#ifndef PROTOCOLS_H #define PROTOCOLS_H //The following data is taken from http://www.proxmark.org/forum/viewtopic.php?pid=13501#p13501 /* ISO14443A (usually NFC tags) 26 (7bits) = REQA 30 = Read (usage: 30+1byte block number+2bytes ISO14443A-CRC - answer: 16bytes) A2 = Write (usage: A2+1byte block number+4bytes data+2bytes ISO14443A-CRC - answer: 0A [ACK] or 00 [NAK]) 52 (7bits) = WUPA (usage: 52(7bits) - answer: 2bytes ATQA) 93 20 = Anticollision (usage: 9320 - answer: 4bytes UID+1byte UID-bytes-xor) 93 70 = Select (usage: 9370+5bytes 9320 answer - answer: 1byte SAK) 95 20 = Anticollision of cascade level2 95 70 = Select of cascade level2 50 00 = Halt (usage: 5000+2bytes ISO14443A-CRC - no answer from card) Mifare 60 = Authenticate with KeyA 61 = Authenticate with KeyB 40 (7bits) = Used to put Chinese Changeable UID cards in special mode (must be followed by 43 (8bits) - answer: 0A) C0 = Decrement C1 = Increment C2 = Restore B0 = Transfer Ultralight C A0 = Compatibility Write (to accomodate MIFARE commands) 1A = Step1 Authenticate AF = Step2 Authenticate ISO14443B 05 = REQB 1D = ATTRIB 50 = HALT BA = PING (reader -> tag) AB = PONG (tag -> reader) SRIX4K (tag does not respond to 05) 06 00 = INITIATE 0E xx = SELECT ID (xx = Chip-ID) 0B = Get UID 08 yy = Read Block (yy = block number) 09 yy dd dd dd dd = Write Block (yy = block number; dd dd dd dd = data to be written) 0C = Reset to Inventory 0F = Completion 0A 11 22 33 44 55 66 = Authenticate (11 22 33 44 55 66 = data to authenticate) ISO15693 MANDATORY COMMANDS (all ISO15693 tags must support those) 01 = Inventory (usage: 260100+2bytes ISO15693-CRC - answer: 12bytes) 02 = Stay Quiet OPTIONAL COMMANDS (not all tags support them) 20 = Read Block (usage: 0220+1byte block number+2bytes ISO15693-CRC - answer: 4bytes) 21 = Write Block (usage: 0221+1byte block number+4bytes data+2bytes ISO15693-CRC - answer: 4bytes) 22 = Lock Block 23 = Read Multiple Blocks (usage: 0223+1byte 1st block to read+1byte last block to read+2bytes ISO15693-CRC) 25 = Select 26 = Reset to Ready 27 = Write AFI 28 = Lock AFI 29 = Write DSFID 2A = Lock DSFID 2B = Get_System_Info (usage: 022B+2bytes ISO15693-CRC - answer: 14 or more bytes) 2C = Read Multiple Block Security Status (usage: 022C+1byte 1st block security to read+1byte last block security to read+2bytes ISO15693-CRC) EM Microelectronic CUSTOM COMMANDS A5 = Active EAS (followed by 1byte IC Manufacturer code+1byte EAS type) A7 = Write EAS ID (followed by 1byte IC Manufacturer code+2bytes EAS value) B8 = Get Protection Status for a specific block (followed by 1byte IC Manufacturer code+1byte block number+1byte of how many blocks after the previous is needed the info) E4 = Login (followed by 1byte IC Manufacturer code+4bytes password) NXP/Philips CUSTOM COMMANDS A0 = Inventory Read A1 = Fast Inventory Read A2 = Set EAS A3 = Reset EAS A4 = Lock EAS A5 = EAS Alarm A6 = Password Protect EAS A7 = Write EAS ID A8 = Read EPC B0 = Inventory Page Read B1 = Fast Inventory Page Read B2 = Get Random Number B3 = Set Password B4 = Write Password B5 = Lock Password B6 = Bit Password Protection B7 = Lock Page Protection Condition B8 = Get Multiple Block Protection Status B9 = Destroy SLI BA = Enable Privacy BB = 64bit Password Protection 40 = Long Range CMD (Standard ISO/TR7003:1990) ISO 7816-4 Basic interindustry commands. For command APDU's. B0 = READ BINARY D0 = WRITE BINARY D6 = UPDATE BINARY 0E = ERASE BINARY B2 = READ RECORDS D2 = WRITE RECORDS E2 = APPEND RECORD DC = UPDATE RECORD CA = GET DATA DA = PUT DATA A4 = SELECT FILE 20 = VERIFY 88 = INTERNAL AUTHENTICATION 82 = EXTERNAL AUTHENTICATION B4 = GET CHALLENGE 70 = MANAGE CHANNEL For response APDU's 90 00 = OK 6x xx = ERROR */ #define ICLASS_CMD_ACTALL 0x0A #define ICLASS_CMD_READ_OR_IDENTIFY 0x0C #define ICLASS_CMD_SELECT 0x81 #define ICLASS_CMD_PAGESEL 0x84 #define ICLASS_CMD_READCHECK_KD 0x88 #define ICLASS_CMD_READCHECK_KC 0x18 #define ICLASS_CMD_CHECK 0x05 #define ICLASS_CMD_DETECT 0x0F #define ICLASS_CMD_HALT 0x00 #define ICLASS_CMD_UPDATE 0x87 #define ICLASS_CMD_ACT 0x8E #define ICLASS_CMD_READ4 0x06 #define ISO14443A_CMD_REQA 0x26 #define ISO14443A_CMD_READBLOCK 0x30 #define ISO14443A_CMD_WUPA 0x52 #define ISO14443A_CMD_ANTICOLL_OR_SELECT 0x93 #define ISO14443A_CMD_ANTICOLL_OR_SELECT_2 0x95 #define ISO14443A_CMD_WRITEBLOCK 0xA0 #define ISO14443A_CMD_HALT 0x50 #define ISO14443A_CMD_RATS 0xE0 #define MIFARE_AUTH_KEYA 0x60 #define MIFARE_AUTH_KEYB 0x61 #define MIFARE_MAGICWUPC1 0x40 #define MIFARE_MAGICWUPC2 0x43 #define MIFARE_MAGICWIPEC 0x41 #define MIFARE_CMD_INC 0xC0 #define MIFARE_CMD_DEC 0xC1 #define MIFARE_CMD_RESTORE 0xC2 #define MIFARE_CMD_TRANSFER 0xB0 #define MIFARE_EV1_PERSONAL_UID 0x40 #define MIFARE_EV1_SETMODE 0x43 #define MIFARE_ULC_WRITE 0xA2 //#define MIFARE_ULC__COMP_WRITE 0xA0 #define MIFARE_ULC_AUTH_1 0x1A #define MIFARE_ULC_AUTH_2 0xAF #define MIFARE_ULEV1_AUTH 0x1B #define MIFARE_ULEV1_VERSION 0x60 #define MIFARE_ULEV1_FASTREAD 0x3A #define MIFARE_ULEV1_READ_CNT 0x39 #define MIFARE_ULEV1_INCR_CNT 0xA5 #define MIFARE_ULEV1_READSIG 0x3C #define MIFARE_ULEV1_CHECKTEAR 0x3E #define MIFARE_ULEV1_VCSL 0x4B /** 06 00 = INITIATE 0E xx = SELECT ID (xx = Chip-ID) 0B = Get UID 08 yy = Read Block (yy = block number) 09 yy dd dd dd dd = Write Block (yy = block number; dd dd dd dd = data to be written) 0C = Reset to Inventory 0F = Completion 0A 11 22 33 44 55 66 = Authenticate (11 22 33 44 55 66 = data to authenticate) **/ #define ISO14443B_REQB 0x05 #define ISO14443B_ATTRIB 0x1D #define ISO14443B_HALT 0x50 #define ISO14443B_INITIATE 0x06 #define ISO14443B_SELECT 0x0E #define ISO14443B_GET_UID 0x0B #define ISO14443B_READ_BLK 0x08 #define ISO14443B_WRITE_BLK 0x09 #define ISO14443B_RESET 0x0C #define ISO14443B_COMPLETION 0x0F #define ISO14443B_AUTHENTICATE 0x0A #define ISO14443B_PING 0xBA #define ISO14443B_PONG 0xAB //First byte is 26 #define ISO15693_INVENTORY 0x01 #define ISO15693_STAYQUIET 0x02 //First byte is 02 #define ISO15693_READBLOCK 0x20 #define ISO15693_WRITEBLOCK 0x21 #define ISO15693_LOCKBLOCK 0x22 #define ISO15693_READ_MULTI_BLOCK 0x23 #define ISO15693_SELECT 0x25 #define ISO15693_RESET_TO_READY 0x26 #define ISO15693_WRITE_AFI 0x27 #define ISO15693_LOCK_AFI 0x28 #define ISO15693_WRITE_DSFID 0x29 #define ISO15693_LOCK_DSFID 0x2A #define ISO15693_GET_SYSTEM_INFO 0x2B #define ISO15693_READ_MULTI_SECSTATUS 0x2C // Topaz command set: #define TOPAZ_REQA 0x26 // Request #define TOPAZ_WUPA 0x52 // WakeUp #define TOPAZ_RID 0x78 // Read ID #define TOPAZ_RALL 0x00 // Read All (all bytes) #define TOPAZ_READ 0x01 // Read (a single byte) #define TOPAZ_WRITE_E 0x53 // Write-with-erase (a single byte) #define TOPAZ_WRITE_NE 0x1a // Write-no-erase (a single byte) // additional commands for Dynamic Memory Model #define TOPAZ_RSEG 0x10 // Read segment #define TOPAZ_READ8 0x02 // Read (eight bytes) #define TOPAZ_WRITE_E8 0x54 // Write-with-erase (eight bytes) #define TOPAZ_WRITE_NE8 0x1B // Write-no-erase (eight bytes) #define ISO_14443A 0 #define ICLASS 1 #define ISO_14443B 2 #define TOPAZ 3 #define ISO_7816_4 4 //-- Picopass fuses #define FUSE_FPERS 0x80 #define FUSE_CODING1 0x40 #define FUSE_CODING0 0x20 #define FUSE_CRYPT1 0x10 #define FUSE_CRYPT0 0x08 #define FUSE_FPROD1 0x04 #define FUSE_FPROD0 0x02 #define FUSE_RA 0x01 // ISO 7816-4 Basic interindustry commands. For command APDU's. #define ISO7816_READ_BINARY 0xB0 #define ISO7816_WRITE_BINARY 0xD0 #define ISO7816_UPDATE_BINARY 0xD6 #define ISO7816_ERASE_BINARY 0x0E #define ISO7816_READ_RECORDS 0xB2 #define ISO7816_WRITE_RECORDS 0xD2 #define ISO7816_APPEND_RECORD 0xE2 #define ISO7816_UPDATE_RECORD 0xDC #define ISO7816_GET_DATA 0xCA #define ISO7816_PUT_DATA 0xDA #define ISO7816_SELECT_FILE 0xA4 #define ISO7816_VERIFY 0x20 #define ISO7816_INTERNAL_AUTHENTICATION 0x88 #define ISO7816_EXTERNAL_AUTHENTICATION 0x82 #define ISO7816_GET_CHALLENGE 0xB4 #define ISO7816_MANAGE_CHANNEL 0x70 // ISO7816-4 For response APDU's #define ISO7816_OK 0x9000 // 6x xx = ERROR void printIclassDumpInfo(uint8_t* iclass_dump); void getMemConfig(uint8_t mem_cfg, uint8_t chip_cfg, uint8_t *max_blk, uint8_t *app_areas, uint8_t *kb); #endif // PROTOCOLS_H