHz tags, and replays them. (option 'h' for 134)" },
{"410x_write", CmdEM410xWrite, 0, "write EM410x UID to T5555(Q5) or T55x7 tag"},
{"4x05_dump", CmdEM4x05Dump, 0, "dump EM4x05/EM4x69 tag"},
{"4x05_info", CmdEM4x05Info, 0, "tag information EM4x05/EM4x69"},
{"4x05_read", CmdEM4x05Read, 0, "read word data from EM4x05/EM4x69"},
{"4x05_write", CmdEM4x05Write, 0, "write word data to EM4x05/EM4x69"},
{"4x50_dump", CmdEM4x50Dump, 0, "dump EM4x50 tag"},
{"4x50_read", CmdEM4x50Read, 0, "read word data from EM4x50"},
{"4x50_write", CmdEM4x50Write, 0, "write word data to EM4x50"},
{NULL, NULL, 0, NULL}
};
int CmdLFEM4X(const char *Cmd) {
clearCommandBuffer();
CmdsParse(CommandTable, Cmd);
return 0;
}
int CmdHelp(const char *Cmd) {
CmdsHelp(CommandTable);
return 0;
}