local utils = require('utils')
local cmds = require('commands')
local getopt = require('getopt')
local ansicolors  = require('ansicolors')

--[[
  script to create a clone-dump with new crc
  Author: mosci
    my Fork: https://github.com/icsom/proxmark3.git

    1. read tag-dump, xor byte 22..end with byte 0x05 of the inputfile
    2. write to outfile
    3. set byte 0x05 to newcrc
    4. until byte 0x21 plain like in inputfile
    5. from 0x22..end xored with newcrc
    6. calculate new crc on each segment (needs to know the new MCD & MSN0..2)

  simplest usage:
    Dump a legic tag with 'hf legic dump'
    place your 'empty' tag on the reader and run
        'script run hf_legic_clone -i orig.bin -w'

    you will see some output like:

        read 1024 bytes from orig.bin

        place your empty tag onto the PM3 to read and display the MCD & MSN0..2
        the values will be shown below
         confirm when ready [y/n] ?y

        0b ad c0 de  <- !! here you'll see the MCD & MSN of your empty tag, which has to be typed in manually as seen below !!
        type in  MCD as 2-digit value - e.g.: 00 (default: 79 )
         > 0b
        type in MSN0 as 2-digit value - e.g.: 01 (default: 28 )
         > ad
        type in MSN1 as 2-digit value - e.g.: 02 (default: d1 )
         > c0
        type in MSN2 as 2-digit value - e.g.: 03 (default: 43 )
         > de
        MCD:0b, MSN:ad c0 de, MCC:79 <- this crc is calculated from the MCD & MSN and must match the one on yout empty tag

        wrote 1024 bytes to myLegicClone.hex
        enter number of bytes to write? (default: 86 )

        loaded 1024 samples
        #db# setting up legic card
        #db# MIM 256 card found, writing 0x00 - 0x01 ...
        #db# write successful
        ...
        #db# setting up legic card
        #db# MIM 256 card found, writing 0x56 - 0x01 ...
        #db# write successful
        proxmark3>

    the default value (number of bytes to write) is calculated over all valid segments and should be ok - just hit enter, wait until write has finished
    and your clone should be ready (except there has to be a additional KGH-CRC to be calculated - which credentials are unknown until yet)

    the '-w' switch will only work with my fork - it needs the binary legic_crc8 which is not part of the proxmark3-master-branch
    also the ability to write DCF is not possible with the proxmark3-master-branch
    but creating dumpfile-clone files will be possible (without valid segment-crc - this has to done manually with)


    (example)   Legic-Prime Layout with 'Kaba Group Header'
      +----+----+----+----+----+----+----+----+
  0x00|MCD |MSN0|MSN1|MSN2|MCC | 60 | ea | 9f |
      +----+----+----+----+----+----+----+----+
  0x08| ff | 00 | 00 | 00 | 11 |Bck0|Bck1|Bck2|
      +----+----+----+----+----+----+----+----+
  0x10|Bck3|Bck4|Bck5|BCC | 00 | 00 |Seg0|Seg1|
      +----+----+----+----+----+----+----+----+
  0x18|Seg2|Seg3|SegC|Stp0|Stp1|Stp2|Stp3|UID0|
      +----+----+----+----+----+----+----+----+
  0x20|UID1|UID2|kghC|
      +----+----+----+

        MCD=     ManufacturerID           (1 Byte)
        MSN0..2= ManufactureSerialNumber  (3 Byte)
        MCC=     CRC                      (1 Byte) calculated over MCD,MSN0..2
        DCF=     DecrementalField         (2 Byte) 'credential' (enduser-Tag) seems to have always DCF-low=0x60 DCF-high=0xea
        Bck0..5= Backup                   (6 Byte) Bck0 'dirty-flag', Bck1..5 SegmentHeader-Backup
        BCC=     BackupCRC                (1 Byte) CRC calculated over Bck1..5
        Seg0..3= SegmentHeader            (on MIM 4 Byte )
        SegC=    SegmentCRC               (1 Byte) calculated over MCD,MSN0..2,Seg0..3
        Stp0..n= Stamp0...                (variable length) length = Segment-Len - UserData - 1
        UID0..n= UserDater                (variable length - with KGH hex 0x00-0x63 / dec 0-99) length = Segment-Len - WRP - WRC - 1
        kghC=    KabaGroupHeader          (1 Byte + addr 0x0c must be 0x11)
    as seen on this example: addr 0x05..0x08 & 0x0c must have been set to this values - otherwise kghCRC will not be created by a official reader (not accepted)
--]]

copyright = ''
author = 'Mosci'
version = 'v1.0.2'
desc = [[
This is a script which creates a clone-dump of a dump from a LEGIC Prime Tag (MIM256 or MIM1024)
Create a dump by running `hf legic dump`.
]]
example = [[
    script run hf_legic_clone -i my_dump.bin -o my_clone.bin -c f8
    script run hf_legic_clone -i my_dump.bin -d -s
]]
usage = [[
script run hf_legic_clone [-h] [-i <file>] [-o <file>] [-c <crc>] [-d] [-s] [-w]
]]
arguments = [[
required :
    -i <input file>     - file to read data from, must be in binary format (*.bin)

optional :
    -h                  - Help text
    -o <output file>    - requires option -c to be given
    -c <new-tag crc>    - requires option -o to be given
    -d                  - Display content of found Segments
    -s                  - Display summary at the end
    -w                  - write directly to tag - a file hf-legic-UID-dump.bin will also be generated

    e.g.:
    hint: using the CRC '00' will result in a plain dump ( -c 00 )
]]
local DEBUG = true
local bxor = bit32.bxor
---
-- This is only meant to be used when errors occur
local function dbg(args)
    if not DEBUG then return end
    if type(args) == 'table' then
        local i = 1
        while args[i] do
            dbg(args[i])
            i = i+1
        end
    else
        print('###', args)
    end
end
-- we need always 2 digits
local function prepend_zero(s)
    if s == nil then return '..' end

    if (#s == 1) then
        return '0' .. s
    else
        if (#s == 0) then
            return '00'
        else
            return s
        end
    end
end
---
-- This is only meant to be used when errors occur
local function oops(err)
    print('ERROR:', err)
    core.clearCommandBuffer()
    return nil, err
end
---
-- Usage help
local function help()
    print(copyright)
    print(author)
    print(version)
    print(desc)
    print(ansicolors.cyan..'Usage'..ansicolors.reset)
    print(usage)
    print(ansicolors.cyan..'Arguments'..ansicolors.reset)
    print(arguments)
    print(ansicolors.cyan..'Example usage'..ansicolors.reset)
    print(example)
end
-- read LEGIC data
local function readlegicdata(offset, length, iv)
    -- Read data
    local command = Command:newMIX{
                    cmd = cmds.CMD_HF_LEGIC_READER
                    , arg1 = offset
                    , arg2 = length
                    , arg3 = iv
                    , data = nil
                    }
    local result, err = command:sendMIX()
    if not result then return oops(err) end
    -- result is a packed data structure, data starts at offset 33
    return result
end

-- Check availability of file
local function file_check(file_name)
    local exists = io.open(file_name, "r")
    if not exists then
        exists = false
    else
        exists = true
    end
    return exists
end

--- xor-wrapper
-- xor all from addr 0x22 (start counting from 1 => 23)
local function xorme(hex, xor, index)
    if ( index >= 23 ) then
        return ('%02x'):format(bxor( tonumber(hex, 16) , tonumber(xor, 16) ))
    else
        return hex
    end
end

-- read input-file into array
local function getInputBytes(infile)
    local bytes = {}
    local f = io.open(infile, "rb")
    if f == nil then print("OOps ... failed to read from file ".. infile); return false; end

    local str = f:read("*all")
    f:close()

    for c in (str or ''):gmatch'.' do
        bytes[#bytes + 1] = ('%02x'):format(c:byte())
    end

    print("\nread ".. #bytes .." bytes from "..ansicolors.yellow..infile..ansicolors.reset)
    return bytes
end

-- write to file
local function writeOutputBytes(bytes, outfile)
    local fho,err = io.open(outfile, "wb")
    if err then print("OOps ... failed to open output-file ".. outfile); return false; end

    for i = 1, #bytes do
        fho:write(string.char(tonumber(bytes[i], 16)))
    end
    fho:close()
    print("\nwrote ".. #bytes .." bytes to " .. outfile)
    return true
end

-- xore certain bytes
local function xorBytes(inBytes, crc)
    local bytes = {}
    for index = 1, #inBytes do
        bytes[index] = xorme(inBytes[index], crc, index)
    end
    if (#inBytes == #bytes) then
        -- replace crc
        bytes[5] = string.sub(crc, -2)
        return bytes
    else
        print("error: byte-count missmatch")
        return false
    end
end

-- get raw segment-data
local function getSegmentData(bytes, start, index)
    local raw, len, valid, last, wrp, wrc, rd, crc
    local segment = {}
    segment[0] = bytes[start]..' '..bytes[start + 1]..' '..bytes[start + 2]..' '..bytes[start + 3]
    -- flag = high nibble of byte 1
    segment[1] = string.sub(bytes[start + 1], 0, 1)

    -- valid = bit 6 of byte 1
    segment[2] = tonumber(bit32.extract('0x'..bytes[start + 1], 6, 1), 16)

    -- last = bit 7 of byte 1
    segment[3] = tonumber(bit32.extract('0x'..bytes[start + 1], 7, 1), 16)

    -- len = (byte 0)+(bit0-3 of byte 1)
    segment[4] = tonumber(('%03x'):format(tonumber(bit32.extract('0x'..bytes[start + 1], 0, 3), 16)..tonumber(bytes[start], 16)), 16)

    -- wrp (write proteted) = byte 2
    segment[5] = tonumber(bytes[start + 2])

    -- wrc (write control) - bit 4-6 of byte 3
    segment[6] = tonumber(bit32.extract('0x'..bytes[start + 3], 4, 3), 16)

    -- rd (read disabled) - bit 7 of byte 3
    segment[7] = tonumber(bit32.extract('0x'..bytes[start + 3], 7, 1), 16)

    -- crc byte 4
    segment[8] = bytes[start + 4]

    -- segment index
    segment[9] = index

    -- # crc-byte
    segment[10] = start + 4
  return segment
end

--- Kaba Group Header
-- checks if a segment does have a kghCRC
-- returns boolean false if no kgh has being detected or the kghCRC if a kgh was detected
local function CheckKgh(bytes, segStart, segEnd)
    if (bytes[8] == '9f' and bytes[9] == 'ff' and bytes[13] == '11') then
        local i
        local data = {}
        segStart = tonumber(segStart, 10)
        segEnd = tonumber(segEnd, 10)
        local dataLen = segEnd - segStart - 5
        --- gather creadentials for verify
        local WRP = bytes[(segStart + 2)]
        local WRC = ("%02x"):format(tonumber(bit32.extract("0x"..bytes[segStart+3], 4, 3), 16))
        local RD = ("%02x"):format(tonumber(bit32.extract("0x"..bytes[segStart+3], 7, 1), 16))
        local XX = "00"
        cmd = bytes[1]..bytes[2]..bytes[3]..bytes[4]..WRP..WRC..RD..XX
        for i = (segStart + 5), (segStart + 5 + dataLen - 2) do
            cmd = cmd..bytes[i]
        end
        local KGH = ("%02x"):format(utils.Crc8Legic(cmd))
        if (KGH == bytes[segEnd - 1]) then
            return KGH
        else
            return false
        end
    else
        return false
    end
end

-- get only the addresses of segemnt-crc's and the length of bytes
local function getSegmentCrcBytes(bytes)
    local start = 23
    local index = 0
    local crcbytes = {}
    repeat
        seg = getSegmentData(bytes, start, index)
        crcbytes[index] = seg[10]
        start = start + seg[4]
        index = index + 1
    until (seg[3] == 1 or tonumber(seg[9]) == 126 )
    crcbytes[index] = start
    return crcbytes
end

-- print Segment values
local function printSegment(SegmentData)
    res = "\nSegment "..SegmentData[9]..": "
    res = res.. "raw header="..SegmentData[0]..", "
    res = res.. "flag="..SegmentData[1].." (valid="..SegmentData[2].." last="..SegmentData[3].."), "
    res = res.. "len="..("%04d"):format(SegmentData[4])..", "
    res = res.. "WRP="..prepend_zero(SegmentData[5])..", "
    res = res.. "WRC="..prepend_zero(SegmentData[6])..", "
    res = res.. "RD="..SegmentData[7]..", "
    res = res.. "crc="..SegmentData[8]
    print(res)
end

-- print segment-data (hf legic info like)
local function displaySegments(bytes)

    --display segment header(s)
    start = 23
    index = '00'

    --repeat until last-flag ist set to 1 or segment-index has reached 126
    repeat
        wrc = ''
        wrp = ''
        pld = ''
        Seg = getSegmentData(bytes, start, index)
        if Seg == nil then return OOps("segment is nil") end

        KGH = CheckKgh(bytes, start, (start + tonumber(Seg[4], 10)))

        printSegment(Seg)

        -- wrc
        if (Seg[6] > 0) then
            print("WRC protected area:")
            -- length of wrc = wrc
            for i = 1, Seg[6] do
                -- starts at (segment-start + segment-header + segment-crc)-1
                wrc = wrc..bytes[(start + 4 + 1 + i) - 1]..' '
            end
            print(wrc)
        elseif (Seg[5] > 0) then
            print("Remaining write protected area:")
            -- length of wrp = (wrp-wrc)
            for i = 1, (Seg[5] - Seg[6]) do
                -- starts at (segment-start + segment-header + segment-crc + wrc)-1
                wrp = wrp..bytes[(start + 4 + 1 + Seg[6] + i) - 1]..' '
            end
            print(wrp)
        end

        -- payload
        print("Remaining segment payload:")
        --length of payload = segment-len - segment-header - segment-crc - wrp -wrc
        for i = 1, (Seg[4] - 4 - 1 - Seg[5] - Seg[6]) do
            -- starts at (segment-start + segment-header + segment-crc + segment-wrp + segemnt-wrc)-1
            pld = pld..bytes[(start + 4 + 1 + Seg[5] + Seg[6] + i) - 1]..' '
        end
        print(pld)
        if (KGH) then
            print(ansicolors.yellow.."'Kaba Group Header' detected"..ansicolors.reset)
        end
        start = start + Seg[4]
        index = prepend_zero(tonumber(Seg[9]) + 1)

    until (Seg[3] == 1 or tonumber(Seg[9]) == 126 )
end

-- write clone-data to tag
local function writeToTag(plainBytes)
    local SegCrcs = {}
    local output
    local readbytes
    if (utils.confirm("\nplace your empty tag onto the PM3 to restore the data of the input file\nthe CRCs will be calculated as needed\n confirm when ready") == false) then
        return
    end

    readbytes = readlegicdata(0, 4, 0x55)
    -- gather MCD & MSN from new Tag - this must be enterd manually
    print("\nthese are the MCD MSN0 MSN1 MSN2 from the Tag that has being read:")

    -- readbytes is a usbcommandOLD package,  hence 32 bytes offset until data.
    plainBytes[1] = ('%02x'):format(readbytes:byte(33))
    plainBytes[2] = ('%02x'):format(readbytes:byte(34))
    plainBytes[3] = ('%02x'):format(readbytes:byte(35))
    plainBytes[4] = ('%02x'):format(readbytes:byte(36))

    MCD  = plainBytes[1]
    MSN0 = plainBytes[2]
    MSN1 = plainBytes[3]
    MSN2 = plainBytes[4]
    -- calculate crc8 over MCD & MSN
    cmd = MCD..MSN0..MSN1..MSN2
    MCC = ("%02x"):format(utils.Crc8Legic(cmd))
    print("MCD:"..ansicolors.green..MCD..ansicolors.reset..", MSN:"..ansicolors.green..MSN0.." "..MSN1.." "..MSN2..ansicolors.reset..", MCC:"..MCC)

    -- calculate new Segment-CRC for each valid segment
    SegCrcs = getSegmentCrcBytes(plainBytes)
    for i = 0, (#SegCrcs - 1) do
        -- SegCrcs[i]-4 = address of first byte of segmentHeader (low byte segment-length)
        segLen = tonumber(("%1x"):format(tonumber(bit32.extract("0x"..plainBytes[(SegCrcs[i] - 3)], 0, 3), 16))..("%02x"):format(tonumber(plainBytes[SegCrcs[i] - 4], 16)), 16)
        segStart = (SegCrcs[i] - 4)
        segEnd = (SegCrcs[i] - 4 + segLen)
        KGH = CheckKgh(plainBytes, segStart, segEnd)
        if (KGH) then
          print("'Kaba Group Header' detected - re-calculate...")
        end
        cmd = MCD..MSN0..MSN1..MSN2..plainBytes[SegCrcs[i]-4]..plainBytes[SegCrcs[i]-3]..plainBytes[SegCrcs[i]-2]..plainBytes[SegCrcs[i]-1]
        plainBytes[SegCrcs[i]] = ("%02x"):format(utils.Crc8Legic(cmd))
    end

    -- apply MCD & MSN to plain data
    plainBytes[1] = MCD
    plainBytes[2] = MSN0
    plainBytes[3] = MSN1
    plainBytes[4] = MSN2
    plainBytes[5] = MCC

    -- prepare plainBytes for writing (xor plain data with new MCC)
    bytes = xorBytes(plainBytes, MCC)

    -- write data to file
    if (writeOutputBytes(bytes, "hf-legic-UID-dump.bin")) then
        -- write pm3-buffer to Tag
        cmd = ('hf legic restore -f hf-legic-UID-dump')
        core.console(cmd)
    end
end

-- main function
local function main(args)
    -- some variables
    local i = 0
    local oldcrc, newcrc, infile, outfile
    local bytes = {}
    local segments = {}

    -- parse arguments for the script
    for o, a in getopt.getopt(args, 'hwsdc:i:o:') do
        -- output file
        if o == 'o' then
            outfile = a
            ofs = true
            if (file_check(a)) then
                local answer = utils.confirm('\nthe output-file '..a..' already exists!\nthis will delete the previous content!\ncontinue?')
                if (answer == false) then return oops('quiting') end
            end
        end
        -- input file
        if o == 'i' then
            infile = a
            if (file_check(infile) == false) then return oops('input file: '..infile..' not found') end

            bytes = getInputBytes(infile)
            oldcrc = bytes[5]
            ifs = true
            if (bytes == false) then return oops('couldnt read file') end

            i = i + 1
        end
        -- new crc
        if o == 'c' then
            newcrc = a:lower()
            ncs = true
        end
        -- display segments switch
        if o == 'd' then ds = true; end
        -- display summary switch
        if o == 's' then ss = true; end
        -- write to tag switch
        if o == 'w' then ws = true; end
        -- help
        if o == 'h' then return help() end
    end

    if (not ifs) then return oops('option -i <input file> is required') end

    -- bytes to plain
    bytes = xorBytes(bytes, oldcrc)

    -- show segments (works only on plain bytes)
    if (ds) then
        print("+------------------------------------------- Segments -------------------------------------------+")
        displaySegments(bytes);
    end

    if (ofs and ncs) then
        -- xor bytes with new crc
        newBytes = xorBytes(bytes, newcrc)
        -- write output
        if (writeOutputBytes(newBytes, outfile)) then
            -- show summary if requested
            if (ss) then
                -- information
                res = "\n+-------------------------------------------- Summary -------------------------------------------+"
                res = res .."\ncreated clone_dump from\n\t"..infile.." crc: "..oldcrc.."\ndump_file:"
                res = res .."\n\t"..outfile.." crc: "..string.sub(newcrc, -2)
                res = res .."\nyou may load the new file with:"
                res = res ..ansicolors.yellow.."hf legic eload -f "..outfile..ansicolors.reset
                res = res .."\n\nif you don't write to tag immediately ('-w' switch) you will need to recalculate each segmentCRC"
                res = res .."\nafter writing this dump to a tag!"
                res = res .."\n\na segmentCRC gets calculated over MCD,MSN0..3, Segment-Header0..3"
                res = res .."\ne.g. (based on Segment00 of the data from "..infile.."):"
                res = res .."\n"
                res = res ..ansicolors.yellow.."hf legic crc -d "..bytes[1]..bytes[2]..bytes[3]..bytes[4]..bytes[23]..bytes[24]..bytes[25]..bytes[26].." --mcc "..newcrc.." -t 8"..ansicolors.reset
                -- this can not be calculated without knowing the new MCD, MSN0..2
                print(res)
            end
        end
    else
        if (ss) then
            -- show why the output-file was not written
            print("\nnew file not written - some arguments are missing ..")
            print("output file: ".. (ofs and outfile or "not given"))
            print("new crc: ".. (ncs and newcrc or "not given"))
        end
    end
    -- write to tag
    if (ws and ( #bytes == 1024 or #bytes == 256)) then
        writeToTag(bytes)
    end
end

-- call main with arguments
main(args)