//-----------------------------------------------------------------------------
// Copyright (C) 2010 iZsh <izsh at fail0verflow.com>
// Modified 2010-2012 by <adrian -at- atrox.at>
// Modified 2012 by <vsza at vsza.hu>
// Modfified 2018 by <iceman>
//
// This code is licensed to you under the terms of the GNU GPL, version 2 or,
// at your option, any later version. See the LICENSE.txt file for the text of
// the license.
//-----------------------------------------------------------------------------
// High frequency ISO15693 commands
//-----------------------------------------------------------------------------
// There are three basic operation modes, depending on which device (proxmark/pc)
// the signal processing, (de)modulation, transmission protocol and logic is done.
// Mode 1:
// All steps are done on the proxmark, the output of the commands is returned via
// USB-debug-print commands.
// Mode 2:
// The protocol is done on the PC, passing only Iso15693 data frames via USB. This
// allows direct communication with a tag on command level
// Mode 3:
// The proxmark just samples the antenna and passes this "analog" data via USB to
// the client. Signal Processing & decoding is done on the pc. This is the slowest
// variant, but offers the possibility to analyze the waveforms directly.
#include "cmdhf15.h"
#define FrameSOF Iso15693FrameSOF
#define Logic0 Iso15693Logic0
#define Logic1 Iso15693Logic1
#define FrameEOF Iso15693FrameEOF
#define Crc(data, len) crc(CRC_15693, (data), (len))
#define CheckCrc(data, len) check_crc(CRC_15693, (data), (len))
#define AddCrc(data, len) compute_crc(CRC_15693, (data), (len), (data)+(len), (data)+(len)+1)
#define sprintUID(target, uid) Iso15693sprintUID((target), (uid))
// structure and database for uid -> tagtype lookups
typedef struct {
uint64_t uid;
int mask; // how many MSB bits used
char* desc;
} productName;
const productName uidmapping[] = {
// UID, #significant Bits, "Vendor(+Product)"
{ 0xE001000000000000LL, 16, "Motorola UK" },
// E0 02 xx
// 02 = ST Microelectronics
// XX = IC id (Chip ID Family)
{ 0xE002000000000000LL, 16, "ST Microelectronics SA France" },
{ 0xE002050000000000LL, 24, "ST Microelectronics; LRI64 [IC id = 05]"},
{ 0xE002080000000000LL, 24, "ST Microelectronics; LRI2K [IC id = 08]"},
{ 0xE0020A0000000000LL, 24, "ST Microelectronics; LRIS2K [IC id = 10]"},
{ 0xE002440000000000LL, 24, "ST Microelectronics; LRIS64K [IC id = 68]"},
{ 0xE003000000000000LL, 16, "Hitachi, Ltd Japan" },
// E0 04 xx
// 04 = Manufacturer code (Philips/NXP)
// XX = IC id (Chip ID Family)
//I-Code SLI SL2 ICS20 [IC id = 01]
//I-Code SLI-S [IC id = 02]
//I-Code SLI-L [IC id = 03]
//I-Code SLIX [IC id = 01 + bit36 set to 1 (starting from bit0 - different from normal SLI)]
//I-Code SLIX-S [IC id = 02 + bit36 set to 1]
//I-Code SLIX-L [IC id = 03 + bit36 set to 1]
{ 0xE004000000000000LL, 16, "NXP Semiconductors Germany (Philips)" },
{ 0xE004010000000000LL, 24, "NXP(Philips); IC SL2 ICS20/ICS21(SLI) ICS2002/ICS2102(SLIX)" },
{ 0xE004020000000000LL, 24, "NXP(Philips); IC SL2 ICS53/ICS54(SLI-S) ICS5302/ICS5402(SLIX-S)" },
{ 0xE004030000000000LL, 24, "NXP(Philips); IC SL2 ICS50/ICS51(SLI-L) ICS5002/ICS5102(SLIX-L)" },
// E0 05 XX .. .. ..
// 05 = Manufacturer code (Infineon)
// XX = IC id (Chip ID Family)
{ 0xE005000000000000LL, 16, "Infineon Technologies AG Germany" },
{ 0xE005A10000000000LL, 24, "Infineon; SRF55V01P [IC id = 161] plain mode 1kBit"},
{ 0xE005A80000000000LL, 24, "Infineon; SRF55V01P [IC id = 168] pilot series 1kBit"},
{ 0xE005400000000000LL, 24, "Infineon; SRF55V02P [IC id = 64] plain mode 2kBit"},
{ 0xE005000000000000LL, 24, "Infineon; SRF55V10P [IC id = 00] plain mode 10KBit"},
{ 0xE005500000000000LL, 24, "Infineon; SRF55V02S [IC id = 80] secure mode 2kBit"},
{ 0xE005100000000000LL, 24, "Infineon; SRF55V10S [IC id = 16] secure mode 10KBit"},
{ 0xE0051E0000000000LL, 23, "Infineon; SLE66r01P [IC id = 3x = My-d Move or My-d move NFC]"},
{ 0xE005200000000000LL, 21, "Infineon; SLE66r01P [IC id = 3x = My-d Move or My-d move NFC]"},
{ 0xE006000000000000LL, 16, "Cylink USA" },
// E0 07 xx
// 07 = Texas Instruments
// XX = from bit 41 to bit 43 = product configuration - from bit 44 to bit 47 IC id (Chip ID Family)
//Tag IT RFIDType-I Plus, 2kBit, TI Inlay
//Tag-it HF-I Plus Inlay [IC id = 00] -> b'0000 000 2kBit
//Tag-it HF-I Plus Chip [IC id = 64] -> b'1000 000 2kBit
//Tag-it HF-I Standard Chip / Inlays [IC id = 96] -> b'1100 000 256Bit
//Tag-it HF-I Pro Chip / Inlays [IC id = 98] -> b'1100 010 256Bit, Password protection
{ 0xE007000000000000LL, 16, "Texas Instrument France" },
{ 0xE007000000000000LL, 20, "Texas Instrument; Tag-it HF-I Plus Inlay; 64x32bit" },
{ 0xE007100000000000LL, 20, "Texas Instrument; Tag-it HF-I Plus Chip; 64x32bit" },
{ 0xE007800000000000LL, 23, "Texas Instrument; Tag-it HF-I Plus (RF-HDT-DVBB tag or Third Party Products)" },
{ 0xE007C00000000000LL, 23, "Texas Instrument; Tag-it HF-I Standard; 8x32bit" },
{ 0xE007C40000000000LL, 23, "Texas Instrument; Tag-it HF-I Pro; 8x23bit; password" },
{ 0xE008000000000000LL, 16, "Fujitsu Limited Japan" },
{ 0xE009000000000000LL, 16, "Matsushita Electronics Corporation, Semiconductor Company Japan" },
{ 0xE00A000000000000LL, 16, "NEC Japan" },
{ 0xE00B000000000000LL, 16, "Oki Electric Industry Co. Ltd Japan" },
{ 0xE00C000000000000LL, 16, "Toshiba Corp. Japan" },
{ 0xE00D000000000000LL, 16, "Mitsubishi Electric Corp. Japan" },
{ 0xE00E000000000000LL, 16, "Samsung Electronics Co. Ltd Korea" },
{ 0xE00F000000000000LL, 16, "Hynix / Hyundai, Korea" },
{ 0xE010000000000000LL, 16, "LG-Semiconductors Co. Ltd Korea" },
{ 0xE011000000000000LL, 16, "Emosyn-EM Microelectronics USA" },
{ 0xE012000000000000LL, 16, "HID Corporation" },
{ 0xE012000000000000LL, 16, "INSIDE Technology France" },
{ 0xE013000000000000LL, 16, "ORGA Kartensysteme GmbH Germany" },
{ 0xE014000000000000LL, 16, "SHARP Corporation Japan" },
{ 0xE015000000000000LL, 16, "ATMEL France" },
{ 0xE016000000000000LL, 16, "EM Microelectronic-Marin SA Switzerland (Skidata)"},
{ 0xE016040000000000LL, 24, "EM-Marin SA (Skidata Keycard-eco); EM4034 [IC id = 01] (Read/Write - no AFI)"},
{ 0xE0160C0000000000LL, 24, "EM-Marin SA (Skidata); EM4035 [IC id = 03] (Read/Write - replaced by 4233)"},
{ 0xE016100000000000LL, 24, "EM-Marin SA (Skidata); EM4135 [IC id = 04] (Read/Write - replaced by 4233) 36x64bit start page 13"},
{ 0xE016140000000000LL, 24, "EM-Marin SA (Skidata); EM4036 [IC id = 05] 28pF"},
{ 0xE016180000000000LL, 24, "EM-Marin SA (Skidata); EM4006 [IC id = 06] (Read Only)"},
{ 0xE0161C0000000000LL, 24, "EM-Marin SA (Skidata); EM4133 [IC id = 07] 23,5pF (Read/Write)"},
{ 0xE016200000000000LL, 24, "EM-Marin SA (Skidata); EM4033 [IC id = 08] 23,5pF (Read Only - no AFI / no DSFID / no security blocks)"},
{ 0xE016240000000000LL, 24, "EM-Marin SA (Skidata); EM4233 [IC id = 09] 23,5pF CustomerID-102"},
{ 0xE016280000000000LL, 24, "EM-Marin SA (Skidata); EM4233 SLIC [IC id = 10] 23,5pF (1Kb flash memory - not provide High Security mode and QuietStorage feature)" },
{ 0xE0163C0000000000LL, 24, "EM-Marin SA (Skidata); EM4237 [IC id = 15] 23,5pF"},
{ 0xE0167C0000000000LL, 24, "EM-Marin SA (Skidata); EM4233 [IC id = 31] 95pF"},
{ 0xE016940000000000LL, 24, "EM-Marin SA (Skidata); EM4036 [IC id = 37] 95pF 51x64bit "},
{ 0xE0169c0000000000LL, 24, "EM-Marin SA (Skidata); EM4133 [IC id = 39] 95pF (Read/Write)" },
{ 0xE016A80000000000LL, 24, "EM-Marin SA (Skidata); EM4233 SLIC [IC id = 42] 97pF" },
{ 0xE016BC0000000000LL, 24, "EM-Marin SA (Skidata); EM4237 [IC id = 47] 97pF" },
{ 0xE017000000000000LL, 16, "KSW Microtec GmbH Germany" },
{ 0xE018000000000000LL, 16, "ZMD AG Germany" },
{ 0xE019000000000000LL, 16, "XICOR, Inc. USA" },
{ 0xE01A000000000000LL, 16, "Sony Corporation Japan Identifier Company Country" },
{ 0xE01B000000000000LL, 16, "Malaysia Microelectronic Solutions Sdn. Bhd Malaysia" },
{ 0xE01C000000000000LL, 16, "Emosyn USA" },
{ 0xE01D000000000000LL, 16, "Shanghai Fudan Microelectronics Co. Ltd. P.R. China" },
{ 0xE01E000000000000LL, 16, "Magellan Technology Pty Limited Australia" },
{ 0xE01F000000000000LL, 16, "Melexis NV BO Switzerland" },
{ 0xE020000000000000LL, 16, "Renesas Technology Corp. Japan" },
{ 0xE021000000000000LL, 16, "TAGSYS France" },
{ 0xE022000000000000LL, 16, "Transcore USA" },
{ 0xE023000000000000LL, 16, "Shanghai belling corp., ltd. China" },
{ 0xE024000000000000LL, 16, "Masktech Germany Gmbh Germany" },
{ 0xE025000000000000LL, 16, "Innovision Research and Technology Plc UK" },
{ 0xE026000000000000LL, 16, "Hitachi ULSI Systems Co., Ltd. Japan" },
{ 0xE027000000000000LL, 16, "Cypak AB Sweden" },
{ 0xE028000000000000LL, 16, "Ricoh Japan" },
{ 0xE029000000000000LL, 16, "ASK France" },
{ 0xE02A000000000000LL, 16, "Unicore Microsystems, LLC Russian Federation" },
{ 0xE02B000000000000LL, 16, "Dallas Semiconductor/Maxim USA" },
{ 0xE02C000000000000LL, 16, "Impinj, Inc. USA" },
{ 0xE02D000000000000LL, 16, "RightPlug Alliance USA" },
{ 0xE02E000000000000LL, 16, "Broadcom Corporation USA" },
{ 0xE02F000000000000LL, 16, "MStar Semiconductor, Inc Taiwan, ROC" },
{ 0xE030000000000000LL, 16, "BeeDar Technology Inc. USA" },
{ 0xE031000000000000LL, 16, "RFIDsec Denmark" },
{ 0xE032000000000000LL, 16, "Schweizer Electronic AG Germany" },
{ 0xE033000000000000LL, 16, "AMIC Technology Corp Taiwan" },
{ 0xE034000000000000LL, 16, "Mikron JSC Russia" },
{ 0xE035000000000000LL, 16, "Fraunhofer Institute for Photonic Microsystems Germany" },
{ 0xE036000000000000LL, 16, "IDS Microchip AG Switzerland" },
{ 0xE037000000000000LL, 16, "Kovio USA" },
{ 0xE038000000000000LL, 16, "HMT Microelectronic Ltd Switzerland Identifier Company Country" },
{ 0xE039000000000000LL, 16, "Silicon Craft Technology Thailand" },
{ 0xE03A000000000000LL, 16, "Advanced Film Device Inc. Japan" },
{ 0xE03B000000000000LL, 16, "Nitecrest Ltd UK" },
{ 0xE03C000000000000LL, 16, "Verayo Inc. USA" },
{ 0xE03D000000000000LL, 16, "HID Global USA" },
{ 0xE03E000000000000LL, 16, "Productivity Engineering Gmbh Germany" },
{ 0xE03F000000000000LL, 16, "Austriamicrosystems AG (reserved) Austria" },
{ 0xE040000000000000LL, 16, "Gemalto SA France" },
{ 0xE041000000000000LL, 16, "Renesas Electronics Corporation Japan" },
{ 0xE042000000000000LL, 16, "3Alogics Inc Korea" },
{ 0xE043000000000000LL, 16, "Top TroniQ Asia Limited Hong Kong" },
{ 0xE044000000000000LL, 16, "Gentag Inc (USA) USA" },
{ 0,0,"no tag-info available" } // must be the last entry
};
// fast method to just read the UID of a tag (collission detection not supported)
// *buf should be large enough to fit the 64bit uid
// returns 1 if suceeded
int getUID(uint8_t *buf) {
UsbCommand resp;
UsbCommand c = {CMD_ISO_15693_COMMAND, {0, 1, 1}}; // len,speed,recv?
c.d.asBytes[0] = ISO15_REQ_SUBCARRIER_SINGLE | ISO15_REQ_DATARATE_HIGH | ISO15_REQ_INVENTORY | ISO15_REQINV_SLOT1;
c.d.asBytes[1] = ISO15_CMD_INVENTORY;
c.d.asBytes[2] = 0; // mask length
AddCrc(c.d.asBytes, 3);
c.arg[0] = 5; // len
uint8_t retry;
// don't give up the at the first try
for (retry = 0; retry < 3; retry++) {
clearCommandBuffer();
SendCommand(&c);
if (WaitForResponseTimeout(CMD_ACK, &resp, 2000)) {
uint8_t resplen = resp.arg[0];
if (resplen >= 12 && CheckCrc(resp.d.asBytes, 12)) {
memcpy(buf, resp.d.asBytes + 2, 8);
return 1;
}
}
} // retry
if ( retry >= 3 )
PrintAndLogEx(WARNING, "timeout while waiting for reply.");
return 0;
}
// get a product description based on the UID
// uid[8] tag uid
// returns description of the best match
static char* getTagInfo_15(uint8_t *uid) {
uint64_t myuid, mask;
int i = 0, best = -1;
memcpy(&myuid, uid, sizeof(uint64_t));
while (uidmapping[i].mask > 0) {
mask = (~0LL) << (64-uidmapping[i].mask);
if ((myuid & mask) == uidmapping[i].uid) {
if (best == -1) {
best = i;
} else {
if (uidmapping[i].mask > uidmapping[best].mask) {
best=i;
}
}
}
i++;
}
if (best >= 0)
return uidmapping[best].desc;
return uidmapping[i].desc;
}
// return a clear-text message to an errorcode
static char* TagErrorStr(uint8_t error) {
switch (error) {
case 0x01: return "The command is not supported";
case 0x02: return "The command is not recognised";
case 0x03: return "The option is not supported.";
case 0x0f: return "Unknown error.";
case 0x10: return "The specified block is not available (doesn't exist).";
case 0x11: return "The specified block is already -locked and thus cannot be locked again";
case 0x12: return "The specified block is locked and its content cannot be changed.";
case 0x13: return "The specified block was not successfully programmed.";
case 0x14: return "The specified block was not successfully locked.";
default: return "Reserved for Future Use or Custom command error.";
}
}
int usage_15_demod(void){
PrintAndLogEx(NORMAL, "Tries to demodulate / decode ISO15693, from downloaded samples.\n"
"Gather samples with 'hf 15 read' / 'hf 15 record'");
return 0;
}
int usage_15_samples(void){
PrintAndLogEx(NORMAL, "Acquire samples as Reader (enables carrier, send inquiry\n"
"and download it to graphbuffer. Try 'hf 15 demod' to try to demodulate/decode signal");
return 0;
}
int usage_15_info(void){
PrintAndLogEx(NORMAL, "Uses the optional command 'get_systeminfo' 0x2B to try and extract information\n"
"command may fail, depending on tag.\n"
"defaults to '1 out of 4' mode\n"
"\n"
"Usage: hf 15 info [options] <uid|s|u|*>\n"
"Options:\n"
"\t-2 use slower '1 out of 256' mode\n"
"\tuid (either): \n"
"\t <8B hex> full UID eg E011223344556677\n"
"\t u unaddressed mode\n"
"\t * scan for tag\n"
"Examples:\n"
"\thf 15 info u");
return 0;
}
int usage_15_record(void){
PrintAndLogEx(NORMAL, "Record activity without enableing carrier");
return 0;
}
int usage_15_reader(void){
PrintAndLogEx(NORMAL, "This command identifies a ISO 15693 tag\n"
"\n"
"Usage: hf 15 reader [h]\n"
"Options:\n"
"\th this help\n"
"\n"
"Example:\n"
"\thf 15 reader");
return 0;
}
int usage_15_sim(void){
PrintAndLogEx(NORMAL, "Usage: hf 15 sim <UID>\n"
"\n"
"Example:\n"
"\thf 15 sim E016240000000000");
return 0;
}
int usage_15_findafi(void){
PrintAndLogEx(NORMAL, "'hf 15 finafi' This command needs a helptext. Feel free to add one!");
return 0;
}
int usage_15_dump(void){
PrintAndLogEx(NORMAL, "This command dumps the contents of a ISO-15693 tag and save it to file\n"
"\n"
"Usage: hf 15 dump [h] <f filname> \n"
"Options:\n"
"\th this help\n"
"\tf <name> filename, if no <name> UID will be used as filename\n"
"\n"
"Example:\n"
"\thf 15 dump f\n"
"\thf 15 dump f mydump");
return 0;
}
int usage_15_restore(void){
char *options[][2]={
{"h", "this help"},
{"-2", "use slower '1 out of 256' mode"},
{"-o", "set OPTION Flag (needed for TI)"},
{"r <NUM>", "numbers of retries on error, default is 3"},
{"u <UID>", "load hf-15-dump-<UID>.bin"},
{"f <filename>", "load <filename>"},
{"b <block size>", "block size, default is 4"}
};
PrintAndLogEx(NORMAL, "Usage: hf 15 restore [-2] [-o] [h] [r <NUM>] [u <UID>] [f <filename>] [b <block size>]");
PrintAndLogOptions(options, 7, 3);
return 0;
}
int usage_15_raw(void){
char *options[][2]={
{"-r", "do not read response" },
{"-2", "use slower '1 out of 256' mode" },
{"-c", "calculate and append CRC" },
{"", "Tip: turn on debugging for verbose output"},
};
PrintAndLogEx(NORMAL, "Usage: hf 15 raw [-r] [-2] [-c] <0A 0B 0C ... hex>\n");
PrintAndLogOptions(options, 4, 3);
return 0;
}
int usage_15_read(void){
PrintAndLogEx(NORMAL, "Usage: hf 15 read [options] <uid|s|u|*> <page#>\n"
"Options:\n"
"\t-2 use slower '1 out of 256' mode\n"
"\tuid (either): \n"
"\t <8B hex> full UID eg E011223344556677\n"
"\t u unaddressed mode\n"
"\t * scan for tag\n"
"\tpage#: page number 0-255");
return 0;
}
int usage_15_write(void){
PrintAndLogEx(NORMAL, "Usage: hf 15 write [options] <uid|s|u|*> <page#> <hexdata>\n"
"Options:\n"
"\t-2 use slower '1 out of 256' mode\n"
"\t-o set OPTION Flag (needed for TI)\n"
"\tuid (either): \n"
"\t <8B hex> full UID eg E011223344556677\n"
"\t u unaddressed mode\n"
"\t * scan for tag\n"
"\tpage#: page number 0-255\n"
"\thexdata: data to be written eg AA BB CC DD");
return 0;
}
int usage_15_readmulti(void){
PrintAndLogEx(NORMAL, "Usage: hf 15 readmulti [options] <uid|s|u|*> <start#> <count#>\n"
"Options:\n"
"\t-2 use slower '1 out of 256' mode\n"
"\tuid (either): \n"
"\t <8B hex> full UID eg E011223344556677\n"
"\t u unaddressed mode\n"
"\t * scan for tag\n"
"\tstart#: page number to start 0-255\n"
"\tcount#: number of pages");
return 0;
}
// Mode 3
//helptext
int CmdHF15Demod(const char *Cmd) {
char cmdp = tolower(param_getchar(Cmd, 0));
if (cmdp == 'h') return usage_15_demod();
// The sampling rate is 106.353 ksps/s, for T = 18.8 us
int i, j;
int max = 0, maxPos = 0;
int skip = 4;
if (GraphTraceLen < 1000) return 0;
// First, correlate for SOF
for (i = 0; i < 1000; i++) {
int corr = 0;
for (j = 0; j < ARRAYLEN(FrameSOF); j += skip) {
corr += FrameSOF[j] * GraphBuffer[i + (j / skip)];
}
if (corr > max) {
max = corr;
maxPos = i;
}
}
PrintAndLogEx(NORMAL, "SOF at %d, correlation %d", maxPos, max / (ARRAYLEN(FrameSOF) / skip));
i = maxPos + ARRAYLEN(FrameSOF) / skip;
int k = 0;
uint8_t outBuf[20];
memset(outBuf, 0, sizeof(outBuf));
uint8_t mask = 0x01;
for (;;) {
int corr0 = 0, corr1 = 0, corrEOF = 0;
for (j = 0; j < ARRAYLEN(Logic0); j += skip) {
corr0 += Logic0[j] * GraphBuffer[i + (j / skip)];
}
for (j = 0; j < ARRAYLEN(Logic1); j += skip) {
corr1 += Logic1[j] * GraphBuffer[i + (j / skip)];
}
for (j = 0; j < ARRAYLEN(FrameEOF); j += skip) {
corrEOF += FrameEOF[j] * GraphBuffer[i + (j / skip)];
}
// Even things out by the length of the target waveform.
corr0 *= 4;
corr1 *= 4;
if (corrEOF > corr1 && corrEOF > corr0) {
PrintAndLogEx(NORMAL, "EOF at %d", i);
break;
} else if (corr1 > corr0) {
i += ARRAYLEN(Logic1) / skip;
outBuf[k] |= mask;
} else {
i += ARRAYLEN(Logic0) / skip;
}
mask <<= 1;
if (mask == 0) {
k++;
mask = 0x01;
}
if ((i + (int)ARRAYLEN(FrameEOF)) >= GraphTraceLen) {
PrintAndLogEx(NORMAL, "ran off end!");
break;
}
}
if (mask != 0x01) {
PrintAndLogEx(WARNING, "Error, uneven octet! (discard extra bits!)");
PrintAndLogEx(NORMAL, " mask = %02x", mask);
}
PrintAndLogEx(NORMAL, "%d octets", k);
for (i = 0; i < k; i++)
PrintAndLogEx(NORMAL, "# %2d: %02x ", i, outBuf[i]);
PrintAndLogEx(NORMAL, "CRC %04x", Crc(outBuf, k - 2));
return 0;
}
// * Acquire Samples as Reader (enables carrier, sends inquiry)
//helptext
int CmdHF15Samples(const char *Cmd) {
char cmdp = param_getchar(Cmd, 0);
if (cmdp == 'h' || cmdp == 'H') return usage_15_samples();
UsbCommand c = {CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693, {0,0,0}};
clearCommandBuffer();
SendCommand(&c);
//download samples
getSamples(0, false);
return 0;
}
/**
* Commandline handling: HF15 CMD SYSINFO
* get system information from tag/VICC
*/
int CmdHF15Info(const char *Cmd) {
char cmdp = param_getchar(Cmd, 0);
if (strlen(Cmd)<1 || cmdp == 'h' || cmdp == 'H') return usage_15_info();
UsbCommand resp;
uint8_t *recv;
UsbCommand c = {CMD_ISO_15693_COMMAND, {0, 1, 1}}; // len,speed,recv?
uint8_t *req = c.d.asBytes;
char cmdbuf[100];
char *cmd = cmdbuf;
memset(cmdbuf, 0, sizeof(cmdbuf));
strncpy(cmd, Cmd, 99);
if ( !prepareHF15Cmd(&cmd, &c, ISO15_CMD_SYSINFO) )
return 0;
AddCrc(req, c.arg[0]);
c.arg[0] += 2;
//PrintAndLogEx(NORMAL, "cmd %s", sprint_hex(c.d.asBytes, reqlen) );
clearCommandBuffer();
SendCommand(&c);
if ( !WaitForResponseTimeout(CMD_ACK, &resp, 2000) ) {
PrintAndLogEx(WARNING, "iso15693 card select failed");
return 1;
}
uint32_t status = resp.arg[0];
if ( status < 2 ) {
PrintAndLogEx(WARNING, "iso15693 card doesn't answer to systeminfo command");
return 1;
}
recv = resp.d.asBytes;
if ( recv[0] & ISO15_RES_ERROR ) {
PrintAndLogEx(WARNING, "iso15693 card returned error %i: %s", recv[0], TagErrorStr(recv[0]));
return 3;
}
PrintAndLogEx(NORMAL, " UID : %s", sprintUID(NULL, recv+2));
PrintAndLogEx(NORMAL, " TYPE : %s", getTagInfo_15(recv+2));
PrintAndLogEx(NORMAL, " SYSINFO : %s", sprint_hex(recv, status-2));
// DSFID
if (recv[1] & 0x01)
PrintAndLogEx(NORMAL, " - DSFID supported [0x%02X]", recv[10]);
else
PrintAndLogEx(NORMAL, " - DSFID not supported");
// AFI
if (recv[1] & 0x02)
PrintAndLogEx(NORMAL, " - AFI supported [0x%02X]", recv[11]);
else
PrintAndLogEx(NORMAL, " - AFI not supported");
// IC reference
if (recv[1] & 0x08)
PrintAndLogEx(NORMAL, " - IC reference supported [0x%02X]", recv[14]);
else
PrintAndLogEx(NORMAL, " - IC reference not supported");
// memory
if (recv[1] & 0x04) {
PrintAndLogEx(NORMAL, " - Tag provides info on memory layout (vendor dependent)");
uint8_t blocks = recv[12]+1;
uint8_t size = (recv[13] & 0x1F);
PrintAndLogEx(NORMAL, " %u (or %u) bytes/blocks x %u blocks", size+1, size, blocks );
} else {
PrintAndLogEx(NORMAL, " - Tag does not provide information on memory layout");
}
PrintAndLogEx(NORMAL, "\n");
return 0;
}
// Record Activity without enabeling carrier
//helptext
int CmdHF15Record(const char *Cmd) {
char cmdp = tolower(param_getchar(Cmd, 0));
if (cmdp == 'h') return usage_15_record();
UsbCommand c = {CMD_RECORD_RAW_ADC_SAMPLES_ISO_15693, {0,0,0}};
clearCommandBuffer();
SendCommand(&c);
return 0;
}
// used with 'hf search'
int HF15Reader(const char *Cmd, bool verbose) {
uint8_t uid[8] = {0,0,0,0,0,0,0,0};
if (!getUID(uid)) {
if (verbose) PrintAndLogEx(WARNING, "No tag found.");
return 0;
}
PrintAndLogEx(NORMAL, " UID : %s", sprintUID(NULL, uid));
PrintAndLogEx(NORMAL, " TYPE : %s", getTagInfo_15(uid));
return 1;
}
int CmdHF15Reader(const char *Cmd) {
char cmdp = tolower(param_getchar(Cmd, 0));
if (cmdp == 'h') return usage_15_reader();
HF15Reader(Cmd, true);
return 0;
}
// Simulation is still not working very good
// helptext
int CmdHF15Sim(const char *Cmd) {
char cmdp =tolower(param_getchar(Cmd, 0));
if (strlen(Cmd) < 1 || cmdp == 'h') return usage_15_sim();
uint8_t uid[8] = {0,0,0,0,0,0,0,0};
if (param_gethex(Cmd, 0, uid, 16)) {
PrintAndLogEx(WARNING, "UID must include 16 HEX symbols");
return 0;
}
PrintAndLogEx(SUCCESS, "Starting simulating UID %s", sprint_hex(uid, sizeof(uid)) );
UsbCommand c = {CMD_SIMTAG_ISO_15693, {0, 0, 0}};
memcpy(c.d.asBytes, uid, 8);
clearCommandBuffer();
SendCommand(&c);
return 0;
}
// finds the AFI (Application Family Idendifier) of a card, by trying all values
// (There is no standard way of reading the AFI, allthough some tags support this)
// helptext
int CmdHF15Afi(const char *Cmd) {
char cmdp = tolower(param_getchar(Cmd, 0));
if (cmdp == 'h') return usage_15_findafi();
PrintAndLogEx(SUCCESS, "press pm3-button to cancel");
UsbCommand c = {CMD_ISO_15693_FIND_AFI, {strtol(Cmd, NULL, 0), 0, 0}};
clearCommandBuffer();
SendCommand(&c);
return 0;
}
typedef struct {
uint8_t lock;
uint8_t block[4];
} t15memory;
// Reads all memory pages
// need to write to file
int CmdHF15Dump(const char*Cmd) {
uint8_t fileNameLen = 0;
char filename[FILE_PATH_SIZE] = {0};
char * fptr = filename;
bool errors = false;
uint8_t cmdp = 0;
uint8_t uid[8] = {0,0,0,0,0,0,0,0};
while(param_getchar(Cmd, cmdp) != 0x00 && !errors) {
switch (tolower(param_getchar(Cmd, cmdp))) {
case 'h':
return usage_15_dump();
case 'f':
fileNameLen = param_getstr(Cmd, cmdp+1, filename, FILE_PATH_SIZE);
cmdp += 2;
break;
default:
PrintAndLogEx(WARNING, "Unknown parameter '%c'\n", param_getchar(Cmd, cmdp));
errors = true;
break;
}
}
//Validations
if (errors) return usage_15_dump();
if (fileNameLen < 1) {
PrintAndLogEx(INFO, "Using UID as filename");
if (!getUID(uid)) {
PrintAndLogEx(WARNING, "No tag found.");
return 1;
}
fptr += sprintf(fptr, "hf-15-");
FillFileNameByUID(fptr,uid,"-dump",sizeof(uid));
}
// detect blocksize from card :)
PrintAndLogEx(NORMAL, "Reading memory from tag UID " _YELLOW_(%s), sprintUID(NULL, uid));
int blocknum = 0;
uint8_t *recv = NULL;
// memory.
t15memory mem[256];
uint8_t data[256*4] = {0};
memset(data, 0, sizeof(data));
UsbCommand resp;
UsbCommand c = {CMD_ISO_15693_COMMAND, {0, 1, 1}}; // len,speed,recv?
uint8_t *req = c.d.asBytes;
req[0] = ISO15_REQ_SUBCARRIER_SINGLE | ISO15_REQ_DATARATE_HIGH | ISO15_REQ_NONINVENTORY | ISO15_REQ_ADDRESS;
req[1] = ISO15_CMD_READ;
// copy uid to read command
memcpy(req+2, uid, sizeof(uid));
for (int retry = 0; retry < 5; retry++) {
req[10] = blocknum;
AddCrc(req, 11);
c.arg[0] = 13;
clearCommandBuffer();
SendCommand(&c);
if (WaitForResponseTimeout(CMD_ACK, &resp, 2000)) {
uint8_t len = resp.arg[0];
if ( len < 2 ) {
PrintAndLogEx(FAILED, "iso15693 card select failed");
continue;
}
recv = resp.d.asBytes;
if ( !CheckCrc(recv, len) ) {
PrintAndLogEx(FAILED, "crc fail");
continue;
}
if (recv[0] & ISO15_RES_ERROR) {
PrintAndLogEx(FAILED, "Tag returned Error %i: %s", recv[1], TagErrorStr(recv[1]) );
break;
}
mem[blocknum].lock = resp.d.asBytes[0];
memcpy(mem[blocknum].block, resp.d.asBytes + 1, 4);
memcpy(data + (blocknum * 4), resp.d.asBytes + 1, 4);
retry = 0;
blocknum++;
printf("."); fflush(stdout);
}
}
PrintAndLogEx(NORMAL, "\n");
PrintAndLogEx(NORMAL, "block# | data |lck| ascii");
PrintAndLogEx(NORMAL, "---------+--------------+---+----------");
for (int i = 0; i < blocknum; i++) {
PrintAndLogEx(NORMAL, "%3d/0x%02X | %s | %d | %s", i, i, sprint_hex(mem[i].block, 4 ), mem[i].lock, sprint_ascii(mem[i].block, 4) );
}
PrintAndLogEx(NORMAL, "\n");
size_t datalen = blocknum * 4;
saveFileEML(filename, "eml", data, datalen, 4);
saveFile(filename, "bin", data, datalen);
return 0;
}
int CmdHF15Restore(const char*Cmd) {
FILE *f;
uint8_t uid[8]={0x00};
char filename[FILE_PATH_SIZE] = {0x00};
char buff[255] = {0x00};
size_t blocksize=4;
uint8_t cmdp = 0;
char newCmdPrefix[255] = {0x00}, tmpCmd[255] = {0x00};
char param[FILE_PATH_SIZE]="";
char hex[255]="";
uint8_t retries = 3, tried = 0, i = 0;
int retval=0;
size_t bytes_read;
while(param_getchar(Cmd, cmdp) != 0x00) {
switch(tolower(param_getchar(Cmd, cmdp))) {
case '-':
param_getstr(Cmd, cmdp, param, sizeof(param));
switch(param[1])
{
case '2':
case 'o':
strncpy(newCmdPrefix, " ", sizeof(newCmdPrefix)-1);
strncat(newCmdPrefix, param, sizeof(newCmdPrefix)-1);
break;
default:
PrintAndLogEx(WARNING, "Unknown parameter '%s'", param);
return usage_15_restore();
}
break;
case 'f':
param_getstr(Cmd, cmdp+1, filename, FILE_PATH_SIZE);
cmdp++;
break;
case 'r':
retries=param_get8ex(Cmd, cmdp+1, 3, 10);
cmdp++;
break;
case 'b':
blocksize=param_get8ex(Cmd, cmdp+1, 4, 10);
cmdp++;
break;
case 'u':
param_getstr(Cmd, cmdp+1, buff, FILE_PATH_SIZE);
cmdp++;
snprintf(filename,sizeof(filename),"hf-15-dump-%s-bin",buff);
break;
case 'h':
return usage_15_restore();
default:
PrintAndLogEx(WARNING, "Unknown parameter '%c'", param_getchar(Cmd, cmdp));
return usage_15_restore();
}
cmdp++;
}
PrintAndLogEx(INFO,"Blocksize: %u",blocksize);
if ( !strlen(filename)) {
PrintAndLogEx(WARNING,"Please provide a filename");
return usage_15_restore();
}
if ((f = fopen(filename, "rb")) == NULL) {
PrintAndLogEx(WARNING, "Could not find file %s", filename);
return 2;
}
if (!getUID(uid)) {
PrintAndLogEx(WARNING, "No tag found");
fclose(f);
return 3;
}
while (1) {
tried = 0;
hex[0] = 0x00;
tmpCmd[0] = 0x00;
bytes_read = fread( buff, 1, blocksize, f );
if ( bytes_read == 0) {
PrintAndLogEx(SUCCESS, "File reading done `%s`", filename);
fclose(f);
return 0;
} else if ( bytes_read != blocksize) {
PrintAndLogEx(WARNING, "File reading error (%s), %u bytes read instead of %u bytes.", filename, bytes_read, blocksize);
fclose(f);
return 2;
}
for(int j=0; j < blocksize; j++)
snprintf(hex+j*2, 3, "%02X", buff[j]);
for(int j=0; j < sizeof(uid)/sizeof(uid[0]); j++)
snprintf(buff+j*2,3,"%02X", uid[j]);
//TODO: Addressed mode currently not work
//snprintf(tmpCmd, sizeof(tmpCmd), "%s %s %d %s", newCmdPrefix, buff, i, hex);
snprintf(tmpCmd, sizeof(tmpCmd), "%s u %u %s", newCmdPrefix, i, hex);
PrintAndLogEx(DEBUG, "Command to be sent| %s", tmpCmd);
for(tried=0; tried < retries; tried++)
if(!(retval = CmdHF15Write(tmpCmd)))
break;
if(tried >= retries)
return retval;
i++;
}
fclose(f);
}
int CmdHF15List(const char *Cmd) {
//PrintAndLogEx(WARNING, "Deprecated command, use 'hf list 15' instead");
CmdTraceList("15");
return 0;
}
int CmdHF15Raw(const char *Cmd) {
char cmdp = param_getchar(Cmd, 0);
if (strlen(Cmd)<3 || cmdp == 'h' || cmdp == 'H') return usage_15_raw();
UsbCommand resp;
UsbCommand c = {CMD_ISO_15693_COMMAND, {0, 1, 1}}; // len,speed,recv?
int reply = 1, fast = 1, i = 0;
bool crc = false;
char buf[5] = "";
uint8_t data[100];
uint32_t datalen = 0, temp;
// strip
while (*Cmd==' ' || *Cmd=='\t') Cmd++;
while (Cmd[i]!='\0') {
if (Cmd[i]==' ' || Cmd[i]=='\t') { i++; continue; }
if (Cmd[i]=='-') {
switch (Cmd[i+1]) {
case 'r':
case 'R':
reply = 0;
break;
case '2':
fast = 0;
break;
case 'c':
case 'C':
crc = true;
break;
default:
PrintAndLogEx(WARNING, "Invalid option");
return 0;
}
i+=2;
continue;
}
if ((Cmd[i]>='0' && Cmd[i]<='9') ||
(Cmd[i]>='a' && Cmd[i]<='f') ||
(Cmd[i]>='A' && Cmd[i]<='F') ) {
buf[strlen(buf)+1] = 0;
buf[strlen(buf)] = Cmd[i];
i++;
if (strlen(buf) >= 2) {
sscanf(buf, "%x", &temp);
data[datalen] = (uint8_t)(temp & 0xff);
datalen++;
*buf = 0;
}
continue;
}
PrintAndLogEx(WARNING, "Invalid char on input");
return 0;
}
if (crc) {
AddCrc(data, datalen);
datalen += 2;
}
c.arg[0] = datalen;
c.arg[1] = fast;
c.arg[2] = reply;
memcpy(c.d.asBytes, data, datalen);
clearCommandBuffer();
SendCommand(&c);
if (reply) {
if (WaitForResponseTimeout(CMD_ACK, &resp, 2000)) {
uint8_t len = resp.arg[0];
PrintAndLogEx(NORMAL, "received %i octets", len);
PrintAndLogEx(NORMAL, "%s", sprint_hex(resp.d.asBytes, len) );
} else {
PrintAndLogEx(WARNING, "timeout while waiting for reply.");
}
}
return 0;
}
/**
* parses common HF 15 CMD parameters and prepares some data structures
* Parameters:
* **cmd command line
*/
int prepareHF15Cmd(char **cmd, UsbCommand *c, uint8_t iso15cmd) {
int temp;
uint8_t *req = c->d.asBytes;
uint8_t uid[8] = {0x00};
uint32_t reqlen = 0;
// strip
while (**cmd==' ' || **cmd=='\t') (*cmd)++;
if (strstr(*cmd, "-2") == *cmd) {
c->arg[1] = 0; // use 1of256
(*cmd) += 2;
}
// strip
while (**cmd==' ' || **cmd=='\t') (*cmd)++;
if (strstr(*cmd, "-o") == *cmd) {
req[reqlen] = ISO15_REQ_OPTION;
(*cmd) += 2;
}
// strip
while (**cmd == ' ' || **cmd == '\t') (*cmd)++;
switch (**cmd) {
case 0:
PrintAndLogEx(WARNING, "missing addr");
return 0;
break;
case 'u':
case 'U':
// unaddressed mode may not be supported by all vendors
req[reqlen++] |= ISO15_REQ_SUBCARRIER_SINGLE | ISO15_REQ_DATARATE_HIGH | ISO15_REQ_NONINVENTORY;
req[reqlen++] = iso15cmd;
break;
case '*':
// we scan for the UID ourself
req[reqlen++] |= ISO15_REQ_SUBCARRIER_SINGLE | ISO15_REQ_DATARATE_HIGH | ISO15_REQ_NONINVENTORY | ISO15_REQ_ADDRESS;
req[reqlen++] = iso15cmd;
if (!getUID(uid)) {
PrintAndLogEx(WARNING, "No tag found");
return 0;
}
memcpy(&req[reqlen], uid, sizeof(uid));
PrintAndLogEx(NORMAL, "Detected UID %s", sprintUID(NULL, uid));
reqlen += sizeof(uid);
break;
default:
req[reqlen++] |= ISO15_REQ_SUBCARRIER_SINGLE | ISO15_REQ_DATARATE_HIGH | ISO15_REQ_NONINVENTORY | ISO15_REQ_ADDRESS;
req[reqlen++] = iso15cmd;
// parse UID
for (int i=0; i<8 && (*cmd)[i*2] && (*cmd)[i*2+1]; i++) {
sscanf((char[]){(*cmd)[i*2], (*cmd)[i*2+1],0}, "%X", &temp);
uid[7-i] = temp & 0xff;
}
PrintAndLogEx(NORMAL, "Using UID %s", sprintUID(NULL, uid));
memcpy(&req[reqlen], uid, sizeof(uid));
reqlen += sizeof(uid);
break;
}
// skip to next space
while (**cmd!=' ' && **cmd!='\t') (*cmd)++;
// skip over the space
while (**cmd==' ' || **cmd=='\t') (*cmd)++;
c->arg[0] = reqlen;
return 1;
}
/**
* Commandline handling: HF15 CMD READMULTI
* Read multiple blocks at once (not all tags support this)
*/
int CmdHF15Readmulti(const char *Cmd) {
char cmdp = param_getchar(Cmd, 0);
if (strlen(Cmd)<3 || cmdp == 'h' || cmdp == 'H') return usage_15_readmulti();
UsbCommand resp;
uint8_t *recv;
UsbCommand c = {CMD_ISO_15693_COMMAND, {0, 1, 1}}; // len,speed,recv?
uint8_t *req = c.d.asBytes;
int reqlen = 0;
uint8_t pagenum, pagecount;
char cmdbuf[100];
char *cmd = cmdbuf;
strncpy(cmd, Cmd, 99);
if ( !prepareHF15Cmd(&cmd, &c, ISO15_CMD_READMULTI) )
return 0;
// add OPTION flag, in order to get lock-info
req[0] |= ISO15_REQ_OPTION;
reqlen = c.arg[0];
// decimal
pagenum = param_get8ex(cmd, 0, 0, 10);
pagecount = param_get8ex(cmd, 1, 0, 10);
//PrintAndLogEx(NORMAL, "ice %d %d\n", pagenum, pagecount);
// 0 means 1 page,
// 1 means 2 pages, ...
if (pagecount > 0) pagecount--;
req[reqlen++] = pagenum;
req[reqlen++] = pagecount;
AddCrc(req, reqlen);
c.arg[0] = reqlen+2;
clearCommandBuffer();
SendCommand(&c);
if ( !WaitForResponseTimeout(CMD_ACK, &resp, 2000) ) {
PrintAndLogEx(FAILED, "iso15693 card select failed");
return 1;
}
uint32_t status = resp.arg[0];
if ( status < 2 ) {
PrintAndLogEx(FAILED, "iso15693 card select failed");
return 1;
}
recv = resp.d.asBytes;
if (!CheckCrc(recv, status)) {
PrintAndLogEx(FAILED, "CRC failed");
return 2;
}
if ( recv[0] & ISO15_RES_ERROR ) {
PrintAndLogEx(FAILED, "iso15693 card returned error %i: %s", recv[0], TagErrorStr(recv[0]));
return 3;
}
int start = 1; // skip status byte
int stop = (pagecount+1) * 5;
int currblock = pagenum;
// print response
PrintAndLogEx(NORMAL, "");
PrintAndLogEx(NORMAL, "block# | data |lck| ascii");
PrintAndLogEx(NORMAL, "---------+--------------+---+----------");
for (int i = start; i < stop; i += 5) {
PrintAndLogEx(NORMAL, "%3d/0x%02X | %s | %d | %s", currblock, currblock, sprint_hex(recv+i+1, 4 ), recv[i], sprint_ascii(recv+i+1, 4) );
currblock++;
}
return 0;
}
/**
* Commandline handling: HF15 CMD READ
* Reads a single Block
*/
int CmdHF15Read(const char *Cmd) {
char cmdp = param_getchar(Cmd, 0);
if (strlen(Cmd)<3 || cmdp == 'h' || cmdp == 'H') return usage_15_read();
UsbCommand resp;
uint8_t *recv;
// UsbCommand arg: len, speed, recv?
// arg0 (datalen, cmd len? .arg0 == crc?)
// arg1 (speed == 0 == 1 of 256, == 1 == 1 of 4 )
// arg2 (recv == 1 == expect a response)
UsbCommand c = {CMD_ISO_15693_COMMAND, {0, 1, 1}};
uint8_t *req = c.d.asBytes;
int reqlen = 0, blocknum;
char cmdbuf[100];
char *cmd = cmdbuf;
strncpy(cmd, Cmd, 99);
if ( !prepareHF15Cmd(&cmd, &c, ISO15_CMD_READ) )
return 0;
// add OPTION flag, in order to get lock-info
req[0] |= ISO15_REQ_OPTION;
reqlen = c.arg[0];
blocknum = strtol(cmd, NULL, 0);
req[reqlen++] = (uint8_t)blocknum;
AddCrc(req, reqlen);
c.arg[0] = reqlen+2;
clearCommandBuffer();
SendCommand(&c);
if ( !WaitForResponseTimeout(CMD_ACK, &resp, 2000) ) {
PrintAndLogEx(NORMAL, "iso15693 card select failed");
return 1;
}
uint32_t status = resp.arg[0];
if ( status < 2 ) {
PrintAndLogEx(NORMAL, "iso15693 card select failed");
return 1;
}
recv = resp.d.asBytes;
if ( !CheckCrc(recv, status) ) {
PrintAndLogEx(NORMAL, "CRC failed");
return 2;
}
if ( recv[0] & ISO15_RES_ERROR ) {
PrintAndLogEx(WARNING, "iso15693 card returned error %i: %s", recv[0], TagErrorStr(recv[0]));
return 3;
}
// print response
PrintAndLogEx(NORMAL, "");
PrintAndLogEx(NORMAL, "block #%3d |lck| ascii", blocknum );
PrintAndLogEx(NORMAL, "------------+---+------" );
PrintAndLogEx(NORMAL, "%s| %d | %s", sprint_hex(recv+2, status-4), recv[1], sprint_ascii(recv+2, status-4) );
PrintAndLogEx(NORMAL, "");
return 0;
}
/**
* Commandline handling: HF15 CMD WRITE
* Writes a single Block - might run into timeout, even when successful
*/
int CmdHF15Write(const char *Cmd) {
char cmdp = param_getchar(Cmd, 0);
if (strlen(Cmd)<3 || cmdp == 'h' || cmdp == 'H') return usage_15_write();
UsbCommand resp;
uint8_t *recv;
UsbCommand c = {CMD_ISO_15693_COMMAND, {0, 1, 1}}; // len,speed,recv?
uint8_t *req = c.d.asBytes;
int reqlen = 0, pagenum, temp;
char cmdbuf[100];
char *cmd = cmdbuf;
char *cmd2;
strncpy(cmd, Cmd, 99);
if ( !prepareHF15Cmd(&cmd, &c, ISO15_CMD_WRITE) )
return 0;
reqlen = c.arg[0];
// *cmd -> page num ; *cmd2 -> data
cmd2=cmd;
while (*cmd2!=' ' && *cmd2!='\t' && *cmd2) cmd2++;
*cmd2 = 0;
cmd2++;
pagenum = strtol(cmd, NULL, 0);
req[reqlen++] = (uint8_t)pagenum;
while (cmd2[0] && cmd2[1]) { // hexdata, read by 2 hexchars
if (*cmd2==' ') {
cmd2++;
continue;
}
sscanf((char[]){cmd2[0],cmd2[1],0},"%X",&temp);
req[reqlen++]=temp & 0xff;
cmd2+=2;
}
AddCrc(req, reqlen);
c.arg[0] = reqlen+2;
PrintAndLogEx(NORMAL, "iso15693 writing to page %02d (0x%02X) | data ", pagenum, pagenum);
clearCommandBuffer();
SendCommand(&c);
if ( !WaitForResponseTimeout(CMD_ACK, &resp, 2000) ) {
PrintAndLogEx(FAILED, "iso15693 card timeout, data may be written anyway");
return 1;
}
uint32_t status = resp.arg[0];
if ( status < 2 ) {
PrintAndLogEx(FAILED, "iso15693 card select failed");
return 1;
}
recv = resp.d.asBytes;
if ( !CheckCrc(recv, status) ) {
PrintAndLogEx(FAILED, "CRC failed");
return 2;
}
if ( recv[0] & ISO15_RES_ERROR ) {
PrintAndLogEx(NORMAL, "iso15693 card returned error %i: %s", recv[0], TagErrorStr(recv[0]));
return 3;
}
PrintAndLogEx(NORMAL, "OK");
return 0;
}
static command_t CommandTable15[] = {
{"help", CmdHF15Help, 1, "This help"},
{"demod", CmdHF15Demod, 1, "Demodulate ISO15693 from tag"},
{"dump", CmdHF15Dump, 0, "Read all memory pages of an ISO15693 tag, save to file"},
{"findafi", CmdHF15Afi, 0, "Brute force AFI of an ISO15693 tag"},
{"info", CmdHF15Info, 0, "Tag information"},
{"list", CmdHF15List, 0, "[Deprecated] List ISO15693 history"},
{"raw", CmdHF15Raw, 0, "Send raw hex data to tag"},
{"reader", CmdHF15Reader, 0, "Act like an ISO15693 reader"},
{"record", CmdHF15Record, 0, "Record Samples (ISO15693)"},
{"restore", CmdHF15Restore, 0, "Restore from file to all memory pages of an ISO15693 tag"},
{"sim", CmdHF15Sim, 0, "Fake an ISO15693 tag"},
{"samples", CmdHF15Samples, 0, "Acquire Samples as Reader (enables carrier, sends inquiry)"},
{"read", CmdHF15Read, 0, "Read a block"},
{"write", CmdHF15Write, 0, "Write a block"},
{"readmulti", CmdHF15Readmulti, 0, "Reads multiple Blocks"},
{NULL, NULL, 0, NULL}
};
int CmdHF15(const char *Cmd) {
clearCommandBuffer();
CmdsParse(CommandTable15, Cmd);
return 0;
}
int CmdHF15Help(const char *Cmd) {
CmdsHelp(CommandTable15);
return 0;
}