//----------------------------------------------------------------------------- // Jonathan Westhues, Mar 2006 // Edits by Gerhard de Koning Gans, Sep 2007 // // This code is licensed to you under the terms of the GNU GPL, version 2 or, // at your option, any later version. See the LICENSE.txt file for the text of // the license. //----------------------------------------------------------------------------- // Definitions for all the types of commands that may be sent over USB; our // own protocol. //----------------------------------------------------------------------------- #ifndef __USB_CMD_H #define __USB_CMD_H #ifdef _MSC_VER typedef DWORD uint32_t; typedef BYTE uint8_t; #define PACKED // stuff #else #include #include #define PACKED __attribute__((packed)) #endif #define USB_CMD_DATA_SIZE 512 typedef struct { uint64_t cmd; uint64_t arg[3]; union { uint8_t asBytes[USB_CMD_DATA_SIZE]; uint32_t asDwords[USB_CMD_DATA_SIZE/4]; } d; } PACKED UsbCommand; // For the bootloader #define CMD_DEVICE_INFO 0x0000 #define CMD_SETUP_WRITE 0x0001 #define CMD_FINISH_WRITE 0x0003 #define CMD_HARDWARE_RESET 0x0004 #define CMD_START_FLASH 0x0005 #define CMD_NACK 0x00fe #define CMD_ACK 0x00ff // For general mucking around #define CMD_DEBUG_PRINT_STRING 0x0100 #define CMD_DEBUG_PRINT_INTEGERS 0x0101 #define CMD_DEBUG_PRINT_BYTES 0x0102 #define CMD_LCD_RESET 0x0103 #define CMD_LCD 0x0104 #define CMD_BUFF_CLEAR 0x0105 #define CMD_READ_MEM 0x0106 #define CMD_VERSION 0x0107 // For low-frequency tags #define CMD_READ_TI_TYPE 0x0202 #define CMD_WRITE_TI_TYPE 0x0203 #define CMD_DOWNLOADED_RAW_BITS_TI_TYPE 0x0204 #define CMD_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0205 #define CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0206 #define CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K 0x0207 #define CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K 0x0208 #define CMD_DOWNLOADED_SIM_SAMPLES_125K 0x0209 #define CMD_SIMULATE_TAG_125K 0x020A #define CMD_HID_DEMOD_FSK 0x020B #define CMD_HID_SIM_TAG 0x020C #define CMD_SET_LF_DIVISOR 0x020D #define CMD_LF_SIMULATE_BIDIR 0x020E #define CMD_SET_ADC_MUX 0x020F #define CMD_HID_CLONE_TAG 0x0210 #define CMD_EM410X_WRITE_TAG 0x0211 #define CMD_INDALA_CLONE_TAG 0x0212 // for 224 bits UID #define CMD_INDALA_CLONE_TAG_L 0x0213 #define CMD_T55XX_READ_BLOCK 0x0214 #define CMD_T55XX_WRITE_BLOCK 0x0215 #define CMD_T55XX_READ_TRACE 0x0216 #define CMD_PCF7931_READ 0x0217 #define CMD_EM4X_READ_WORD 0x0218 #define CMD_EM4X_WRITE_WORD 0x0219 /* CMD_SET_ADC_MUX: ext1 is 0 for lopkd, 1 for loraw, 2 for hipkd, 3 for hiraw */ // For the 13.56 MHz tags #define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693 0x0300 #define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_14443 0x0301 #define CMD_READ_SRI512_TAG 0x0303 #define CMD_READ_SRIX4K_TAG 0x0304 #define CMD_READER_ISO_15693 0x0310 #define CMD_SIMTAG_ISO_15693 0x0311 #define CMD_RECORD_RAW_ADC_SAMPLES_ISO_15693 0x0312 #define CMD_ISO_15693_COMMAND 0x0313 #define CMD_ISO_15693_COMMAND_DONE 0x0314 #define CMD_ISO_15693_FIND_AFI 0x0315 #define CMD_ISO_15693_DEBUG 0x0316 // For Hitag2 transponders #define CMD_SNOOP_HITAG 0x0370 #define CMD_SIMULATE_HITAG 0x0371 #define CMD_READER_HITAG 0x0372 #define CMD_SIMULATE_TAG_HF_LISTEN 0x0380 #define CMD_SIMULATE_TAG_ISO_14443 0x0381 #define CMD_SNOOP_ISO_14443 0x0382 #define CMD_SNOOP_ISO_14443a 0x0383 #define CMD_SIMULATE_TAG_ISO_14443a 0x0384 #define CMD_READER_ISO_14443a 0x0385 #define CMD_SIMULATE_TAG_LEGIC_RF 0x0387 #define CMD_READER_LEGIC_RF 0x0388 #define CMD_WRITER_LEGIC_RF 0x0389 #define CMD_EPA_PACE_COLLECT_NONCE 0x038A #define CMD_SNOOP_ICLASS 0x0392 #define CMD_SIMULATE_TAG_ICLASS 0x0393 #define CMD_READER_ICLASS 0x0394 // For measurements of the antenna tuning #define CMD_MEASURE_ANTENNA_TUNING 0x0400 #define CMD_MEASURE_ANTENNA_TUNING_HF 0x0401 #define CMD_MEASURED_ANTENNA_TUNING 0x0410 #define CMD_LISTEN_READER_FIELD 0x0420 // For direct FPGA control #define CMD_FPGA_MAJOR_MODE_OFF 0x0500 // For mifare commands #define CMD_MIFARE_SET_DBGMODE 0x0600 #define CMD_MIFARE_EML_MEMCLR 0x0601 #define CMD_MIFARE_EML_MEMSET 0x0602 #define CMD_MIFARE_EML_MEMGET 0x0603 #define CMD_MIFARE_EML_CARDLOAD 0x0604 #define CMD_MIFARE_EML_CSETBLOCK 0x0605 #define CMD_MIFARE_EML_CGETBLOCK 0x0606 #define CMD_SIMULATE_MIFARE_CARD 0x0610 #define CMD_READER_MIFARE 0x0611 #define CMD_MIFARE_NESTED 0x0612 #define CMD_MIFARE_READBL 0x0620 #define CMD_MIFARE_READSC 0x0621 #define CMD_MIFARE_WRITEBL 0x0622 #define CMD_MIFARE_CHKKEYS 0x0623 #define CMD_MIFARE_SNIFFER 0x0630 #define CMD_UNKNOWN 0xFFFF // CMD_DEVICE_INFO response packet has flags in arg[0], flag definitions: /* Whether a bootloader that understands the common_area is present */ #define DEVICE_INFO_FLAG_BOOTROM_PRESENT (1<<0) /* Whether a osimage that understands the common_area is present */ #define DEVICE_INFO_FLAG_OSIMAGE_PRESENT (1<<1) /* Set if the bootloader is currently executing */ #define DEVICE_INFO_FLAG_CURRENT_MODE_BOOTROM (1<<2) /* Set if the OS is currently executing */ #define DEVICE_INFO_FLAG_CURRENT_MODE_OS (1<<3) /* Set if this device understands the extend start flash command */ #define DEVICE_INFO_FLAG_UNDERSTANDS_START_FLASH (1<<4) /* CMD_START_FLASH may have three arguments: start of area to flash, end of area to flash, optional magic. The bootrom will not allow to overwrite itself unless this magic is given as third parameter */ #define START_FLASH_MAGIC 0x54494f44 // 'DOIT' #endif